Inhaltszusammenfassung zur Seite Nr. 1
Dell™ U2410 Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Solving Problems
Appendix
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, and cautions,
and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential dam
Inhaltszusammenfassung zur Seite Nr. 2
Back to Contents Page About Your Monitor Dell™ U2410 Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Universal Serial Bus (USB) Interface Card Reader Specifications Plug and Play Capability LCD monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell
Inhaltszusammenfassung zur Seite Nr. 3
l VGA Cable (attached to the monitor) l DVI Cable l DP Cable l USB up stream cable (enables the USB ports and card reader on the monitor) l Drivers and Documentation media l Quick Setup Guide l Safety Information Product Features The U2410 flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ 24-inch ( 518.4 mm x 324 mm) viewable area display measured diagonally. ■ 1920 x 1200 resolutio
Inhaltszusammenfassung zur Seite Nr. 4
Front View Control Panel Label Description Shortcut keys 1-3 *The default settings are Preset Modes Select, Brightness/Contrast Select and Input Source Select. 1 Preset Modes Select 2 Brightness/Contrast Select 3 Input Source Select 4 OSD Menu Select 5 Exit 6 Power Button (with power light indicator) NOTE:1~5 buttons are capacitive touch buttons, which are activated by placing your finger on the blue LED. Back View
Inhaltszusammenfassung zur Seite Nr. 5
Back View Back View with monitor stand Label Description/Use VESA Mounting Holes (100mm) 1 To mount the monitor. (Behind attached VESA Plate) To indicate the positions and types of 2 Connectors Label connectors. 3 Security Lock Slot To help secure your monitor. 4 Dell Soundbar Mounting Brackets To attach the optional Dell Soundbar. 5 Barcode Serial Number Label To contact Dell for technical support. 6 Regulatory
Inhaltszusammenfassung zur Seite Nr. 6
Right View Left View Label Description 1 Card Reader. See Card Reader Specifications for more information. 2 USB Down Stream Ports Bottom View Bottom View Label Description 1 AC Power Cord Connector 2 DC Power Connector for Dell™ Soundbar
Inhaltszusammenfassung zur Seite Nr. 7
3 DisplayPort Connector 4 HDMI Connector 5 DVI Connector-1 6 DVI Connector-2 7 VGA Connector 8 Composite Video Connector 9 Component Video Connectors 10 Audio Out (Support two channel output ) 11 USB Upstream Port 12 USB Downstream Port Stand Lock （Use a M3x14 threaded screw to 13 lock stand, screw not provided） Monitor Specifications The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor. Power
Inhaltszusammenfassung zur Seite Nr. 8
7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin Number 24-pin Side of the Connected Signal Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock
Inhaltszusammenfassung zur Seite Nr. 9
Luma composite chroma Component Video Connector Pin Number 3-pin Side of the Connected Signal Cable (Cable not included) 1 Y (Luminance signal) 2 Pb (Color differential signal) 3 Pr (Color differential signal) DisplayPort Connector Pin 20-pin Side of the Connected Signal Number Cable 1 ML0(p) 2 GND 3 ML0(n) 4 ML1(p) 5 GND 6 ML1(n) 7 ML2(p) 8 GND 9 ML2(n) 10 ML3(p) 11 GND 12 ML3(n) 13 GND 14 GND 15 AUX(p) 16 GND 17 AUX(n) 18 HPD 19 Re-PWR 20 PWR
Inhaltszusammenfassung zur Seite Nr. 10
HDMI Connector Pin 19-pin Side of the Connected Signal Number Cable 1 TMDS DATA 2+ 2 TMDS DATA 2 SHIELD 3 TMDS DATA 2- 4 TMDS DATA 1+ 5 TMDS DATA 1 SHIELD 6 TMDS DATA 1- 7 TMDS DATA 0+ 8 TMDS DATA 0 SHIELD 9 TMDS DATA 0- 10 TMDS CLOCK 11 TMDS CLOCK SHIELD 12 TMDS CLOCK- 13 Floating 14 Floating 15 DDC CLOCK (SDA) 16 DDC DATA (SDA) 17 GROUND 18 +5V POWER 19 HOT PLUG DETECT Flat Panel Specifications Screen type Active matrix - TFT LCD Panel type IPS Screen dimensions 24 inches (2
Inhaltszusammenfassung zur Seite Nr. 11
* U2410 Color Gamut (Typical) is based on CIE1976 (110%) and CIE1931 (102%) . Resolution Horizontal scan range 30 kHz to 81 kHz (automatic) Vertical scan range 56 Hz to 76 Hz Maximum resolution 1920 x 1200 at 60 Hz Video Supported Modes Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Supports HDCP) Video display capabilities (Composite playback) NTSC/PAL Video display capabilities (HDMI playback) 480i/480p/576i/576p/720p/1080i/1080p Video display cap
Inhaltszusammenfassung zur Seite Nr. 12
Connector type l VGA: Blue Connector l DVI-D: White Connector l DisplayPort: Black Connector l Composite l Component l HDMI Signal cable type l D-sub: Detachable, Analog, 15pin, shipped attached to the monitor l DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor l DisplayPort: Detachable, Digital, 20pin, shipped detached from the monitor l Composite l Component l HDMI NOTE: The composite, component and HDMI cables are not included with the monitor.
