Inhaltszusammenfassung zur Seite Nr. 1
3-100-042-12 (1)
LCD Monitor
Operating Instructions
LMD-2050W
LMD-2450W
© 2007 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
All interface cables used to connect peripherals must be WARNING shielded in order to comply with the limits for a digital To reduce the risk of fire or electric shock, do device pursuant to Subpart B of Part 15 of FCC Rules. not expose this apparatus to rain or moisture. WARNING: To avoid electrical shock, do not open the Using this unit at a voltage other than 120 V may require cabinet. Refer servicing to qualified personnel the use of a different line cord or attachment plug, or only.
Inhaltszusammenfassung zur Seite Nr. 3
For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (www.eiae.org). 3
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Precaution ..............................................................5 On Safety ............................................................ 5 On Installation .................................................... 5 Handling the LCD Screen .................................. 5 About the Fluorescent Tube ............................... 5 On Cleaning ....................................................... 5 On Repacking ..................................................... 6 On
Inhaltszusammenfassung zur Seite Nr. 5
� If the unit is used in a cold place, horizontal lines or a residual image may appear on the screen. This is not Precaution a malfunction. When the monitor becomes warm, the screen returns to normal. � If a still picture is displayed for a long time, a residual On Safety image may appear. The residual image will eventually disappear. � Operate the unit only with a power source as specified � The screen and the cabinet become warm during in the “Specifications” section. operation. Thi
Inhaltszusammenfassung zur Seite Nr. 6
On Repacking Features Do not throw away the carton and packing materials. They make an ideal container which to transport the unit. The LMD-2450W (24-inch)/LMD-2050W (20-inch) is a multiple format LCD monitor for broadcast or business use featuring a precise image and high performance. It supports both digital or analog main On Mounting on a Rack broadcast signal and PC input. It is also equipped with functions to adjust for various objects or use. Leave 1U space empty above and below t
Inhaltszusammenfassung zur Seite Nr. 7
Rack mount On-screen menus The monitor supports the VESA (100 × 100) standard. You can set the appropriate settings according to the The LMD-2050W may be mounted on an EIA-standard connected system by using the on-screen menus. 19-inch rack (using an optional mounting bracket). Select language display Two-display You can select from seven display languages, English, Two kinds of input signals are put on the monitor. French, German, Spanish, Italian, Japanese and Chinese. For more information,
Inhaltszusammenfassung zur Seite Nr. 8
Location and Function of Parts and Controls Front Panel 1 2 3 COMPOSITE 4 + 5 Y/C – RGB + COMPONENT 6 – A-1 + qa 7 A-2 – B-1 + B-2 8 – HD15 + 9 DVI – F1 + F2 – qs F3 0 F4 qd qf a Tally lamp f CONTRAST buttons You can check the status of the monitor by the color of Adjusts the picture contrast. the tally lamp. Press the + button to make the contrast higher or the – The tally lamp lights in red, green or amber according to button to make it lower. the setting of PARALLEL REMOTE in the REMOTE g P
Inhaltszusammenfassung zur Seite Nr. 9
+/– buttons You can assign the function from among SCAN, Press to select the items and setting values. ASPECT, EXT SYNC, BLUE ONLY, MONO, ENTER button MARKER, H/V DELAY, MULTI DISPLAY, CLOSED Press to confirm a selected item on the menu. CAPTION and APA in FUNCTION BUTTON When the menu is not displayed and the button is SETTING of the USER CONFIG menu (see page 28). pressed, the distinguished signal format is displayed. For details of the function assigned to the function RETURN button butt
Inhaltszusammenfassung zur Seite Nr. 10
Input signals and adjustable/setting items Input signal 3 3 4 4 Item Video* , B & W* Component* RGB* SDI Computer 3 Y/C* 5 6 SD HD SD HD D1* HD* DVI HD15 1 CONTRAST* a a a a aaaa a a 1 BRIGHT* a a a a aaaa a a 1 CHROMA* a × aa ×× aa a a 1 PHASE* a × × ×××× × aa (NTSC) APERTURE a a a a aaaa a a COLOR TEMP a a a a aaaa a a COLOR SPACE a a a a aaaa a a AUTO CHROMA/ a aa ×× × ××× × PHASE ACC a × × ×××× × × × CTI a × a ×××× × × × V SHARPNESS aa a × a × a ×× × 2 MATRIX* × ×× a ××× × × × COMPONENT LEV
Inhaltszusammenfassung zur Seite Nr. 11
Rear/Bottom Panel 123 4 5 6 7 8 9 0 – qa qs qd qfqg qh qj qk a a/? (power) switch i R/PR IN connector (BNC) The power is turned on or off. Input connector for R of RGB signals and PR (red color The monitor is turned on by pressing side ?. difference) of component signals. b AC IN socket j EXT SYNC IN/OUT (external sync) connectors Connect the supplied AC power cord. (BNC) To use the external sync signal, press the function button c DC 24V IN connector that EXT SYNC is assigned (F1 button at
