Inhaltszusammenfassung zur Seite Nr. 1
Table of Contents
Preface ...............................................................................................................................1
Chapter 1 Installation........................................................................................................2
Unpacking ............................................................................................................................................. 2
Connecting the LCD Monitor and Base .....................
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Instructions Please read the following instructions carefully. This manual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag. -- Gently clean the screen with dampened rag. 2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can severely damage it. 3. Do not apply pressure to the LCD screen. Exce
Inhaltszusammenfassung zur Seite Nr. 3
Detaching LCD Monitor from Its Stand Unscrew screws the swivel base support column and pull it from main body. Figure 1-3 Interface for Arm Applications Before installing to mounting device, please refer to Fig.1-3. The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-4. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragrap
Inhaltszusammenfassung zur Seite Nr. 4
Setting Up the LCD Monitor 1.Make sure the AC power cord is connected to the LCD Monitor. 2.Turn on the LCD Monitor's power switch, located on the bezel of the monitor. Power Management System This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal. When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED indicato
Inhaltszusammenfassung zur Seite Nr. 5
Adjusting the Monitor's Display The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments. OSD Function Menu To access OSD Main menu, simply press one of the Function Select control buttons, and the menu diagram will pop up on the screen as shown on Fig. 2-2: Continue pressing the Function Select buttons to scroll through the entire menu items ,then press Adjustment Control buttons to adjust content of selec
Inhaltszusammenfassung zur Seite Nr. 6
Exit To exit the main menu. Options OSD To move the OSD image. OSD H-position To move the OSD image horizontally left or right. OSD V-position To move the OSD image vertically up or down. Language You can choose one of the nine languages you need. Exit To exit the main menu. Utilities You can select how long the monitor waits after the last adjust of the key to OSD timeout shut off the OSD menu. The time setting choices are from 5 to 60 seconds. OSD background You
Inhaltszusammenfassung zur Seite Nr. 7
This features adjusts < to decrease left speaker volume and > to increase ATTL left speaker volume. This features adjusts < to decrease right speaker volume and > to increase ATTR right speaker volume. Loudness This features choose on or off to get loudness. Mute This features choose on or off to mute the sound. Exit To exit the main menu. Options OSD To move the OSD image. OSD H-position To move the OSD image horizontally left or right. OSD V-position To move the O
Inhaltszusammenfassung zur Seite Nr. 8
Video Input Signal Analog RGB 0.7Vpp Digital TMDS Input Impedance 75 Ohm ± 2% Polarity Positive, Negative Amplitude 0 - 0.7 ± 0.05 Vpp TMDS Multi-mode Supported Horizontal Frequency: 30 ~ 80 KHz 30~64KHz Vertical Frequency: 56 ~ 75 Hz 56~75 Hz Audio Input Signal 500mVrms Audio Power Output 1Wrms + 1Wrms Max Speaker 2W 8 Ω x 2 Composite Signal and S-Video Signal Support Input Signal Composite Video (NTSC/PAL) S-Video Y/C (NTSC/PAL) Input Impedance 75 Ohm ± 2% Amplitude 0 -
Inhaltszusammenfassung zur Seite Nr. 9
Power Supply (AC Input) Input Voltage Single phase, 100 ~ 240VAC, 50 / 60 Hz Input Current 1.5 A maximum Size and Weight Dimensions 381 (W) x 400 (H) x 147 (D) mm Net Weight 5.4 ± 0.3 kg Gross Weight 8.0 ± 0.3 kg Pin Assignment 6 Signal Signal PIN Description PIN Description PIN Description 11 1 1 Red 6 Red Rtn 11 NC 2 Green 7 Green Rtn 12 SDA 15 5 3 Blue 8 Blue Rtn 13 H. Sync. 4 Digital GND 9 +5V 14 V. Sync. 5 Digital GND 10 Hot Plug Detect 15 SCL 10 For Digital DVI-D conne
Inhaltszusammenfassung zur Seite Nr. 10
Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. H. Freq. V. Freq. Pixel Freq. H/V Sync. Resolution Mode (KHz) (Hz) (MHz) Polarity 640 x 480 31.469 59.940 25.175 -/- VGA-480 640 x 480 37.861 72.809 31.500 -/- VESA - 480 - 72Hz 640 x 480 37.500 75.000 31.500 -/- VESA - 480 - 75Hz 720 x 400 31.469 70.087 28.322 -/+ VESA-400-TEXT 800 x 600 37.879 60.317 40.000 +/+ VESA-600-60 Hz 800 x 600 48.077