Inhaltszusammenfassung zur Seite Nr. 13
10% to 80% (noncondensing) Operating Storage: 5% to 90% (noncondensing) Non-Operating Shipping: 5% to 90%(noncondensing) Altitude 3,657.6 m (12,000 ft) max Operating 12,192 m (40,000 ft) max Non-Operating Thermal dissipation 375 BTU/hour (maximum) 195 BTU/hour (typical) Universal Serial Bus (USB) Interface This monitor supports High-Speed Certified USB 2.0 interface. Transfer speed Data Rate Power Consumption High speed 480 Mbps 2.5W (Max., each port) Full speed 12 Mbps 2.5
Inhaltszusammenfassung zur Seite Nr. 14
NOTE: The monitor's 2.0 USB interface functions only if the computer is USB 2.0 compatible. NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you switch the monitor off and then switch it on, the attached peripherals may take a few seconds to resume normal functionality. Card Reader Specifications Overview l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
Inhaltszusammenfassung zur Seite Nr. 15
Performance Transfer Speed Read: 480 Mb/s (max.) Write: 480 Mb/s (max.) Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the user can select different settings, but in most cases monitor installation is automatic.
Inhaltszusammenfassung zur Seite Nr. 16
Back to Contents Page Appendix Dell™ U2410 Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. For information on safety instructions, see the Safety Information. FCC Notice (U.S. Only) and Othe
Inhaltszusammenfassung zur Seite Nr. 17
Back to Contents Page Setting Up Your Monitor Dell™ U2410 Flat Panel Monitor If you have a Dell™ desktop or a Dell™ portable computer with internet access 1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card. 2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920 x 1200 again. NOTE: If you are unable to set the resolution to 1920 x 1200, please contact Dell™ to inquire about a Graphic
Inhaltszusammenfassung zur Seite Nr. 18
Back to Contents Page Setting Up Your Monitor Dell™ U2410 Flat Panel Monitor If you have non Dell™ desktop, portable computer, or graphic card 1. Right-click on the desktop and click Properties. 2. Select the Settings tab. 3. Select Advanced. 4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.). 5. Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.
Inhaltszusammenfassung zur Seite Nr. 19
Back to Contents Page Operating the Monitor Dell™ U2410 Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Maximum Resolution Using the Dell Soundbar (Optional) Using the Tilt, Swivel and Vertical Extension Rotating the monitor Adjusting the Rotation Display Settings of Your System Using the Front Panel Use the buttons on the front of the monitor to adjust the image settings. 1~5 are capacitive touch s
Inhaltszusammenfassung zur Seite Nr. 20
l HDMI input l Component video input l Composite video input Displays the source selection bar. Touch and buttons to move between the setting options and Touch to select the input source you want. If VGA or DVI-D or DisplayPort or HDMI input is selected and all VGA and DVI-D and DisplayPort and HDMI cables are not connected, a floating dialog box as shown below appears. or or or If either Composite, or Component input is selected and the cables are not connected or the
