Inhaltszusammenfassung zur Seite Nr. 1
M170 Flat Panel Display
Touch Monitor User Guide
3M Touch Systems
Read and understand all safety information
contained in this document before using this product.
3M Touch Systems Proprietary Information
Inhaltszusammenfassung zur Seite Nr. 2
2 M170 FPD Monitor Installation Guide The information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 3M Touch Systems. 3M may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not
Inhaltszusammenfassung zur Seite Nr. 3
Contents Overview Important Safety Information....................................................................................5 Intended Use .......................................................................................................5 Explanation of Symbols......................................................................................6 Service and Repair Indicators....................................................................................7 3M Touch Systems
Inhaltszusammenfassung zur Seite Nr. 4
4 M170 FPD Monitor Installation Guide Lock Out Feature ..............................................................................................28 Chapter 4 Maintenance and Troubleshooting Maintaining Your Touch Monitor...........................................................................29 Touch Screen Care and Cleaning ............................................................................29 Monitor Installation Problems......................................................
Inhaltszusammenfassung zur Seite Nr. 5
Overview Welcome to the world of 3M Touch Systems — a world where using a computer is as simple as touching the screen. This guide describes how to set up your M170 Flat Panel Display (FPD) touch monitor. This document assumes you have basic computer skills. You should know how to use the mouse and keyboard, choose commands from menus, open and run application programs, and save files. Important Safety Information Read and understand all safety information before using this product. F
Inhaltszusammenfassung zur Seite Nr. 6
6 M170 FPD Monitor Installation Guide CAUTION To avoid the risk of electric shock which may result in minor or moderate injury: • The socket-outlet should be installed near the equipment and should be easily accessible. • Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below: USA UL Switzerland SEV Canada CSA Britain BASE/BS Germany VDE Japan Electric Appliance Control Act • Do not serv
Inhaltszusammenfassung zur Seite Nr. 7
Overview 7 • Do not expose this display to heat. Passive heat may cause damage to the case and other parts. • Do not install this display in areas where extreme vibrations may be generated. For example, nearby manufacturing equipment may produce strong vibrations. The vibrations may cause the display to exhibit picture discoloration or poor video quality. • Product weight varies from 18 to 24 pounds depending on the packaging, use caution when lifting. • Ensure that metal does not con
Inhaltszusammenfassung zur Seite Nr. 8
8 M170 FPD Monitor Installation Guide • Operating system used • Information on additional peripherals Technical Support is available Monday through Friday 8 a.m. to 8 p.m. US Eastern Standard Time – 9 a.m. to 5 p.m. throughout Europe. Limited call back service Saturdays and Sundays. You can contact 3M Touch Systems Technical Support (US only -- Eastern Standard Time) by calling the hot line, sending an email, or sending a fax. • Technical Support Hot Line: 978-659-9200 • Technical Sup
Inhaltszusammenfassung zur Seite Nr. 9
CHAPTER 1 Introduction to Flat Panel Displays The 3M Touch Systems product line of Flat Panel Display (FPD) touch monitors offers the M170 monitor for desktop and countertop applications with built-in multimedia options. Figure 1. The M170 Monitor The new M170 monitor features an innovative design adjustable to approximately 90° off the vertical to accommodate different counter and user heights, a positive locking mechanism, a touch screen interface, several mounting options, and bu
Inhaltszusammenfassung zur Seite Nr. 10
10 M170 FPD Monitor Installation Guide Capacitive and Resistive Options The monitor is available with 3M Touch System’s ClearTek® capacitive touch screen. Capacitive is the touch screen of choice for public access applications requiring high levels of durability and reliable performance 24 hours a day, 7 days a week. For those applications that require flexibility of input, including gloved hand use, we offer the M170 with a 5-wire resistive touch screen. This technology has been tested
Inhaltszusammenfassung zur Seite Nr. 11
