Inhaltszusammenfassung zur Seite Nr. 1
Orderguide
®
Ergotron
CRT Monitor Arm
Mounting Solutions
Ergonomic solutions for any area of your facility
870-03-018, rev. 05/13/04
www.ergotron.com
© 2004 Ergotron, Inc.
Inhaltszusammenfassung zur Seite Nr. 2
Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or in part for any purpose other than that authorized by Ergotron, Inc. is prohibited. © 2004 Ergotron, Inc. All rights reserved.
Inhaltszusammenfassung zur Seite Nr. 3
Orderguide CRT Monitor Arm Mounting Solutions Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Line Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sample Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Monitor Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Fixed Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Introduction RT Monitor Arms have the ability to swing, rotate, tilt and lift Cmonitors up to 100 lbs (45.4 kg). These arms offer a wide range of vertical adjustment and horizontal extension capabilities, thus accommodating individual user heights and positioning needs. Ergotron’s Monitor Arms and Mounting Systems allow installation of a complete computer workstation in tight and congested areas while occupying little or no floor space. Several options are available. Mount your system to a floor
Inhaltszusammenfassung zur Seite Nr. 5
Product Line Overview Monitor Arms Mounting Systems Keyboard Solutions Keyboard Fixed Command Holders Arms Posts & Trays Suspend Lift 6" Suspension Wall Wrist Rests & Arms Tracks Mouse Pads 13" Horizontal 19" Horizontal 10" Lift Wall Arms Brackets Peripherals & Accessories 12" Suspension Desk CPU Holders Arms Mounts & Cabinets 16" Worksurfaces Arms Arm Components Lift Suspend N12 Arms Monitor Footrests for NEMA Caddies environments Extender Monitor Cable Arms Platforms Management Rotation
Inhaltszusammenfassung zur Seite Nr. 6
Sample Configurations Configure your own customized solutions with Ergotron’s modular components. Here are some examples of common configurations. Configuration A 20-078-000 Command Post, 4" x 4" x 96" Post 60-138-000 Base for 4" x 4" Post 60-155-000 Bracket for Arm to 4" x 4" Post 97-095-099 Second Component Fastener Kit 44-316-000 30" Extender Arm 44-308-000 12" Suspension Arm (2) 40-004-000 Monitor Caddy, Type 3 (2) 75-055-009 Adjustable Keyboard Tray Holder (2) 77-050-000 Keyboard Tray w
Inhaltszusammenfassung zur Seite Nr. 7
Sample Configurations Configure your own customized solutions with Ergotron’s modular components. Here are some examples of common configurations. Configuration D 31-018-182 Wall Track, 34"L 44-314-000 18" Extender Arm 60-188-099 Bracket for Arm to Wall Track 44-303-000 6" x 13" “B” Suspension Arm 40-004-000 Monitor Caddy, Type 3 80-058-000 Medium Vertical CPU Holder 60-156 Bracket for Peripheral to Wall Track 55-035-999 Peripheral Table 65-048-000 Fold-Away Underbracing for Peripheral Table
Inhaltszusammenfassung zur Seite Nr. 8
Monitor Arms Fixed Arms Fixed Arms swing, and rotate monitors to the point of need. Their tilt control extends a monitor’s vertical viewing range. These arms can be used with a Monitor Caddy in a suspend mode, or turned over and used with a Monitor Platform in a platform mode. Without Shroud Part Description Horizontal Length Weight With Shroud Number (pivot point to pivot point) Capacity 2.75 44-311-000 20" Fixed Arm 20" 100 lbs 22.75 without Shroud (508 mm) (45.4 kg) 20.00 1.68 5.23 7 5.64 4
Inhaltszusammenfassung zur Seite Nr. 9
Monitor Arms 10" Lift Arm This versatile arm offers lift, swing and rotate capabilities. It adjusts 10 inches (254 mm) vertically. Includes Monitor Platform and Quick-Release Tabs to secure the monitor in place. Mount to vertical surfaces or to horizontal surfaces. If mounting to a horizontal surface, choose the Desk Clamp, which attaches to an edge up to 3" (76 mm) thick, or the Grommet Mount, which attaches through a hole 3/8" to 3" (10 to 76 mm) wide and up to 4" (102 mm) thick. Part Descript
Inhaltszusammenfassung zur Seite Nr. 10
Monitor Arms 16" Suspension and Sixteen inches (406 mm) of vertical movement provides true ergonomic adjustability in sitting or Lift Arms standing applications. It even accommodates the average sit-to-stand height-range. This arm features clean styling and built-in cable management. It’s available as a suspension arm (use with Caddy) or a lift arm (use with Platform). Raise, swing, tilt or rotate your monitor. 16" Suspension Arm Part Description Horizontal Length Weight 24.76 21.69 Number (pi
Inhaltszusammenfassung zur Seite Nr. 11
Monitor Arms N12 Arm for NEMA The N12 Suspension Arm meets UL requirements for the NEMA standard, allowing you to mount Environments enclosures in NEMA 12 environments. Features include 16 inches (406 mm) of vertical adjustment and hassle-free cable management. An integrated quick-connect tube offers an industry proven universal connection interface while allowing continuous isolation of cables. Part Description Horizontal Length Weight Number (pivot point to pivot point) Capacity 44-360-000 N1
