Inhaltszusammenfassung zur Seite Nr. 1
LCD Monitor multi-language manual
I-See S series
A05-15AX-C03
A05-17AM-C04
A05-19AM-C05
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
INDEX ENGLISH IMPORTANT SAFETY INSTRUCTIONS................................................................................................1 1. Introduction..........................................................................................................................................2 1.1 General information ...................................................................................................................... 2 1.2 Features......................................
Inhaltszusammenfassung zur Seite Nr. 4
3.4 Safety mode................................................................................................................................ 11 3.5 Timing guide ............................................................................................................................... 11 3.6 Plug & Play ................................................................................................................................. 12 3.7 Power management...............................
Inhaltszusammenfassung zur Seite Nr. 5
3.3.1 Tasto Auto............................................................................................................................ 22 3.3.2 Tasti +/- ................................................................................................................................ 22 3.3.3 Tasto Enter........................................................................................................................... 22 3.3.4 Menù OSD.............................................
Inhaltszusammenfassung zur Seite Nr. 6
2.3 Auto test...................................................................................................................................... 37 2.4 Ajuster l’affichage........................................................................................................................ 37 3. Opérations.........................................................................................................................................37 3.1 Bouton Marche/Arrêt.....................
Inhaltszusammenfassung zur Seite Nr. 7
Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other names mentioned mat be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Important Note The antenna(s) used for this
Inhaltszusammenfassung zur Seite Nr. 8
ENGLISH ENGLISH IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions carefully 2. Save this manual for later use 3. Unplug the monitor from the power source when you clean the monitor. Don’t use liquid cleaners or aerosol cleaners. Use a cloth to clean it. If it doesn’t do, please use LCD screen cleaners 4. Don’t use attachment not recommended as they may cause hazards. 5. Please grasp the plug to unplug the connector from the wall outlet. Do not pull the power cord to unplug it. 6.
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH 17. Unplug this monitor from the outlet and refer servicing to qualified service personnel under the following conditions. a. The power cord is frayed or damaged. b. The monitor has been dropped or the cabinet has been damaged c. When the monitor displays a distinct change in performance, this indicates a need for service. 18. The power cord is the main device to disconnect the power. 19. Unplug the power cord when you do not use it for a long time. 20. Place the monitor in good
Inhaltszusammenfassung zur Seite Nr. 10
ENGLISH 1.3 Check List Check the list before operating this monitor, please make sure that all of the following items are included. 1. LCD monitor 2. Base + mounting screw 3. AC adapter 4. Power cord 5. Signal cable 6. Audio cable 7. User’s manual 8. Warranty certification If any of above listed items is missing, please contact your dealer for technical support or customer service. 2. Installation The following chapters explain how to install the base and connect the monitor to yo
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH 2.2 Install the monitor Make sure that the computer and monitor’s power are both turned off, before start installation. Please follow the steps to install your LCD monitor: 1. Signal cable connection: firstly lock the base and knighthead, then Plug one end of the signal cable into computer and lock the two bolts to ensure firmly grounding. Then plug the other into the monitor and lock the two bolts. 2. Power cord connection: connect the AC adapter and AC power source with power cor
