Inhaltszusammenfassung zur Seite Nr. 1
SAFETY SYMBOLS .................................................... 2
PRECAUTIONS ...................................................... 3
Important
1. Introduction .............................................................. 7
1-1. Features ..............................................................7
Please read this User’s Manual carefully to
1-2. Buttons and Indicators ........................................8
familiarize yourself with safe and effective
1-3. Utility Disk .............
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or propertyor product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No p
Inhaltszusammenfassung zur Seite Nr. 3
PRECAUTIONS PRECAUTIONS IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. This product is designed for use in Japan only and cannot be used in any other countries. To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below).
Inhaltszusammenfassung zur Seite Nr. 4
PRECAUTIONS WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in the tr
Inhaltszusammenfassung zur Seite Nr. 5
PRECAUTIONS WARNING When attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely. Not doing so may cause the unit to come unattached, which may result in injury or equipment damage. When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely. Do not touch a dama
Inhaltszusammenfassung zur Seite Nr. 6
PRECAUTIONS LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing pixels or lit pixels does not indicate damage to the LCD monitor. Percentage of effective pixels : 99.9994% or higher. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins t
Inhaltszusammenfassung zur Seite Nr. 7
1. Introduction 1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 24" wide format LCD • Applicable to HDCP • Dual inputs compliant (DVI-I x 2) • DVI Digital input (TMDS ) compliant • [Horizontal scanning frequency] Analog: 24 - 94kHz Digital: 26 - 78 kHz [Vertical scanning frequency] Analog: 47.5 - 86Hz (1600x1200: 47.5 - 76Hz / 1920x1200: 47.5 - 61Hz) Digital: 47.5 - 63Hz (VGA text: 69 - 71Hz) [Resolution] 1920 dots x 1200 lines • Frame Synchronous mo
Inhaltszusammenfassung zur Seite Nr. 8
1. Introduction 1-2. Buttons and Indicators Adjustment menu ® (ScreenManager *) FineContrast menu Control Panel 1 � 3 4 5 6 7 8 � 1. Sensor (BrightRegulator) 2. Adjustment Lock button 3. Input Signal Selection button 4. Mode button 5. Auto Adjustment button 6. Enter button 7. Control buttons (Left, Down, Up, Right) 8. Power button 9. Power indicator Indicator status Operation status Blue The screen is displayed Orange Power saving Off Power off ® *ScreenManager is an EIZO's nickname of
Inhaltszusammenfassung zur Seite Nr. 9
1. Introduction 1-3. Utility Disk An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to "Readme.txt” or the "Readme" file on the disk for software startup procedures or file access procedures. Item Overview For Windows For Macintosh
Inhaltszusammenfassung zur Seite Nr. 10
2. Installation 2. Installation 2-1. Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor. Connection examples SIGNAL1 SIGNAL2 PC 1 PC 2 Signal Cable Signal Cable D-Sub (FD-C39 enclosed) (FD-C16 enclosed) (Ex.1) Digital DVI mini 15 Analog pin Signal Cable Signal Cable D-Sub D-Sub (FD-C16 enclosed) (FD-C16 optional) (Ex.2) Analog mini 15 mini 15 Analog pin pin Selecting input signal Switch the input signal with . In
Inhaltszusammenfassung zur Seite Nr. 11
2. Installation Priority setting Performance 1 If signals from both inputs are present, the monitor gives preference to Signal 1 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 1 is changed even if active input was Signal 2. 2 If signals from both inputs are present, the monitor gives preference to Signal 2 in the following cases. • When the power of the monitor is turned ON. • When the signal input to Signal 2 is changed even if active
Inhaltszusammenfassung zur Seite Nr. 12
2. Installation 2-2. Making Use of USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment • PC equipped with USB ports or another USB hub connected to the USB compliant PC • Windows 2000/XP/Vista // Mac OS 9.2.2 or later • USB Cable (MD-C93, enclosed) NOTE • The USB hub function may not
Inhaltszusammenfassung zur Seite Nr. 13
3. Screen Adjustment and Settings 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ® Adjustment menu (ScreenManagaer ) Power button Enter button FineContrast Menu Mode button Control buttons (Left, Down, Up, Right) NOTE •Main Menu and FineContrast Menu cannot be activated at the same time. 1 Entering the ScreenManager Press once to display the main menu of the
Inhaltszusammenfassung zur Seite Nr. 14
3. Screen Adjustment and Settings Functions The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only and "**" indicates digital input only. Main menu Sub menu Reference Screen Clock 3-2. Screen Adjustment * Phase * Position * Resolution * Range Adjustment * Smoothing Signal Filter * 1 Brightness 3-3. Color Adjustment Color(Custom)* Temperature Gamma Saturation Hue Gain 6 Colors Reset PowerManager DVI DMPM ** 3-4. Power-save S
Inhaltszusammenfassung zur Seite Nr. 15
3. Screen Adjustment and Settings 3-2. Screen Adjustment NOTE • Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. The monitor displays the digital input image correctly based on its pre-setting data. Analog Input Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenM
Inhaltszusammenfassung zur Seite Nr. 16
3. Screen Adjustment and Settings Adjust by using menu in the ScreenManager 3 (1)Vertical bars appear on the screen Use the adjustment. Select the and eliminate the vertical bars by using and of the Control buttons. Do not continuously press the Control buttons, as the adjustment value will change quickly and make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur or bars appear, proceed to adjustment as follows.
Inhaltszusammenfassung zur Seite Nr. 17
3. Screen Adjustment and Settings (4)Screen image is smaller or larger than the actual screen images. Use the adjustment. Adjustment is needed when the input signal resolution and the resolution now being displayed are different. Select and confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using and and adjust the horizontal resolution using and . Smaller than the actual screen i
Inhaltszusammenfassung zur Seite Nr. 18
3. Screen Adjustment and Settings 3-3. Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. To select FineContrast mode Directly pressing allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU and CAL. Color settings each mode can be adjusted by using the menu of the ScreenManager. ->Custom -> sRGB -> EMU -> CAL Tips • When the main menu of Screen
Inhaltszusammenfassung zur Seite Nr. 19
3. Screen Adjustment and Settings Advanced Adjustments[Adjustment menu] Color settings of each FineContrast mode can be adjusted and saved by using the menu of the Adjustment menu. In the analog input, perform the "Range Adjustment" before making the color adjustments. During color adjustments, the FineContrast mode cannot be changed. Select the mode in advance by using Adjustment Items The adjustable items and displayed icons on the menu depend on the selected FineContrast
Inhaltszusammenfassung zur Seite Nr. 20
3. Screen Adjustment and Settings Adjustment Contents Menu Function Descriptions Adjustable range Brightness To set the brightness of the screen 0~100% Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature 4000K~10000K in 500 K increments (including 9300 K) Tips • The values shown in the Kelvin are available only as a reference tool. • While color temperature is adjusted, is adjusted automatically according to the color temperature.
