Inhaltszusammenfassung zur Seite Nr. 1
b
Reference Guide
Compaq 5017 Flat Panel Monitor
Document Part Number: 266985-001
March 2002
Inhaltszusammenfassung zur Seite Nr. 2
© 2002 Compaq Computer Corporation. Compaq, the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. Microsoft, MS-DOS, Windows, Windows NT are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided “as is” without warran
Inhaltszusammenfassung zur Seite Nr. 3
1 Introduction Product Features Your flat panel monitor has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include the following: 15-inch (38.1 cm) viewable area display. 1024 x 768 resolution, plus full-screen support for lower resolutions. Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. Removable base for flexible mounting solutions. Plug and play capability if supported by your sys
Inhaltszusammenfassung zur Seite Nr. 4
Introduction ❏ EPA ENERGY STAR ❏ European Union CE Directives ❏ Swedish MPR II 1990 ❏ Swedish TCO '99 (select models) 1–2 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 5
2 Safety and Maintenance Guidelines Safety Guidelines Power Requirements Refer to the “Power Cord Set Requirements” section in “Agency Regulatory Notices,” for information on the correct power cord set for this device. Important Safety Information WARNING: To reduce the risk of electric shock or damage to your Å equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator
Inhaltszusammenfassung zur Seite Nr. 6
Safety and Maintenance Guidelines CAUTION: For the protection of your monitor, as well as your Ä computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacem
Inhaltszusammenfassung zur Seite Nr. 7
Safety and Maintenance Guidelines Turn your monitor off when not in use. You can substantially increase the life expectancy of your monitor by using a screen saver program and turning off monitor when not in use. Unplug your monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If the screen requires additional cleaning, use an antistatic screen cleaner. CAUTION: Do not use benzene, thinner, ammonia, or any other Ä
Inhaltszusammenfassung zur Seite Nr. 8
Safety and Maintenance Guidelines 2–4 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 9
3 Installation Monitor Setup Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the monitor signal cable to the video connector 1 on the rear panel of the monitor. 3. Place the monitor signal cable into the clip 2 on the back of the monitor. 4. Connect the monitor audio cable to the audio connector 3 on the rear panel of the monitor. (select models only, cable
Inhaltszusammenfassung zur Seite Nr. 10
Installation WARNING: To reduce the risk of electric shock or damage to your Å equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the monitor by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or t
Inhaltszusammenfassung zur Seite Nr. 11
Installation After you turn on the monitor, install the Compaq LCD Display ✎ Assistant utility included on the CD-ROM. Use the on-screen instructions to adjust the picture quality of your monitor. To install this utility, follow the instructions on the “Configuring Your Compaq LCD Monitor” card located in the Program License Agreement packet. Important: Always activate a screen saver program, the programmable sleep timer, the Compaq Display LiteSaver utility, or turn off the monitor when
Inhaltszusammenfassung zur Seite Nr. 12
Installation 3. Remove the base 2 from the monitor by pushing the base away from the monitor. 3–4 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 13
4 Operation Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an .INF file and an .ICM file. The .INF file defines monitor resources and provides specifications used by most operating systems to install support software for certain hardware devices. The .INF file ensures monitor compatibility and optimization with your computer’s graphics adapter. INF files are downloadable by clicking on: www.compaq.com/products/mo
Inhaltszusammenfassung zur Seite Nr. 14
Operation Front Panel Controls No. Icon Control Function 1 Headphone Jack Connects a headphone set to the monitor. 2 Select Launches on-screen displays, selects functions and adjustments, and exits menus and On-Screen Display. 3 Left Adjustment Moves backward through menu - options or decreases adjustment levels. 4–2 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 15
Operation No. Icon Control Function 4 + Right Adjustment Moves forward through menu options or increases adjustment levels. 5 Volume Control Controls the volume level of the monitor speakers. 6 Power LED Illuminates when the monitor is on. 7 Power switch Controls power to the monitor. The LED on the power button indicates the state of the monitor. *Sleep Timer enables you to set a time for the monitor to power on and power off at the same time every day. It eliminates the need to turn of
Inhaltszusammenfassung zur Seite Nr. 16
Operation 3. To move to a function, press the Right-Adjustment or Left-Adjustment button on the front panel of your monitor until the function is highlighted. 4. Press the Select button on the monitor choose the function. 5. The adjustment window displays. Press the Right-Adjustment or Left-Adjustment buttons to increase (Right) or decrease (Left) the level of adjustment. 6. Press Select to save the new adjustment. 7. To exit the On-Screen Display, select the Exit icon and press the Select
Inhaltszusammenfassung zur Seite Nr. 17
Operation Main Menu Advanced Menu Menu Level 3 6500 K Custom Color Custom Color Adjustment Cancel Save and Return Language Deutsch English Espanol Francais Italiano Nederlands Cancel Save and Return Management Power Saver On/Off Selection Power On Recall On/Off Selection Mode Display On/Off Selection Sleep Timer Timer Set Menu Basic Menu Cancel Save and Return OSD Control Horizontal OSD Adjustment Scale Position Vertical OSD Position Adjustment Scale OSD Timeout Adjustment Scale Cancel Referenc
Inhaltszusammenfassung zur Seite Nr. 18
Operation Main Menu Advanced Menu Menu Level 3 Save and Return Factory Reset Yes No Exit 4–6 Reference Guide
Inhaltszusammenfassung zur Seite Nr. 19
Operation How to Adjust Settings 1. To launch the on-screen display menu, complete the following: ❏ Basic Main Menu: To display the Basic Main Menu, press the Select button on the monitor front panel. Main Menu Brightness Contrast Auto Adjustment Advanced Menu Exit ❏ Advanced Main Menu: Select “Advanced Menu” from the Basic Main Menu to display the Advanced Main Menu shown below. Main Menu Brightness Contrast Image Control Color Language
Inhaltszusammenfassung zur Seite Nr. 20
Operation Note: After the Advanced Main Menu has been selected, it remains the default on-screen display each time the monitor is powered on until the Basic Main Menu option is selected again. 2. To select an item from the Basic Main Menu, scroll down and highlight an item by pressing the Left Adjustment (-) button located on the monitor front panel. To reverse or back up, press the Right Adjustment (+) button. 3. Highlight your choice and press the Select button again. 4. Adjust the Advan
