Inhaltszusammenfassung zur Seite Nr. 1
PRECAUTIONS
CONTENTS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer Settings
2-5 Power Indicator/EIZO Logo Display Settings
2-6 Locking Buttons
Important
2-7 Setting Adjustment Menu Position
2-8 Viewing Information/Setting Language
Please read this User’s Manual and Setup
2-9 Setting BrightRegulator
Manual (separate volume) caref
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING CAUTION Failure to abide by the information in a WARNING Failure to abide by the information in a CAUTION may result in serious injury and can be life threatening. may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates a mandatory action that must be followed. Copyright© 2007 EIZO NANAO CORPORATION All rights reserve
Inhaltszusammenfassung zur Seite Nr. 3
PRECAUTIONS IMPORTANT • This product has been adjusted specifi cally for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specifi ed in the specifi cations. • To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. [Location of Caution Statement] WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disco
Inhaltszusammenfassung zur Seite Nr. 4
WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fi re or electric shock. Set the unit in an appropriate location. Not doing so may result in fi re, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the transportatio
Inhaltszusammenfassung zur Seite Nr. 5
WARNING When attaching an arm stand, please refer to the user’s manual of the arm stand and install the unit securely. Not doing so may cause the unit to become unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fi re or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a damaged LCD p
Inhaltszusammenfassung zur Seite Nr. 6
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit fi rmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots. • Do not install the
Inhaltszusammenfassung zur Seite Nr. 7
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels: 99.9994% or higher. The backlight of the LCD panel has a fi xed life span. When the screen becomes dark or begins to fl icker, p
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS PRECAUTIONS ...................................................... 1 2-8 Viewing Information/Setting Language ....... 18 ● To check settings, usage time, etc. LCD Panel ................................................................... 5 [Information] ..................................................... 18 ● To set a language to be displayed To use the monitor comfortably ............................... 5 [Language] ....................................................... 18 2-9 Set
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1 Features and Overview Thank you very much for choosing an EIZO color LCD monitor. 1-1 Features • Dual-input compliant (DVI-D and D-sub mini 15-pin connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: Analog: 24.8 - 60 kHz Digital: 31 - 49 kHz • Vertical scan frequency: Analog: 55 - 75 Hz Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) NOTE • The stand of the unit can be replaced • Resolution: 1024 dots × 768 lines with an arm or another stand. (Refer • Stereo
Inhaltszusammenfassung zur Seite Nr. 10
1-3 Functions and Basic Operation To adjust the screen and color Main menu (Refer to page 9 for operation) (for analog signal input only) Page 11 Screen Adjustment 1 (Automatic Adjustment) ● To adjust flickering and position [Screen] ……………………………… see page 11 • The Adjustment menu and the FineContrast mode ● To adjust color gradation automatically cannot be displayed at the same time. [Range] ……………………………… see page 13 Page 11 FineContrast mode Screen Adjustment 2 (Advanced Adjustment)
Inhaltszusammenfassung zur Seite Nr. 11
To make useful settings/adjustments Adjustment menu (Refer to below for operation) Page 18 Information ● To check settings, usage time, etc. [Information] Page 18 Language Setting Input Signal Selection ● To set a language to be displayed [Language] ● To set input signal selection [Input Signal] ………………………… see page 20 Off Timer Setting ● To set monitor power-off time [Off Timer] …………………………… see page 16 Setting Adjustment Menu Position ● To adjust the menu position [Menu Position] ……………………
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes color profiles, application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” on the disk for software startup procedures or file access procedures. Item Overview For Windows For Macintosh A “Readme.
Inhaltszusammenfassung zur Seite Nr. 13
2-2 Screen Adjustment Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. Attention Analog Input • Wait 30 minutes or more from The monitor screen adjustment is used to suppress fl ickering of the screen or monitor power on before starting adjust screen position and screen size correctly according to the PC to be used. adjustments. To use the monitor comfortably, adjust the screen when the monitor is set up for NOTE the fi rst
Inhaltszusammenfassung zur Seite Nr. 14
NOTE Perform advanced adjustments for the following using the 3 • Press the control button slowly so as not to miss the adjustment point. menu of the Adjustment menu. • When blurring, fl ickering or bars ● To eliminate vertical bars [Clock] appear on the screen after adjustment, proceed to [Phase] to remove (1) Choose from the menu, and press . fl ickering or blurring. The menu appears. (2) Adjust the clock with or , and press . Attention The adjustment is
Inhaltszusammenfassung zur Seite Nr. 15
Adjust the signal output range. 4 ● To adjust color gradation automatically [Range] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose from the menu, and press . (2) Select “Execute” with or , and press . (3) Color gradation is adjusted correctly by the auto-adjustment function. The output range is adjusted automatically. When using the “Screen Adjustment Program”, the program is fi nished. Change the smoothing setti
Inhaltszusammenfassung zur Seite Nr. 16
2-3 Color Adjustment Simple Adjustment [FineContrast Mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast mode An appropriate display mode is selectable out of three modes. Mode Purpose Custom Available for making desired setting. Suitable for color matching with sRGB compatible sRGB peripherals. Suitable for displaying texts for word processing or Text spreadsheets. FineContrast mode name Example) Custom Displays current mode. NOTE ●
Inhaltszusammenfassung zur Seite Nr. 17
Attention Advanced Adjustments [Adjustment Menu] • Perform [Range Adjustment] before Independent setting and saving of color adjustment are available for each starting color adjustment for analog input signals. FineContrast mode. Refer to “To adjust color gradation automatically” on page 13. ● To select an appropriate mode for images • Wait 30 minutes or more from : Adjustment available −: Invalid for adjustment ✓ monitor power on before starting the color adjustment. FineContrast mode
Inhaltszusammenfassung zur Seite Nr. 18
2-4 Off Timer Settings ● To set monitor power-off time [Off Timer] Attention This function allows the monitor to automatically turn off after a specifi ed time • The Off Timer functions even in the has passed. This function serves to reduce afterimages caused when the monitor power saving mode, but the advance screen is left on for a long time period without use. Use this function when an notice is disabled. The monitor power image is displayed throughout the day. is turned off without adv
Inhaltszusammenfassung zur Seite Nr. 19
2-5 Power Indicator/EIZO Logo Display Settings NOTE ● To turn off the Power indicator while a screen is displayed • The Power indicator lights up at [Power Indicator] power on with the default setting. This function enables to turn off the Power indicator (blue) while a screen is displayed. (1) Choose from the Adjustment menu, and press . (2) Choose from the menu, and press . The menu appears. (3) Select “Disable” with or , and press .
Inhaltszusammenfassung zur Seite Nr. 20
2-7 Setting Adjustment Menu Position ● To adjust the menu position [Menu Position] Adjust the menu position using the following procedure. NOTE • Five positions (center/ upper right/ (1) Choose from the Adjustment menu, and press . lower right/ upper left/ lower left) can (2) Choose
