Inhaltszusammenfassung zur Seite Nr. 1
English
User's Manual
®
T960
Color Display Monitor
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS PRECAUTIONS 4 INTRODUCTION 9 About This Manual ···························································· 9 Features ············································································· 9 Package Contents: ···························································· 9 Controls & Connectors ··················································· 10 Front ···················································································· 10 Rear ···································
Inhaltszusammenfassung zur Seite Nr. 3
2-5 Other Settings - Others Menu - ······························· 35 E Degaussing ········································································· 35 Input Priority ········································································ 35 Beep ···················································································· 36 Menu Position, Menu Contrast············································ 37 Signal Filter 1 ·······························································
Inhaltszusammenfassung zur Seite Nr. 4
PRECAUTIONS IMPORTANT! * This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry, picture positioning and color convergence and purity in the case of color monitors) is optimally adjusted to the earth's magnetic field of the specific destination. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. * The manufacturer is
Inhaltszusammenfassung zur Seite Nr. 5
WARNING E • If the monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning monitor can be dangerous. • Do not dismantle the cabinet or modify the monitor. Dismantling the cabinet or modifying the monitor may result in electric shock or burn. • Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots
Inhaltszusammenfassung zur Seite Nr. 6
• Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. In USA and Canada: * Rating: min. 125 V, 10 A * Length: max. 2.1 m * Type: SVT *Plug type:NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A In Europe: * Rating: min. 250 V, 10 A * Length: max. 2.1 m 2 * Type: H05VV-F 3G 1 mm Use a plug type approved by the country where you use Failure to do so may cause fire or electric shock. • Do not overload your power circuit, as this may resu
Inhaltszusammenfassung zur Seite Nr. 7
• Handle with care when carrying the monitor Note that the monitor is heavier at the front than at the rear. Do E not move it alone. Always work with another person. The screen is optically coated to reduce glare. Keep hard objects OK (such as buttons, tie pins, and other clothing accessories) away from the screen surface to prevent scratches. • Set the monitor in an appropriate location. *Do not install in a dusty or humid environment. *Do not place in a location where light shines directly
Inhaltszusammenfassung zur Seite Nr. 8
For users of the EIZO optional i·Sound™ sound unit and i·Station™ USB hub • When adjusting the viewing angle of the monitor, do not do so by handling the sound unit or USB hub. Adjusting the monitor in this way may break the unit or cause bodily injury. Others • Do not install the monitor within an area subject to strong magnetic fields (for example, in the vicinity of a speaker, except the optional i·Sound unit, or a high-voltage transformer). Magnetic fields can cause noise, image shaking,
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION About This Manual E This manual explains the precautions, features, specifications, and operation of your EIZO monitor. For convenience, a “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility. Features - Auto-sizing function. See page 13. - The adjustment of the color temperature between 4,000 K ~ 10,000 K in 500 K increments. See page 25. - PowerManager to reduce power consumption. See page 30. Pac
Inhaltszusammenfassung zur Seite Nr. 10
Controls & Connectors Front Power switch Switches the USB port with a drop monitor's power down access lid ON and OFF. (Downstream port x 1) See page 40 for further details Power indicator Indicates the power-on status, as follows: BNC/D-SUB selection Solid green: Power is ON button (normal mode) Selects BNC or D-Sub Flashing green: - PowerManager Mode 1 connector as active input. - Power is switching off within 15 minutes This feature is only used See Page 39. when two computers are Ye
Inhaltszusammenfassung zur Seite Nr. 11
Rear E USB Ports Power Connector (Upstream port x 1, Use the supplied power cord only. Downstream ports x 3) See page 40 for further D-Sub mini 15 pin input connector details. Maintenance port BNC input connector Allows EIZO optional utilities to be attached. Termination switch Allows multiple monitors to be chained together (Default termination is 75 Ω). INTRODUCTION 11
