Inhaltszusammenfassung zur Seite Nr. 1
SyncMaster 923NW / 2023 NW / 2223NW
Inhaltszusammenfassung zur Seite Nr. 2
Notational Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. The images here are for referen
Inhaltszusammenfassung zur Seite Nr. 3
Do not use a damaged power cord or plug or a damaged or loose power outlet. Otherwise, this may result in electric shock or fire. Do not touch the power plug with wet hands when removing or plugging the plug into the outlet. Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. Otherwise, it may result in electric shock or personal injury. Ensure that the power plug is plugged into the power outlet firml
Inhaltszusammenfassung zur Seite Nr. 4
Installation Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Do not drop the monitor when moving it. This may cause damage to the product or the person carrying it. Ensure that at least two pe
Inhaltszusammenfassung zur Seite Nr. 5
Do not place the front of the product on the floor. Otherwise, this may result in damage to the screen display. Ensure that an authorized installation company installs the wall mount. Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall. Otherwise, it may result in fire due to an increase in the internal tempera
Inhaltszusammenfassung zur Seite Nr. 6
Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it
Inhaltszusammenfassung zur Seite Nr. 7
Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. Otherwise, this may result in electric shock or fire. If thunder or lightening is occurring, do not touch the power cord or antenna cable. Otherwise, this may result in electric shock or fire. Do not
Inhaltszusammenfassung zur Seite Nr. 8
Do not insert any metal, such as chopsticks, coins, pins and steels, or inflammable objects, such as matches or paper, inside the product (through the ventilating openings, input and output terminals, etc). If water or foreign material enters the product, disconnect the power cord and contact a Service Center. Otherwise, this may result in electric shock or fire. When using a fixed screen for a long time, an afterimage or stain may occur. If you are not using your product for a lon
Inhaltszusammenfassung zur Seite Nr. 9
Do not place any heavy items or toys or confectionery, such as cookies etc. that may attract the attentions of children onto the product. Your children may hang onto the product causing it to fall and this may result in personal injury or death. Do not turn the product upside down or move it while holding only the stand. Otherwise, it may fall and result in personal injury and/or damage to the product. Do not place the product in a location exposed to direct sunlight or near
Inhaltszusammenfassung zur Seite Nr. 10
Do not install the product in a location low enough for children to reach. Otherwise, it may fall and result in personal injury. Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product. This may result in personal injury and/or damage to the product. Good Postures When Using the Monitor When using the product, use it in the correct position. Keep your back straight while look
Inhaltszusammenfassung zur Seite Nr. 11
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor With stand Monitor & Simple Stand Bottom Manual Warranty Card/ User's Guide, Quick Setup Guide Registration Card Monitor Driver (Not available in all
Inhaltszusammenfassung zur Seite Nr. 12
locations) Cable D-sub Cable Power Cord Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. Customized Key You can customize key assignment for the Custom button [] according to your preferences. You can configure the customized key for a required function via Setup > Customized Key. Brightness button When OSD is not on the screen, push the button to adjust [] brightness. Adjust items in the menu.
Inhaltszusammenfassung zur Seite Nr. 13
leaving it unattended for long periods. Rear Simple stand (The configuration at the back of the monitor may vary from product to product.) Connect the power cord for your monitor to the power port on the back POWER port of the monitor. RGB IN port Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be p
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-sub connection cable. If the monitor and th
Inhaltszusammenfassung zur Seite Nr. 15
Monitor and Bottom Attaching a Base This monitor accepts a 75.0 mm x 75.0 mm VESA-compliant mounting interface pad. Simple stand Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover
Inhaltszusammenfassung zur Seite Nr. 16
not be responsible for damages caused by using a base other than those specified. Please use Wall Mount according to the International standards. Installing the Monitor Driver (Automatic) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download th
Inhaltszusammenfassung zur Seite Nr. 17
Prepare a blank disk and download the driver program file at the Internet web site shown below. Internet web site : http://www.samsung.com/ (Worldwide) http://www.samsung.com/monitor (U.S.A) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/ (China) ® Microsoft Windows Vista™ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and "Control Panel". Then, double-click on "Appearance and Personalization". 3. Click "Personalizati
Inhaltszusammenfassung zur Seite Nr. 18
http://www.samsung.com/ 6. Click "Update Driver…" in the "Driver" tab. 7. Check the " " checkbox and click " Browse my computer for driver software Let me pick from a list of device drivers on my computer". 8. Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK". 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close"
Inhaltszusammenfassung zur Seite Nr. 19
® ® Microsoft Windows XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" Icon. 3. Click " " icon and choose the " " tab then click " ". Display Settings Advanced.. 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click " " and select " " then click " " button. Update Driver.. Install from a list or.. Next
Inhaltszusammenfassung zur Seite Nr. 20
6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the " " button then choose A:(D:\Driver) and choose your monitor model in the model list Browse and click the " " button. Next 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click " " button. OK This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be poste
