Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Color LCD Monitor
Inhaltszusammenfassung zur Seite Nr. 2
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2002 by EIZO NANAO CORPORATION.
Inhaltszusammenfassung zur Seite Nr. 3
English TABLE OF CONTENTS PRECAUTIONS ...................................................................................4 1. INTRODUCTION .....................................................................................9 1-1. Features....................................................................................................... 9 1-2. Package Contents ........................................................................................ 9 1-3. Controls & Connectors ........
Inhaltszusammenfassung zur Seite Nr. 4
English PRECAUTIONS IMPORTANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] WARNING If the unit begins to emit smo
Inhaltszusammenfassung zur Seite Nr. 5
English WARNING Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Place the unit on a strong, stable surface. A unit placed on an inadequate surface m
Inhaltszusammenfassung zur Seite Nr. 6
English WARNING The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. Use the correct voltage. * Do not overload your power circuit, as this may result in fire or electric shock. * The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or other damage. * Do not overload your power circuit, as this may result in fire
Inhaltszusammenfassung zur Seite Nr. 7
English CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury or equipment damage. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. OK Do not block the ventilation slots on the cabinet. * Do not place book
Inhaltszusammenfassung zur Seite Nr. 8
English LCD Panel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this will result in damage to the screen. There will be prints left on the screen if the
Inhaltszusammenfassung zur Seite Nr. 9
English 1. INTRODUCTION Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • Dual inputs compliant • DVI (p. 44) Digital input (TMDS (p. 45)) compliant • Horizontal scanning frequency: 27 - 82 kHz (Digital input: 27 - 64 kHz) Vertical scanning frequency: 50 - 85 Hz Vertical (1280 x 1024 ~ 75 Hz) Vertical (Digital) of 60 Hz (VGA text: 70 Hz) Resolution: 1280 x 1024 • Smoothing function incorporated for the adjustment of an enlarged image. (p.26) • Fine c
Inhaltszusammenfassung zur Seite Nr. 10
English 1-3. Controls & Connectors Front (2) (1) Fine Contrast Menu Control Panel SIGNAL AUTO ENTER 1 - 2 (3) (4) (5) (6) (7) (8) (1) ScreenManager Main Menu (2) Main Power Switch (3) Input signal selection button (4) Auto Adjustment Button (5) Enter Button *1 (6) Control Buttons (7) Power Button *2 (8) Power Indicator Green Operation Yellow Power saving Flashing yellow Power save mode Digital only (2 times for each) Flashing yellow Power is off (Main power is on) slow
Inhaltszusammenfassung zur Seite Nr. 11
English Rear (9) (11) (10) Bottom (12) (13)(14) (15) * 3 (9) Height Adjustable Stand (Detachable) (10) Power Terminal Covers for the Optional peripheral *4 (11) Security Lock Slot (12) DVI-I Input Connector x 2 (SIGNAL 1, SIGNAL 2) (13) USB Port (4 Downstream) (14) USB Port (1 Upstream) (15) Power Connector *3 The LCD monitor has the capability of the Portrait/Landscape display. (The panel pivots in the clockwise direction 90°.) For the Portrait display, use the software f
Inhaltszusammenfassung zur Seite Nr. 12
English 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution p. 45) and frequency) in accordance with the charts below. NOTE • When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Remarks 640 × 480 ~ 85 Hz VGA, VESA 720 × 400 70 Hz VGA TEXT 800
Inhaltszusammenfassung zur Seite Nr. 13
English 2-2. Connecting the signal cable NOTE • Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Power Cord Analog Input Signal Cable Connector PC Signal Cable (FD-C16 Video Output Standard graphics card enclosed) Connector D-Sub mini Macintosh G3 (Blue
Inhaltszusammenfassung zur Seite Nr. 14
English 3. Lead the power cord and signal cable into the cable holder at rear of the monitor. NOTE • The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/Landscape display. Cable Holder 4. Plug the other end of the power cord into a power outlet. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in
Inhaltszusammenfassung zur Seite Nr. 15
English 2-3. Connecting two PCs to the monitor Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the back of the monitor. Connecting Examples Signal 1 Signal 2 PC 1 PC 2 (Ex.1) Analog D-Sub Signal Cable Signal Cable DVI Digital mini 15 (FD-C16 enclosed) (FD-C04 enclosed) pin (Ex.2) Analog D-Sub Signal Cable Signal Cable D-Sub Analog mini 15 mini (FD-C16 enclosed) (FD-C16 optional) pin 15 pin (Ex.3) Digital DVI Signal Cable
Inhaltszusammenfassung zur Seite Nr. 16
English Selecting the active input The Input signal selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen. Input signal selection button SIGNAL AUTO ENTER 1 - 2 The priority input signal This function is u
Inhaltszusammenfassung zur Seite Nr. 17
English 3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a fine contrast mode easily. [Ex.] Custom Main Menu Control Buttons Left, Down, Up, Right SIGNAL AUTO ENTER 1 - 2 Auto Adjustment Fine Contrast Menu Enter button button NOTE • Main Menu and Fine Contrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the
Inhaltszusammenfassung zur Seite Nr. 18
English 3-2. ScreenManager Adjustments and Settings. The following table shows all the ScreenManager’s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only. Main menu Sub menu Reference * Screen Clock 4-1. Screen Adjustment (p.22) * Phase Position Resolution * Range Adjustment Smoothing * Signal Filter *1 Color(Custom) Brightness 4-3. Color Adjustment (p.28) Temperature Gamma Saturation Hue Ga
Inhaltszusammenfassung zur Seite Nr. 19
English 3-3. Fine Contrast This function allows you to select the best suited mode for screen display. To select the Mode Directly pressing the left or right button allows you to select the best suited mode for screen display from 6 fine contrast modes; Text, Picture, Movie, sRGB, Custom and External. Color settings each mode can be adjusted by using the menu of the ScreenManager. NOTE • When the main menu of ScreenManager is displayed on the screen, the Fine Contrast Menu c
Inhaltszusammenfassung zur Seite Nr. 20
English 3-4. Useful Functions Adjustment Lock Use the “Adjustment Lock” function to prevent any accidental changes. Locked function • Auto adjustment button adjustments and settings in the ScreenManager. • Auto Adjustment Button Unlocked function • Selecting of the Fine Contrast mode by the control buttons. • Input signal selection button • To lock Switch off the monitor’s power by the power button on the front panel. Press on the Auto adjustment button while switching on the mon