Inhaltszusammenfassung zur Seite Nr. 12
Arm Components Monitor Caddies Monitor Caddies are used in conjunction with Suspension and Fixed Arms. A monitor is securely cradled within the Caddy. Choose a Caddy appropriate to your monitor’s size. The Caddy’s telescoping frame further adjusts to an individual monitor’s height. Part Description Height Monitor Monitor Weight Number Adjustment Depth* Width* Capacity* 40-002-000 Type 2 12"–15-1/2" 16-1/2" — 40 lbs Monitor Caddy (305–394 mm) (419 mm) (18.2 kg) 40-004-000 Type 3 13-1/2"–18-1/2"
Inhaltszusammenfassung zur Seite Nr. 13
Mounting Systems Command Posts The Command Post uses little or no floor space. Attach to the floor, suspend from the ceiling, or clamp to a machine or workbench (choose appropriate mounting hardware from the table below). It provides one standard interface that will mount multiple components. Choose a length of post that accommodates your monitor requirements and the size/number of components you wish to mount. Brackets are required to mount arms and peripherals to post unless noted otherwise (
Inhaltszusammenfassung zur Seite Nr. 14
Mounting Systems Bases for Select the appropriate Base for your post when mounting to floor or ceiling. Command Posts Part Description Dimensions Compatible with Number H x W x D Post(s)… Base for Command Post 60-360-000 Base, for 7" x 17" x 17" 20-075-000, 20-076-000 3" x 3" Post (178 x 432 x 432 mm) 20-077-000 60-138-000 Base, for 8" x 18" x 18" 20-078-000 4" x 4" Post (203 x 457 x 457 mm) 90-018 Hardware Kit for Base 3/8" dia. x 3-3/4" long (4) concrete stud anchors (9.5 x 95 mm) Note: Mount
Inhaltszusammenfassung zur Seite Nr. 15
Mounting Systems Second Component Mount a second component to the 3" x 3" or 4" x 4" Post Brackets by ordering one of these Fastener Kits for Fastener Kits. Command Posts Part Description Number Bracket for Arm to Post 97-097-099 97-095-099 Fastener Kit, Suspension, Lift or Fixed Arm 97-096-099 Fastener Kit, Extender Arm 97-097-099 Fastener Kit, CPU Holder Note: When mounting Extender Arm or multiple monitor arms to Command Post, use 4" x 4" Post only. Suspension Arm CPU Holder Example of multi
Inhaltszusammenfassung zur Seite Nr. 16
Mounting Systems Wall Tracks The Wall Track mounting system is a flexible, low-cost mounting method that occupies zero floor space. This system attaches to most vertical surfaces – such as walls, pillars, and machines – and provides one standard interface that will mount multiple Ergotron components anywhere along its length. Choose a length of Wall Track that will accommodate the size and number of components you wish to mount. Part Description Dimensions Number H x W 31-016-182 10" Wall Track
Inhaltszusammenfassung zur Seite Nr. 17
Mounting Systems Wall Bracket The Wall Bracket allows mounting of any monitor arm directly to a wall or solid structure, like a machine or pillar. This economical solution adds the extra support you need. Part Description Dimensions Arm Fasteners Number W x H 60-152-000 Wall Mounting Bracket 6-5/8" x 8" (6) 3/8"-16 x 3/4" with arm fasteners (168 x 203 mm) carriage bolt Note: Fasteners that attach Wall Bracket to wall are not supplied by Ergotron. Wall Bracket Caution: Surface construction varie
Inhaltszusammenfassung zur Seite Nr. 18
Keyboard Solutions Keyboard Holders, Wire Keyboard Holders: Store your keyboard out of the way, then pull it out when needed. Tilt up or Trays & Arms down in 15˚ increments. Keyboard Holders mount under Caddies and Platforms. Part Description Dimensions Weight 75-052-009 Number W x D x H Capacity 75-052-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 4-1/2" 15 lbs 2" drop, pull-out (327 x 597 x 114 mm) (6.8 kg) 75-053-009 Wire Keyboard Holder 12-7/8" x 23-1/2" x 6-1/2" 15 lbs 4" drop, pull-out (32
Inhaltszusammenfassung zur Seite Nr. 19
Peripherals and Accessories CPU Holders, Shelves CPU Holders: Mount CPUs in a vertical, tower position. Each holder’s width is adjustable. Three sizes and Cabinets are available to accommodate equipment 1-3/8" to 10-3/4" wide. Mount to Command Post, Wall Track, or directly to a vertical surface. Part Description Dimensions Weight 80-063-000 Number H x W x D (D = Adjustment Range) Capacity Small CPU Holder 80-063-000 CPU Holder, 6" x 10" x 1-3/8–3-3/4" 50 lbs Small (152 x 254 x 35–95 mm) (22.7 kg
Inhaltszusammenfassung zur Seite Nr. 20
Peripherals and Accessories Peripheral Table The Peripheral Table provides a solid, laminated surface for writing or holding equipment. Comes in Grey Millstone finish. Configure it with either a Fixed or Fold-Away Underbracing. Mount to Command Post, Wall Track, or directly to a vertical surface. Part Description Dimensions Number W x D x H Fold-Away Underbracing and Peripheral 55-035-999 Peripheral Table, 20" x 18" x 3/4" Table shown in up position (above) and laminated (508 x 457 x 19 mm) down
