Inhaltszusammenfassung zur Seite Nr. 1
Cover
Important
Please read PRECAUTIONS, this User’s Manual and Setup Manual
(separate volume) carefully to familiarize yourself with safe and effective
usage.
• Please read the Setup Manual (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.radiforce.com
Inhaltszusammenfassung zur Seite Nr. 2
Product specification may vary with sales areas. Confirm the specification in the manual written in language of the region of purchase. • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement. • Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided. • This is a monitor intended for use in a medical image syste
Inhaltszusammenfassung zur Seite Nr. 3
Notice for this monitor This product is suited to display medical images of such modalities as MRI and CT. It does not support the display of mammography images for diagnosis. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. The specifications noted i
Inhaltszusammenfassung zur Seite Nr. 4
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. LCD Panel ● • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a dry cloth for better finish
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS Cover ............................................................. 1 Chapter Setting Monitor ................................ 1 Notice for this monitor ............................................. -1. Enabling/Disabling Mode Selection [Mode Preset] .................................................. 1 CONTENTS ............................................................. - . Locking Switches [Key Lock] ....................... 1 Chapter 1 Introduction .................
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • Resolution: 2M pixels (Portrait : 1200 × 1600 dots (H × V)) • Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals) • 3 signal input terminals (DVI-I x 2, DisplayPort x 1) • CAL Switch function for selecting an optimal calibration mode “2-3. To select the display mode (CAL Switch)” (page 15) • DICOM mode (CAL Switch function) (page 38) • The quality control software
Inhaltszusammenfassung zur Seite Nr. 7
1- . Switches and Indicators Adjustment menu Switch 1 2 3 4 5 6 7 1. switch 5. switch 2. switch 6. switch 3. switch 7. Power Indicator 4. switch Indicator status Operation status Green The screen is displayed Orange Power saving Off Main Power Switch / Power Switch off 1- . Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. Disk contents and software overview ● The disk inclu
Inhaltszusammenfassung zur Seite Nr. 8
1- . Basic Operation and Functions Basic operation of Adjustment menu 1 Displaying Adjustment Menu Press . The adjustment menu appears. Menu title Current mode Item Settings Menu 2 Adjusting/Setting 1. Choose a menu to adjust/set with , and press . 2. Choose an item to adjust/set with , and press . 3. Adjust/set the selected item with , and press . 3 Exiting Press a few times. The adjustment menu finishes. Chapter 1 Introduction 8
Inhaltszusammenfassung zur Seite Nr. 9
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Item Adjusting/Setting Color “2-3. Color Adjustment” (page 15) Brightness Contrast Temperature Gamma Advanced Hue Settings Saturation Outline Enhancer Gain 6 Colors “3-7. Restoring the Default Setting” Color Reset (page 24) Screen “2-4. Displaying Lower Resolutions” Screen Size (page 20) “3-4. Setting Orientation” (page 22) Image Rotaion “2-2. Displaying Screen Correctly” Analog Auto A
Inhaltszusammenfassung zur Seite Nr. 10
Chapter Adjusting Screen -1. Setting Screen Resolution Compatible Resolutions/Frequencies For details on compatible resolutions, refer to “Compatible Resolutions/Frequencies” in the Setup Manual. Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. Windows Vista ● 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Personal
Inhaltszusammenfassung zur Seite Nr. 11
- . Displaying Screen Correctly Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-3 Color Adjustment” (page 15) and subsequent pages. Analog Input Attention • Wait 30 minutes or more from monitor power on before starting adjustments. (Allow the monitor to warm up for at least 30 minutes before making adjustments.) The monitor screen adjustment is used to suppress flickering of the
Inhaltszusammenfassung zur Seite Nr. 12
2 Prepare the display pattern for the analog display adjustment. Download the “Screen adjustment pattern files” from our site: http://www.radiforce.com NOTE • For details and instructions on opening the “Screen adjustment pattern files”, refer to the “Readme.txt” file. 3 Perform the auto adjustment again with the analog screen adjustment pattern displayed. T o a d j u s t fl i c k e r i n g , s c r e e n p o s i t i o n , a n d s c r e e n s i z e a u t o m a t i c a l l y [ A u t o A d j u
Inhaltszusammenfassung zur Seite Nr. 13
4 Perform advanced adjustments for the following using the menu of the . Adjust the clock, phase and position, in this order. To eliminate vertical bars [Clock] ● Procedure 1. Choose from the menu, and press . 2. Adjust the clock with or . Press slowly so as not to miss the adjustment point. 3. Press to exit the adjustment. When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
Inhaltszusammenfassung zur Seite Nr. 14
5 Adjust the color gradation. To adjust color gradation automatically [Range Adjustment] ● Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the screen adjustment pattern files. 2. Choose from the menu, and press . The color gradation is adjusted automatically. When the auto adjustment is completed, a message appears. Select “OK” to confirm the new sett
Inhaltszusammenfassung zur Seite Nr. 15
- . Color Adjustment To select the display mode (CAL Switch) ● CAL Switch allows you to select easily the adequate mode suitable for the monitor’s application. CAL Switch mode Mode Purpose 1-DICOM Available to display in DICOM mode. 2-Custom Available for the color settings according to your preference. 3-CAL Displays the screen adjusted by calibration software. 4-Text Suitable for displaying texts for word processing or spreadsheets. The mode menu appears. Procedure 1. Press . Mode menu ap
Inhaltszusammenfassung zur Seite Nr. 16
Adjustment items in each mode ● According to the mode selected, the adjustable function differs. (You can not select any function unavailable for adjustment or setting.) The adjustments or settings made for each mode are applied to all input signals. For the adjustment method of each function, refer to subsequent pages. √: Adjustment available ―: Invalid for adjustment CAL Switch mode Icon Function 1-DICOM 2-Custom* 3-CAL* 4-Text* Brightness √ √ √ √ Contrast ― √ ― √ Temperature ― √ ― √ Gamm
Inhaltszusammenfassung zur Seite Nr. 17
To adjust the brightness [Brightness] ● The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . 3. Adjust the brightness with or . 4. Press to exit the adjustment. NOTE • You can also adjust the brightness using and . • When your feel the image is bright even if the brightness is
Inhaltszusammenfassung zur Seite Nr. 18
To adjust the gamma value [Gamma] ● The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of the monitor is called as “Gamma correction”. Adjustable range: 1.8-2.6 Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . 3. Adjust the gamma value with or .
Inhaltszusammenfassung zur Seite Nr. 19
To enhance the outline of the image [Outline Enhancer] ● OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels composing the images. This may improve the texture of the material and its feel of the images. On the contrary, it also functions to reproduce the images smoothly by gradating its outline. Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . 3. Choos
Inhaltszusammenfassung zur Seite Nr. 20
- . Displaying Lower Resolutions T o c h a n g e s c r e e n s i z e [Sc r e e n S i z e ] ● You can change the screen size by using from menu. Menu Function Full Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Enlarged Displays an image in full screen. In some cases, a blank horizontal or vertical border appears to equalize the vertical rate and the horizontal rate. Normal Displays
