Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ® ® Intel and Pentium are registered trademarks of Intel Corporation. AMD, Athlon™, Athlon™ XP, Th
Inhaltszusammenfassung zur Seite Nr. 3
Safety Instructions 1. Always read the safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Keep this equipment away from humidity. 4. Lay this equipment on a reliable flat surface before setting it up. 5. The openings on the enclosure are for air convection hence protects the equip- ment from overheating. DO NOT COVER THE OPENINGS. 6. Make sure the voltage of the power source and adjust properly 110/220V be- fore connecting the equipment to the power inlet. 7. Pla
Inhaltszusammenfassung zur Seite Nr. 4
FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor- dance with the instructions, may cause harmful interference to radio communications. Howev
Inhaltszusammenfassung zur Seite Nr. 5
WEEE (Waste Electrical and Electronic Equipment) Statement v 7242v1.0-Preface.p65 5 2006/5/30, 下午 05:39
Inhaltszusammenfassung zur Seite Nr. 6
vi 7242v1.0-Preface.p65 6 2006 /5/30, 下午 05:39
Inhaltszusammenfassung zur Seite Nr. 7
vii 7242v1.0-Preface.p65 7 2006 /5/30, 下午 05:39
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS Copyright Notice ..............................................................................................................ii Trademarks .......................................................................................................................ii Revision History ..............................................................................................................ii Technical Support .............................................................................
Inhaltszusammenfassung zur Seite Nr. 9
TV-Out Connector: JTV1 (Optional)......................................................... 2-19 Jumpers .............................................................................................................. 2-20 Clear CMOS Jumper: JBAT1 ..................................................................... 2-20 Slots .................................................................................................................... 2-20 PCI (Peripheral Component Interconnect) Express Slot
Inhaltszusammenfassung zur Seite Nr. 10
Appendix C. ATI SURROUNDVIEWTM ...................................................................C-1 Introduction .......................................................................................................... C-2 System Requirements ................................................................................ C-3 Before You Begin ........................................................................................ C-4 Basic Graphics Card Installation .........................
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Chapter 1 Getting Started Thank you for choosing the K9AGM Series (MS-7242 v1.X), an excellent Micro ATX mainboard from MSI. ® Based on the innovative ATI RS485/RS485C & SB600 controllers for optimal system efficiency, the K9AGM ® Series accommodates the latest AMD Sempron / Athlon64 / Athlon64 X2 AM2 processors in Socket 940 package and supports up to four 240-pin DDRII 800/ 667/533/400 DIMM slots to provide the maximum of 8GB memory capacity. 1-1
Inhaltszusammenfassung zur Seite Nr. 12
MS-7242 Mainboard Mainboard Specifications Processor Support - AMD Sempron/Athlon64/Athlon64 X2 AM2 processors in Socket 940 - Supports 3/4 pin CPU Fan with Fan Speed Control - Supports up to 5000+ and higher CPU Supported FSB - 1000 MHz Chipset - North Bridge: ATI RS485/RS485C chipset (optional) - South Bridge: ATI SB600 chipset Memory Support - DDRII 800/667/533/400 DRAM (8GB Max) - 4 DIMMs DDRII (240pin / 1.8V) LAN (Optional) - Supports PCI LAN Realtek RTL8100C (10/100) or RTL8110SB/SC (10/10
Inhaltszusammenfassung zur Seite Nr. 13
Getting Started Connectors Back Panel - 1 PS/2 mouse port - 1 PS/2 keyboard port - 1 DVI port (optional) - 1 VGA port - 1 parallel port supporting SPP/EPP/ECP mode - 4 USB 2.0 ports - 1 LAN jack (optional 10/100Mbps or Gigabit) - 3 flexible audio jacks - 1 1394 port (optional) Onboard Pinheaders - 3 USB 2.0 pinheaders - 1 1394 pinheader (optional) - 1 TV-out pinheader (optional) - 1 Audio header (rear/center/side output) Slots - 1 PCI Express x16 slot - 2 PCI slots - 1 PCI Express x 1 slot Form
Inhaltszusammenfassung zur Seite Nr. 14
MS-7242 Mainboard Mainboard Layout Top: Mouse Bottom: Keyboard CPUFAN1 SYSFAN1 Winbond JCI1 Top : Parallel Port Bottom: DVI Port (optional) VGA Port JPW1 Top: LAN Jack Bottom: USB Ports JTV1 (optiona l) Top: 1394 Port (optional) Bottom: USB Ports ATI T: Line-In RS485/RS485C M: Line- Out (optional) B: MIC-Int PCI _EX1 JCOM1 PCI _EX2 BIOS RTL8 110SB /SC ATI RTL8100C SB600 PCI1 (optional) BATT + VIA VT6307/ VT6308 ALC883/ PCI 2 ALC888 (optional) (optional) JBAT1 JUSB3 SPDOUT1 JUSB2 JUSB1 JAUD1 J
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
Hardware Setup Chapter 2 Hardware Setup This chapter provides you with the information about hardware setup procedures. While doing the installation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly. Use a grounded wrist strap before handling computer components. Static electricity may damage the components. 2-1
Inhaltszusammenfassung zur Seite Nr. 17
MS-7242 Mainboard Quick Components Guide JPW1, p.2-10 DDRII DIMMs, p.2-6 JTV1,p.2-19 SYSFAN1, p.2-13 CPUFAN1, p.2-13 CPU, p.2-3 JCI1, p.2-14 Back Panel I/O, p.2-9 FDD1, p.2-11 ATX1, p.2-10 JCOM1,p.2-17 PCI Express IDE1, p.2-11 Slots, p.2-21 BIOS PCI Slots, p.2-21 SATA1~4, p.2-12 JAUD1, p.2-14 JFP1, p.2-16 JFP2, p.2-16 JCD1, p.2-14 J1, p.2-15 J1394_1, p.2-13 JBAT1, p.2-20 SPDOUT1, p.2-15 JUSB1/2/3, p.2-18 SPDIN1, p.2-15 2-2
Inhaltszusammenfassung zur Seite Nr. 18
Hardware Setup CPU (Central Processing Unit) ® The mainboard supports AMD Sempron / Athlon64 / Athlon64 X2 AM2 processors in Socket 940. When you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. For more information on compatible components, please visit http://www.msi.com. tw/program/products/ma
Inhaltszusammenfassung zur Seite Nr. 19
MS-7242 Mainboard CPU Installation Procedures for Socket AM2 1. Please turn off the power and unplug the power cord before Open the lever installing the CPU. Sliding the plate 90 degree 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle. 3. Look for the gold arrow on the Gold arrow CPU. The gold arrow should point as shown in the picture. The CPU can only fit in the correct orientation.Lower the CPU down onto the socket. Correct CPU placeme
Inhaltszusammenfassung zur Seite Nr. 20