Inhaltszusammenfassung zur Seite Nr. 12
k AUDIO L/R OUT connectors (phono jack) p SERIAL REMOTE RS-232C connector (D-sub Outputs the audio signal which is selected by the input 9-pin, female) select button on the front panel. Connect to the RS-232C control connector on external When BKM-220D or BKM-243HS is not installed, equipment connected to the monitor. The monitor can output the audio signal which is selected in INPUT be operated according to control commands sent from SELECT of the USER CONFIG menu (see page 29). external e
Inhaltszusammenfassung zur Seite Nr. 13
+ Y/C – RGB + – A-1 + A-2 – B-1 + B-2 – HD-15 + DVI – F1 F2 + – F3 F4 4 Remove the arm. Installing to the Rack (LMD-2050W only) You can attach the monitor to the rack after removing the stand. 1 Put the monitor on a soft cloth with the surface of the LCD monitor downward. 5 Remove four screws to remove the stand attachment bracket. 2 Slide and remove the arm cover of the stand. 6 Attach the mounting bracket, then attach the unit to the rack with four screws. Note The screws are not supplied
Inhaltszusammenfassung zur Seite Nr. 14
LMD-2450W Adjusting the Height of AAA A the Stand BB AA – + You can adjust the height of the monitor in four levels for the LMD-2050W and three levels for the LMD- BB 2450W by changing the position of the stand attachment bracket and the arm attachment position. Depending on the height, you can install the input adaptor with the stand attached to the monitor. A: Screw holes for low position B: Screw holes for high position A and B in the following list indicate the screw holes shown in the
Inhaltszusammenfassung zur Seite Nr. 15
– + – + These screws are used for each display at the factory. Connecting the AC + – + + – Power Cord – + + – – + + – – + + – – + – + + – – 1 Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket AC power cord AC plug holder (Supplied) 2 Slide the AC plug holder over the cord until it locks. To disconnect the AC power cord Pull out the AC plug holder while pressing the lock levers. 15 Connecting the AC
Inhaltszusammenfassung zur Seite Nr. 16
PARALLEL REMOTE SERIAL REMOTE Installing the Input Selecting the Default Adaptor Settings Before installing the input adaptor, disconnect the power When you turn on the unit for the first time after cord. purchasing it, select the area where you intend to use this unit from among the options. 1 Remove the panel of the optional input slot. The default setting values for each area 3 1 5 4 2 2 Insert the input adaptor into the slot. 3 3 COLOR COMPONENT NTSC COLOR TEMP LEVEL SETUP SPACE 1NORTH
Inhaltszusammenfassung zur Seite Nr. 17
2 If LATIN AMERICA is selected: PAL&PAL-N area L A T I N A M E R I C A + P A L & P A L - N _ A R E A – Argentina A R G E N T I N A + P A R A G U A Y Paraguay – U R U G U A Y + N T S C & P A L - M A R E A Uruguay – O T H E R A R E A + 1 NTSC&PAL-M area – + Other area – + + – – 2~3 4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown in the map below should select NTSC AREA. Other customers should select PAL AREA. 1 Turn on the unit with t
Inhaltszusammenfassung zur Seite Nr. 18
The setting items (icons) in the selected menu are displayed in yellow. Selecting the Menu Language USER CONFIGtSYSTEM SETTING MATRIX: xxx COMPONENT LEVEL: xxxx NTSC SETUP: x You can select one of seven languages (English, French, SCAN: xxxxx FORMAT DISPLAY: xxxx German, Spanish, Italian, Japanese, Chinese) for LANGUAGE: ENGLISH displaying the menu and other on-screen displays. POWER SAVING: xxx “ENGLISH (English)” is selected in the default setting. PICTURE DELAY MIN: xxx The current settin
Inhaltszusammenfassung zur Seite Nr. 19
The menu icon presently selected is shown in yellow and setting items are displayed. Using the Menu USER CONFIGtSYSTEM SETTING The unit is equipped with an on-screen menu for making MATRIX: xxx COMPONENT LEVEL: xxxxx various adjustments and settings such as picture control, NTSC SETUP: x input setting, set setting change, etc. You can also SCAN: xxxxxx FORMAT DISPLAY: xx change the menu language displayed in the on-screen LANGUAGE: ENGLISH menu. POWER SAVING: xx PICTURE DELAY MIN: x To chang
Inhaltszusammenfassung zur Seite Nr. 20
About the memory of the settings The settings are automatically stored in the monitor Adjustment Using the memory. Menus Items The screen menu of this monitor consists of the following items. STATUS (the items indicate the current settings.) For the video input FORMAT COLOR TEMP COMPONENT LEVEL NTSC SETUP SCAN MODE POWER SAVING Model name and serial number OPTION A and serial number OPTION B and serial number For the DVI/HD15 input FORMAT fH fV COLOR TEMP POWER SAVING Model name and serial n