Inhaltszusammenfassung zur Seite Nr. 12
1 INSTALLATION 1-1 Connecting the Monitor to the PC 1) Be sure that the power switches of both the PC and the monitor are OFF. 2) Plug the signal cable into the connector at the rear of the monitor. • When connecting the signal cable or cable adapter, first check that the shape at the cable side matches the shape at the connecting side. After connecting, secure the connection with the screw-in fasteners. 3) Plug the other end of the cable into the video connector on the rear of the PC. Refer t
Inhaltszusammenfassung zur Seite Nr. 13
Macintosh E An optional Macintosh adapter must be connected to the PC before connecting the signal cable. Please consult EIZO dealer. D-Sub 15 pin D-Sub D-Sub mini 15 pin mini 15 pin Macintosh MD-C87 (enclosed) Macintosh Adapter (Optional) 4) Plug the power cord into the power connector at the rear of the monitor. Then plug the other end of the cord into a power outlet. WARNING • The equipment must be connected to a grounded main outlet. 5) Turn on the monitor power first, then switch on the
Inhaltszusammenfassung zur Seite Nr. 14
When the timing of the computer is same as the preset timing or has been recognized before, the following message will appear and remain on the screen for 5 seconds. While the message is on the screen, push the button again to automatically adjust the screen position. If not wishing to do adjust the screen, do not push the button again or press the control pad. The message will disappear. In general, press the AUTO-SIZING button whenever changing the graphics board or the resolution or when i
Inhaltszusammenfassung zur Seite Nr. 15
Maximum Vertical Refresh rate (Hz) Horizontal Scan E Frequency (kHz) 640x480 800x600 1024x768 1280x1024 1600x1200 1600x1280 30-115 160 160 142 107 92 86 Connecting two PCs to the monitor 1) Be sure that the monitor and the PC are both switched off before connecting them. 2) Connect one PC to the monitor’s D-Sub connector and another to the BNC connector securely. The BNC connection should be made with an EIZO BNC cable, available as an option. Contact EIZO dealers for information abo
Inhaltszusammenfassung zur Seite Nr. 16
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER 2-1 About ScreenManager How to Use the ScreenManager Entering the ScreenManager Press the ENTER key to display the ScreenManager Main menu. Main menu Making the adjustments and settings 1) Select the desired icon using the Arrow keys, and then press the ENTER key to display the Sub menu. Sub menu 2) Use the Control pad (the four Arrow keys and the ENTER key) to make the required adjustments and settings. Save & exit 1) To return to the previous me
Inhaltszusammenfassung zur Seite Nr. 17
ScreenManager Menus E ScreenManager consists of a main menu and six sub menus: “Screen”, “Color”, “PowerManager”, “Others”, “Information” and “Language.” Animated icons on each menu allow for easy adjustment. Main menu • The menu message for the ScreenManager can be displayed in six languages: English, German, French, Italian, Spanish and Swedish. First, select the preferred language through the “Language” menu. This will become the default language when you use the ScreenManager. Sub menus M
Inhaltszusammenfassung zur Seite Nr. 18
Menus Functions Reference Page 30 Power saving settings. Page 35 • Degaussing • Input-signal priority selection for two signal connections • Beep On/Off • ScreenManager menu position • ScreenManager menu contrast • Signal filter setting 1 • Signal filter setting 2 • Off Timer • Reset to defaults This menu shows the current ScreenManager settings. The menu contains four pages. Pressing the ENTER key displays the following information: • Page 1: Input port,
Inhaltszusammenfassung zur Seite Nr. 19
Shortcut Keys E Before entering the ScreenManager, brightness and contrast can be adjusted directly by moving the Control pad. To record the new setting and exit the ScreenManager, press the ENTER key. (The brightness and contrast functions are also available in the ScreenManager “Screen” menu.) See the diagram described below for adjustment directions. Brightness Up ENTER Contrast Contrast Down Up Brightness Down Adjustment Lock The ScreenManager operation can be disabled by holding down the
Inhaltszusammenfassung zur Seite Nr. 20
2-2 Imaging Adjustment - Screen Menu - All of the icons shown in the ScreenManager “Screen” menu are described below. • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Push the left Push the right Push the up Push the down arrow key arrow key arrow key arrow key Contrast/ Brightness contrast contrast brightness brightness down up up down • If you use the white text against a black background like DOS text, we reco mmend that you set the brightness to i
