Inhaltszusammenfassung zur Seite Nr. 1
SyncMaster 930ND
LCD Monitor
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Notational Conventions Important to read and under- Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Ground
Inhaltszusammenfassung zur Seite Nr. 3
Safety Instructions Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due to overheating. Do not disconnect the power cord while using the product. • Otherwise, this may result in damage to the product due
Inhaltszusammenfassung zur Seite Nr. 4
Safety Instructions DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGA- RETTES AND ANY HEATING APPLIANCES NEAR THE PROD- UCT. • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the prod- uct as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase or closet. • Otherwise, this may result in fire due to an increase in the internal temperature. Put down the monitor carefully
Inhaltszusammenfassung zur Seite Nr. 5
Safety Instructions Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean i
Inhaltszusammenfassung zur Seite Nr. 6
Safety Instructions When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or lightening is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product o
Inhaltszusammenfassung zur Seite Nr. 7
Safety Instructions When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. If you continually move closer to the product screen, your eyesight may be failing. To ease eye strain, take at least a five-minute break after every hour of using the monitor. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/
Inhaltszusammenfassung zur Seite Nr. 8
Safety Instructions Do not drop any objects onto the product or cause any impact to the product. • Otherwise, this may result in electric shock or fire. Do not use a humidifier or kitchen table near the product. • Otherwise, this may result in electric shock or fire. When there is a gas leak, do not touch the product or the power plug but ventilate immediately. • If a spark occurs, it may cause an explosion or fire. If the product has been turned on for a long time, the display panel becomes
Inhaltszusammenfassung zur Seite Nr. 9
Safety Instructions • Keep your elbow at 90 degrees. • Keep your knees at greater than 90 degrees, and keep your heels firmly on the floor. Keep your arms lower than your heart.
Inhaltszusammenfassung zur Seite Nr. 10
Introduction Features What is a PC over IP? This monitor can decode and display the screen of the server PC encoded and transmitted through the network (LAN) as well as display the computer screen like a conventional monitor. This monitor shows a far more improved performance than a normal RDP and has been designed to support a resolution of 1920*1080 pixels for high-quality graphic work. This monitor enables reinforced security because it is used by connecting it to a server PC and enabling use
Inhaltszusammenfassung zur Seite Nr. 11
Introduction Without stand With Stand Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all loca- tions) Cables Power Cord Sold separately Keyboard (USB) Mouse (USB) D-Sub Cable Your Monitor Initial Settings§ Select the language using the up or down key. The displayed content will disappear after 40 seconds. Turn the power button off and on. It will be displayed again. It can be displayed up to three (3) times. Make sure to adjust the resolution of your PC before reachi
Inhaltszusammenfassung zur Seite Nr. 12
Introduction Note The resolution displayed on the screen is the optimal resolution for this product. Adjust your PC resolution so that it is the same as the optimal resolution for this product. Front MENU button [MENU/ ] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Server Power button [ ] This button performs the role of the Power button for the server PC in Client mode and performs the role of the direction buttons in Analog mo
Inhaltszusammenfassung zur Seite Nr. 13
Introduction Power button [ ] Use this button for turning the product on and off. Power Indicator This light is lit when operating normally, and blinks once when your adjustments are saved. Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods. Speaker You can hear sound by connecting the soundcard of your PC to the monitor. Rear No
Inhaltszusammenfassung zur Seite Nr. 14
Introduction Connect the VGA IN terminal at the back of your product to your computer. USB / LAN USB Connection Terminal Connect USB devices such as a mouse, keyboard and external storage devices (DSC, MP3, external storage, etc.). LAN Connection Terminal Connect when using it as a monitor. DVI OUT Use it by connecting it to another monitor. USB / AUDIO IN USB Connection Terminal Connect USB devices such as a mouse, keyboard and external storage devices (DSC, MP3, external storage, etc.).
Inhaltszusammenfassung zur Seite Nr. 15
Introduction The Kensington Lock is a device used to physi- cally fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately. Note The location of the Kensington Lock may be dif- ferent depending on its model. Using the Anti-Theft Kensington
Inhaltszusammenfassung zur Seite Nr. 16
Connections Connecting Cables Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. • Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [VGA IN] Connected to a Macintosh. • Connect the monitor to the Macintosh computer using the D-sub connection cable. Note If the monito
Inhaltszusammenfassung zur Seite Nr. 17
Connections Connect USB devices such as a mouse, keyboard and external storage devices (DSC, MP3, external storage, etc.). Connect to the host PC using a LAN cable Host PC Hub LAN Cable Monitor Connect the power cord to the power terminal at the back of the monitor. Connect the mouse and the keyboard to the USB ports. Connect the LAN port on the back of the monitor and the hub. Connect the hub and the LAN port of the host PC. Note The host PC must have an IP address. After connecting the LAN a
Inhaltszusammenfassung zur Seite Nr. 18
Connections Use the VGA IN port to directly connect the monitor to a PC. Connect to the DVI OUT port to display the same picture on another monitor such as the projector. (For presentation purposes) Use the USB port to connect an external storage device (DSC, MP3, external storage, etc.). Connecting to one Host PC from many client device is possible only when virtualization solution like vmware is installed in Host PC Connecting Headphone Note You may connect your headphones to the monitor. 1.
Inhaltszusammenfassung zur Seite Nr. 19
Connections Using the Stand Swivel stand Using ( ), You can swivel the monitor left and right at an angle of 350× to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. When you try to rotate the monitor in the state of the power cord or cable connecting to the monitor, the power cord of cable can be destroyed. Tilt angle You can tilt the monitor screen forward to adjust the angle to a particular angle. Attaching a Base This monitor accepts a 100 mm x 100 mm VES
Inhaltszusammenfassung zur Seite Nr. 20
Connections Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. • Do not use screws longer than t