CHAPTER 2 Setting Up Your M170 FPD Monitor This chapter describes how to set up and integrate your 3M Touch Systems M170 FPD monitor into a touch application. You need to complete the following tasks: • Unpack the components • Connect the video, touch screen, and power cables to your computer • Power on the monitor and test your setup • Install the touch screen software • Calibrate the touch screen System Requirements The M170 flat panel touch monitor requires a personal computer (P
Inhaltszusammenfassung zur Seite Nr. 12
12 M170 FPD Monitor Installation Guide Unpacking Your Touch Monitor Carefully unpack the carton and inspect the contents. Your M170 monitor comes with most of these cables already connected. DVI-I to 15-pin video cable 9-pin RS-232 serial communication (or DVI to DVI cable if applicable) cable (or USB cable if applicable) AC power cable AC/DC power supply (12V DC output) 6 3M CD with touch screen software, Multimedia audio cable documentation, and utilities (Not c
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2 Setting Up Your M170 FPD Monitor 13 Figure 2. Removing the Base Cover Base Cover 65-2220 Tabs 1. Make sure the monitor is in its full upright position. 2. Push in and lift up on each of the two tabs located on the left and right sides of the base cover. This action will release the base cover. 3. Slide the cover back towards you to remove. Figure 3. Releasing the Cable Connector Cover Cable Connector Cover Press in tabs 65-2219 4. Push in on the cable connector tabs a
Inhaltszusammenfassung zur Seite Nr. 14
14 M170 FPD Monitor Installation Guide Figure 4. Removing the Cable Connector Cover Keep tabs against LCD 65-2218 5. Lift this cover slightly so that the tabs are up against the rear of the LCD to keep them from catching on the cables below. Tilt the cover down as you slide the cover out from behind the support rods. Figure 5. Uncovered Cable Connections 65-2217 3M Touch Systems Proprietary Information
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 Setting Up Your M170 FPD Monitor 15 Figure 6. Disassembling the LCD from Its Base for Arm Mounting Step 1 – Unlock front mechanism and disconnect all cables from the LCD. Step 2 -- With the unit laying face down safely and securely on a nonabrasive surface, remove the two screws connecting the name plate and support rods to the LCD. Lift the support rods out of the base and set aside. Step 3 -- Then remove the four screws holding the hinge in place and gently remove the bas
Inhaltszusammenfassung zur Seite Nr. 16
16 M170 FPD Monitor Installation Guide Countertop Base Mounting Option Keyhole slots in the bottom of the base plate enable you to secure the unit to a desktop or countertop. Use standard screws in the desktop or countertop and then slide the base plate on for a secure fit. Note: A full size template has been included in the back of this manual for your convenience. Simply tear out the template and drill directly through the holes indicated to secure your monitor to any surface. Access
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 Setting Up Your M170 FPD Monitor 17 Figure 8. Adjusting the Viewing Angle Lift up latch to release lock and raise Push down latch to engage lock or lower display to suit your needs. and stabilize display position. Lift up on the latch to release lock. Adjust the M170 FPD by pushing or pulling on the top front of the monitor until the screen is at the best viewing angle for you. Then push down on latch to engage locking mechanism and stabilize display position. Installi
Inhaltszusammenfassung zur Seite Nr. 18
18 M170 FPD Monitor Installation Guide Table 1. Applicable Display Mode and Refresh Rate Display Mode Refresh Rate DOS 720 x 400 at 70Hz VGA 640 x 480 at 60Hz 640 x 480 at 72Hz 640 x 480 at 75Hz SVGA 800 x 600 at 56Hz 800 x 600 at 60Hz 800 x 600 at 72Hz 800 x 600 at 75Hz XGA 1024 x 768 at 60Hz 1024 x 768 at 70Hz 1024 x 768 at 75Hz 1152 x 864 at 75Hz SXGA 1280 x 1024 at 60Hz Configuring the Display Settings After you connect your M170 FPD and turn on your computer, you m
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 Setting Up Your M170 FPD Monitor 19 Multimedia Features The M170 FPD monitor comes with speakers built into the display bezel. The multimedia cable can be connected to the rear of the monitor for input. Figure 9. Multimedia Cable 6 Optional Card Reader Bracket The M170 FPD monitor is available with an optional card reader bracket (and (2) M3 screws) that supports IDTech and MagTech brand electronic card readers. The M170 has been designed with slots on either side of the b
Inhaltszusammenfassung zur Seite Nr. 20
20 M170 FPD Monitor Installation Guide Table 2. Supported Mag Stripe Card Readers ID Tech® MagTek® all MiniMag™ readers all "mini" sized readers IDT 3331-02U IDT 3321-33 2180201 IDT 3331-12U IDT 3321-33PP 2180202 IDT 3331-23U IDT 3331-02 2180203 IDT 3331-33U IDT 3331-12 2180204 IDT 3321-02 IDT 3331-23 2180205 IDT 3321-02PP IDT 3331-33 2180206 IDT 3321-12 IDT3301-02 21040103 IDT 3321-12PP IDT3301-12 21040104 IDT 3321-23 IDT3301-23 IDT 3321-23PP IDT3301-33 Con