Inhaltszusammenfassung zur Seite Nr. 12
ENGLISH 2.3 Self test pattern If there is no horizontal or vertical sync. signals, your monitor will display the self test pattern to indicate no signal input. After a few seconds, the monitor will enter into waiting and saving power mode. The LED will be red and flashing. Once the monitor receives the video signal, it will return to normal mode. 2.4 Adjust picture In order to obtain the best visual display, you must adjust it, please refer to chapter 3 “Operation of the moni
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH 3.3 OSD control keys 3.3.1 Auto key This key is used to complete auto adjusting function. 3.3.2 +/- key These two keys will complete the left (increase) or right (decrease) adjustment and choose the menu function. The contrast and the brightness can be set by +/- key directly. 3.3.3 Enter key Confirmation key, to display the OSD menu and complete the confirmation function. 3.3.4 OSD menu The function list of the menu: 1. A
Inhaltszusammenfassung zur Seite Nr. 14
ENGLISH 10. Volume 11. OSD menu display time 12. OSD horizontal/ vertical/position and transparency adjustment 13. Recall 14. Languages 15. Exit 16. Selected function name 17. Resolution 18. H-frequency 19. V-frequency 20. Progressive bar of adjustment 21. Percentage of adjustment 22. Title 3.3.5 Function table Display contents Function AUTO ADJUSTMENT Automatically adjust to obtain the best setting BRIGHTNESS Adjust the brightness CONTRAST Adjust the contrast H-PO
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH V-POSITION Move the screen upward or downward CLOCK Adjust the frequency of pixel PHASE Adjust the phase of pixel clock SHARPNESS Adjust the sharpness of the picture COLOR Adjust the colors of the picture 9300K COLOR TEMPERATURE Set 9300k color temperature 7800K COLOR TEMPERATURE Set 7800k color temperature 6500K COLOR TEMPERATURE Set 6500k color temperature USER MODE Set user mode AUTO COLOR BALANCE Auto color balance VOLUME Adjust the volume OSD DISPLA
Inhaltszusammenfassung zur Seite Nr. 16
ENGLISH OSD TRANSPARENCY OSD transparency setting RECALL Reset factory setting LANGUAGE Language selection EXIT Exit the menu 3.3.6 Special functions Auto Adjustment ( ) When you choose this function, the monitor will enter into automatical adjustment mode. After a few seconds, the monitor will be in the best visual display mode. Color adjustment ( ): when the function is selected, the monitor will come into the sub-menu, there are five functions that can be selecte
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH R/G/B adjustment ( ): When in “User’s mode”, the monitor will automatically enter into R/G/B adjustment mode, push the ENTER key ,the relative options will flash, then adjust it by pressing “+/-“ key. push ENTER again to exit. Language ( ). There are six language to select: ENG.: English FRE.: Frech DEU.: German ITA.: Italian ESP.: Spanish PYC.: Russian (TUR.:Turkish or POR.: Portuguese) Position of OSD menu ( ): When you select the item, you can adjust H-positi
Inhaltszusammenfassung zur Seite Nr. 18
ENGLISH Sharpness adjustment ( ): Adjust the sharpness of the picture on the screen. 3.4 Safety mode When the video signal exceeds the frequency range of the monitor , the monitor MCU will stop horizontal and vertical scanning in order to protect the monitor the following image will be displayed on the screen. After a few seconds, the monitor will enter turn-off mode. You must restart the computer and reset the frequency range. 3.5 Timing guide Models A05-17AM-C04 and A05-19
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH 8 70 75 56.5 9 1024 x 768 75 78.75 60 10 1152 x 864 75 108 67.5 11 1280 x 960 60 108 60 12 60 108 64 SXGA 1280 x 1024 13 75 135 80 Model A05-15AX-C03 Resolutio No. Mode V-Frequency (Hz) Pixel Clock (MHz) H-Frequency (KHz) n 1 720 x 400 70 28.322 31.468 VGA 2 640 x 480 60 25.175 31.469 3 SVGA 800 x 600 60.3 40 37.879 4 1024 x 768 60 65 48.363 5 XGA 1024 x 768 70 75 56.476 6 1024 x 768 75 78.75 60.023 3.6 Plug & Play This monitor meets the standard of VESA DDC. When usi
Inhaltszusammenfassung zur Seite Nr. 20
ENGLISH Model A05-15AX-C03 Mode Power Power consumption indicator On Green or blue <30 W Stand by/suspend Red flashing <5 W Off Off <3 W (include power adapter’s consumption) Model A05-17AM-C04 Mode Power Power consumption indicator On Green or blue <40 W Stand by/suspend Red flashing <5 W Off Off <3 W (include power adapter’s consumption) Model A05-19AM-C05 Mode Power Power consumption indicator On Green or blue <45 W Stand by/suspend Red flashing <5 W Off Off <3 W (includ
