Bedienungsanleitung Fostex PM0.4

Inhaltszusammenfassung zur Seite Nr. 1

p-2
Safety Instructions
p-3
Introduction & Unpacking
p-4
Setup Instructions
p-5
Setup Instructions - continued
p-5
Back Panel Overview
p-6
Product Specifications
p-6
Cable and Wiring Information
p-6
Product Cleaning Instructions
p-7
Declaration of EC Directive
PM0.4
- Reference Manual -
p-1
professional studio monitor

Inhaltszusammenfassung zur Seite Nr. 2

CAUTION: CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE RISK OF ELECTRIC SHOCK OF PLUG TO WIDE SLOT, FULLY INSERT. DO NOT OPEN ATTENTION: POUR EVITER LES CHOCS E LECTRIQUE S , CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DO NOT REMOVE COVER (OR BACK). DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. NO USER - SERVICEABLE PARTS INSIDE. The lightning flash with arrowhead symbol, within

Inhaltszusammenfassung zur Seite Nr. 3

Introduction Thank you for purchasing the Fostex PM0.4 Professional Studio Monitor. As with all Fostex products, the PM0.4 has been designed to provide superlative performance, unquestioned reliability and exceptionally high value. The PM0.4 was specifically engineered to fulfillall of your critical near-field monitoring needs and is emblematic of the years of experience Fostex has had in the professional audio marketplace. The PM0.4 takes full advantage of internal bi-amplification and employs

Inhaltszusammenfassung zur Seite Nr. 4

SetupInstructions Monitoring Distance = 1 to 2 meters After carefully unpacking the PM0.4 Professional Studio Monitor, it is now time to setup the monitors for the best acoustic performance in your studio. The PM0.4 was designed to be used at amonitoring distance of 1 to 2 meters, typically referred to as the near-field. Monitoring Height = the acoustic center aimed at seated ear height It is recommended that the PM0.4 be located in such a way that the acoustic center is located at, or about, se

Inhaltszusammenfassung zur Seite Nr. 5

L R I E S T R Setup Instructions continued Once the studio monitors have been placed in their final location, it is time to proceed to connecting your PM0.4 studio monitors to the mixing console or digital workstation. Connection to the PM0.4 can be made using RCA or TRS connectors. The gain control on the back of the monitor allows continuously variable adjustments to match most input types of line level signals (-10dBV for RCA un-balanced). The TRS input is balanced and is also compatible wi

Inhaltszusammenfassung zur Seite Nr. 6

Product Specifications Drivers Amplifier Power Low Frequency Driver: 4" Cone Speaker Low Frequency : 18 W High Frequency Driver: 5/8" Soft Dome Tweeter High Frequency : 18 W Cabinet Dimensions Amplifier Distortion 144mm (W) x 220mm (H) x 180mm (D) includes heatsink <0.005% THD @ 12 Watts / 4Ohm 20Hz-20kHz 165mm (D) x cabinet only - no heatsink 5 3/4" (W) x 8 11/16" (H) x 7 1/8" (D) includes heatsink Amplifier Signal to Noise Ratio 6 1/2" (D) x cabinet only - no heatsink >75dB 20Hz - 30kHz Not We

Inhaltszusammenfassung zur Seite Nr. 7

Declaration of EC Directive This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be used within the specified voltage range. The Affect of Immunity on This Equipment The affect of the European Specification EN61000-6-1 (coexistence of ele