Inhaltszusammenfassung zur Seite Nr. 1
FP202W
20.1" Wide-Screen LCD Monitor
User’s Manual
Welcome
Inhaltszusammenfassung zur Seite Nr. 2
i Copyright Copyright © 2005 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. ii Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with res
Inhaltszusammenfassung zur Seite Nr. 3
i Table of Contents Getting started ...................................................................................................................... 4 Getting to know your monitor ............................................................................................ 5 Front View ...................................................................................................................5 Back View .................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
1 1 1 Getting started 1 When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement. BenQ LCD Monitor Quick Start Guide CD-ROM Power Cord Signal Cable: D-Sub Signal Cable: DVI-D Getting started 4
Inhaltszusammenfassung zur Seite Nr. 5
1 1 2 Getting to know your monitor 1 Front View Back View 1. DVI-D Connector 2. D-Sub Connector 3. Power AC input jack 5 Getting to know your monitor
Inhaltszusammenfassung zur Seite Nr. 6
1 1 3 How to install your monitor hardware 1 If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the moni
Inhaltszusammenfassung zur Seite Nr. 7
2. Connect the video cable. Connect one end of the DVI-D cable to the monitor DVI-D socket and the other and to the DVI-D port on your computer. The DVI-D format is used for direct digital connection between source video and digital LCD monitors or projectors. The digital video signals produce a superior quality picture than analog video signals. If you don’t have an appropriate DVI-D port on your computer, you can use the standard video D-Sub cable. Connect the plug of the D-Sub cable
Inhaltszusammenfassung zur Seite Nr. 8
4. Route the cables via the loose bracket. Release the cable retaining clip by squeezing the clip inwards as illustrated. Position the cables together and reinsert the clip over them to retain the cables neatly in place behind the monitor stand. 5. Connect-to and turn-on the power. Plug the other end of the power cord into a power point and turn it on. Turn on the monitor by pressing the power button located at the top of the row of buttons on the right edgeof the monitor. Turn on the comp
Inhaltszusammenfassung zur Seite Nr. 9
How to detach the stand base 1. Prepare the monitor and area. Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and contr
Inhaltszusammenfassung zur Seite Nr. 10
1 1 4 Getting the most from your BenQ monitor 1 How do I gain the most benefit from my new monitor? To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM. The circumstances under which you connect and install your BenQ LCD Monitor will determine which process you need to follow to successfully install the BenQ LCD Monitor driver software. These circumstances relate
Inhaltszusammenfassung zur Seite Nr. 11
How to install the monitor on a new computer This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver software on a new computer which has never had a monitor driver installed before. This instruction is only suitable for a computer which has never been used before, and for which the BenQ LCD Monitor is the first ever monitor to be connected to it. If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor connec
Inhaltszusammenfassung zur Seite Nr. 12
How to upgrade the monitor on an existing computer This instruction details the procedure for manually updating the existing monitor driver software on your Microsoft Windows computer. It is currently tested as compatible (and recommended only) for Windows 98, Windows ME, Windows 2000, and Windows XP Operating System (OS). The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows, however, as at the time of writing, BenQ has done no testing of this
Inhaltszusammenfassung zur Seite Nr. 13
How to install on Windows XP systems 1. Open Display Properties. The quickest shortcut to Display Properties is through the Windows desktop. Right-click the desktop and select Properties from the popup menu. Alternatively, the Windows menu to Display Properties is located in Control Panel. In Windows XP version, Control Panel is located directly under the main Start menu item. The menu options displayed will depend upon which type of view is selected for your system. • Under the Classic view
Inhaltszusammenfassung zur Seite Nr. 14
How to install on Windows 2000, ME, & 98 systems You do not need to follow this instruction if you are installing onto a computer which has a Windows XP (or later) version system. In that case, see the instructions at How to install on Windows XP systems. 1. Open Display Properties. The quickest shortcut to Display Properties is through the Windows desktop. Right-click the desktop and select Properties from the popup menu. Alternatively, the Windows menu to Display Properties is located in Co
Inhaltszusammenfassung zur Seite Nr. 15
How to complete the Windows Upgrade Device Driver Wizard 1. Load the BenQ LCD Monitor CD-ROM which came with your monitor. Insert the CD-ROM into a CD drive on the computer you attached the monitor to. The autorun User’s Guide language selection page will display in your web browser. You can select a language and view the online version of this manual from the next window. You could then print it out for reference if you wish to work off-line. When you’re ready, Cancel the browser as it is no
Inhaltszusammenfassung zur Seite Nr. 16
Should you wish to do so, this is where you can change the screen resolution (area and color). See How to adjust the screen resolution for details. 14. Click OK. This will close the Display Properties window, and if you made any changes to the screen resolution, Windows 2000 will prompt you for confirmation to effect the changes, and further confirmation to accept the changes. Click OK and Yes respectively. Alternatively, Windows ME or 98 will ask you if want to make the changes and reboot o
Inhaltszusammenfassung zur Seite Nr. 17
1 1 5 How to adjust the screen resolution 1 Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. The best possible picture for your FP202W is achieved with a resolution of 1680x1050. This is called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions are displayed on a full screen through an interpolation circuit. However flaws do occur with the interpolated resolution. To take full advantage of LCD tec
Inhaltszusammenfassung zur Seite Nr. 18
1 1 6 How to adjust the screen refresh rate 1 You don’t have to choose the highest possible refresh rate on an LCD display, because it is not technically possible for an LCD display to flicker. The best results are obtained by using the factory modes already set in your computer. There is a table with the factory modes in the specification section of this User’s Manual. You can choose 60 Hertz for the native resolution of 1680x1050. 1. Double click the Display icon in Control Panel. 2. Fro
Inhaltszusammenfassung zur Seite Nr. 19
1 1 7 How to set the picture optimization 1 The easiest way to obtain an optimal display is to use the i key function. Press the i key to optimize and adjust the screen settings automatically for you. Refer to How to adjust your monitor for button locations and functionality. If you wish to, you can always adjust the screen settings manually using the buttons on the monitor panel. To assist you in this endeavour, BenQ has provided a screen test image utility which you can use to check for
Inhaltszusammenfassung zur Seite Nr. 20
1 1 8 How to adjust your monitor 1 A Look at the Control Panel 1 2 3 4 5 6 7 8 There are 8 keys for user’s control including “Enter”, “ t” , “ u”, “Exit”, “Mode”, “Input” and “iKey” and a power switch. The following descriptions are the introduction of these keys & switch. 1. “Power”: Turn the power on or off. 2. “Enter” key: Activate OSD, enter sub menu, select items, confirm selection. 3. t (Up) key: For Up/Increase adjustment. The key is also the hot key for Brightness. 4. u (Down) key:
