Bedienungsanleitung SIIG 04-0202A

Inhaltszusammenfassung zur Seite Nr. 1

Low Profile PCI I/O
Quick Installation Guide
Introducing the Low Profile PCI I/O
The Low Profile PCI I/O conforms to the new PCI card form factor
standard made for space constrained system designs. Since this
installation guide is written for both, Low Profile PCI -1S and Low Profile
PCI -1P boards, some features on this installation guide might not be
present on the model you bought. Please only refer to the features that
apply to your board.
Features and Benefits
• Conforms to PCI v2.2 Plug

Inhaltszusammenfassung zur Seite Nr. 2

Package Contents • One Low Profile PCI I/O board • One Driver Installation diskette • One 5-year warranty card • This quick installation guide Hardware Installation General instructions for installing the card are provided below, since the design of computer cases and motherboards vary. Refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in your body by touchin

Inhaltszusammenfassung zur Seite Nr. 3

3. From the Insert Disk window, click OK. When the Copying Files dialog box appears, type in a:\Win95, then click OK. 4. Remove the diskette and select Yes to restart the computer for the setup to take effect. Windows 98/98 SE: 1. At the Add New Hardware Wizard windows, click Next. 2. Select Search for the best driver for your devices (Recommend), then click Next. 3. Select Specify a location, insert the Driver Installation diskette and type in a:\Win98, then clickNext. 4. Click Next, then Fini

Inhaltszusammenfassung zur Seite Nr. 4

4. From Choose Destination Location window, click Next. 5. Remove the Driver Installation diskette, select Yes to restart Windows and click Finish. To verify successful installation in Windows NT 4.0: 1. Go to Start / Setting / Control Panel, double click SIIG Cyber PCI 20X device icon. 2. New COM port address and LPT number will be assigned for the ports when successfully installed. The board is ready to connect devices. Note If you plan to connect a parallel device other than a printer to t

Inhaltszusammenfassung zur Seite Nr. 5

DOS/Windows 3.1x: 1. Insert the Driver Installation diskette, from the C: prompt, type in copy a:\dos\*.*, then press . 2. Type in edit autoexec.bat, then press . 3. Add C:\CB20XPC.exe at the bottom of the autoexec.bat file. 4. Go to File, save the changes and exit. 5. Remove the diskette and restart the system for the new setup to take effect. 5

Inhaltszusammenfassung zur Seite Nr. 6

Troubleshooting Problem: I am installing a parallel port(s) and my system freezes up when Windows tries to install the driver for my printer port. Solution: Enter your system bios, set the onboard parallel port I/O address to 278h, save and exit. In certain systems, the address 278h is reserved for ISA boards. So when the PCI parallel port tries to capture this address, your system gets confused and freezes up. Problem: I am installing serial port(s) and these ports show up without COM port as

Inhaltszusammenfassung zur Seite Nr. 7

Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on ONLINE SUPPORT. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away. Return Merchandise Authorization (RMA) SIIG warrants to the original buyer of the product that the hardware is free of defects in materials and workmanship for a period of one, two or five years from the date of purchas

Inhaltszusammenfassung zur Seite Nr. 8

PRODUCT NAME MODEL NUMBER Low Profile PCI I/O LP04xx FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTICE: This equipment