Inhaltszusammenfassung zur Seite Nr. 1
P5KPL-AM SE
Motherboard
Inhaltszusammenfassung zur Seite Nr. 2
E4323 Second Edition V2 November 2008 Copyright © 2008 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product warranty or service will not be extende
Inhaltszusammenfassung zur Seite Nr. 3
Contents Notices .......................................................................................................... v Safety information ...................................................................................... vi About this guide ......................................................................................... vi P5KPL-AM SE specifications summary .................................................. viii Chapter 1: Product information 1.1 Before you proceed ..........
Inhaltszusammenfassung zur Seite Nr. 4
Contents 2.3.3 Primary IDE/SATA ........................................................... 2-5 2.3.4 Storage Configuration ..................................................... 2-5 2.3.5 System Information ......................................................... 2-6 2.4 Advanced menu ........................................................................... 2-6 2.4.1 JumperFree Configuration .............................................. 2-6 2.4.2 USB Configuration ...........................
Inhaltszusammenfassung zur Seite Nr. 5
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Inhaltszusammenfassung zur Seite Nr. 6
Safety information Electrical safety • To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cabl
Inhaltszusammenfassung zur Seite Nr. 7
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Where to find more info
Inhaltszusammenfassung zur Seite Nr. 8
P5KPL-AM SE specifications summary ® CPU LGA775 socket for Intel Core™2 Quad/ Core™2 ® ® Extreme / Core™2 Duo / Pentium D / Pentium 4 / ® Celeron E1000 Series and Celeron 400 Series Processors ® Compatible with Intel 05B / 05A / 06 processors ® Intel Hyper-Threading Technology ready (Refer to www.asus.com for Intel CPU support list) ® Chipset Northbridge: Intel G31 ® Southbridge: Intel ICH7 Front Side Bus 1600(O.C.) / 1333 / 1066 / 800 / 533MHz Memory Dual channel memory architecture
Inhaltszusammenfassung zur Seite Nr. 9
P5KPL-AM SE specifications summary Internal connectors 2 x USB 2.0 connectors supports additional 4 USB ports 1 x internal speaker connector 2 x Serial ATA connectors 1 x CPU fan connector 1 x Chassis fan connector 1 x CD audio in connector 1 x 24-pin EATXPWR 12 V power connector 1 x 4-pin ATX 12 V power connector 1 x Front panel High Definition audio connector 1 x System Panel connector ASUS Exclusive SFS (Stepless Frequency Selection) Overclocking Features - FSB turning from 133MHz
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 1 Product introduction ® Thank you for buying an ASUS P5KPL-AM SE motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in your motherboard package. Refer to page ix for the list of accessories. If any of the items is damaged or missing, contact your retailer. 1.1 Before you proceed Take note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall s
Inhaltszusammenfassung zur Seite Nr. 11
1.2 Motherboard overview 1.2.1 Motherboard layout Ensure that you install the motherboard into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis. 18.3cm(7.2in) KBMS ATX12V CPU_FAN LGA775 USB34 Place this side towards LAN1_USB12 the rear of the chassis. ® Intel G31 CHA_FAN AUDIO RTL 8102FL PCIEX16 Lithium Cell CMOS Power ® Super Intel I/O ICH7 PCIEX1_1 P5KPL-AM SE SPEAKER PCI1 CLRTC ALC662 8Mb BIOS USBPW5-8 F_PANEL SB_PWR USB56 PRI_IDE US
Inhaltszusammenfassung zur Seite Nr. 12
1.3 Central Processing Unit (CPU) ® The motherboard comes with a surface mount LGA775 socket designed for the Intel Core ® ® ® ™2 Quad / Core™2 Extreme / Core™2 Duo / Pentium D / Pentium 4 and Celeron E1000 Series and Celeron 400 Series processors. • Ensure that all power cables are unplugged before installing the CPU. • Upon purchase of the motherboard, make sure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is miss
Inhaltszusammenfassung zur Seite Nr. 13
• You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or more memory o
Inhaltszusammenfassung zur Seite Nr. 14
DIMM support S S / Size Vendor Model CL Brand Component DS A* B* 1G Apacer 78.01092.420 5 Elpida DS E5108AE-6E-E • • 1G Apacer AU01GE667C5KBGC 5 Apacer DS AM4B5708MIJS7E0627B • • 512MB ADATA M20EL5G3H3160B1C0Z N/A Elpida SS E5108AE-6E-E • • 512MB ADATA M20AD5G3H3166I1C52 N/A ADATA SS AD29608A8A-3EG20648 • • 512MB ADATA M20AD5G3H3166I1C52 N/A ADATA SS AD29608A8A-3EG20718 • • 1G ADATA M2OAD5G3I4176I1C52 N/A ADATA DS AD29608A8A-3EG20645 • • 512MB VDATA M2GVD5G3H31A4I1C52 N/A VDATA SS VD29608
Inhaltszusammenfassung zur Seite Nr. 15
DIMM support S S / Size Vendor Model CL Brand Component DS A* B* 1G Samsung KR M378T2953CZ3-CE7 N/A Samsung DS K4T51083QC-ZCE7 • • 256MB Qimonda HYS64T32001HU-2.5-A N/A Qimonda SS HYB18T256800AF25SSS49313 • • 512MB Qimonda HYS64T64020HU-2.5-A N/A Qimonda DS HYB18T256800AF25SSS25063 • • 1G Corsair CM2X1024-6400 5 Corsair DS Heat-Sink Package • • 1G Corsair XMS2-6400 4 Corsair DS Heat-Sink Package • • 1G Corsair XMS2-6400 5 Corsair DS Heat-Sink Package • • 512MB HY HYMP564U64AP8-S6 AA N/A H
Inhaltszusammenfassung zur Seite Nr. 16
1.5 Expansion slots In the future, you may need to install expansion cards. Refer to the technical documentation that come with your expansion card for installation details. Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.5.1 PCI slot The PCI slot supports cards such as LAN cards, SCSI cards, USB cards, and other cards that comply with the PCI specifications. 1.5.2 PCI Express x1 slo
Inhaltszusammenfassung zur Seite Nr. 17
2. Clear RTC RAM (CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system •words. To erase the RTC RAM: 1. Turn OFF the computer and unplug the power cord. 2. Remove the onboard battery. 3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep
Inhaltszusammenfassung zur Seite Nr. 18
3. Keyboard/mouse power (3-pin PS2_USBPW1-4) This jumper allows you to enable or disable the keyboard/mouse and USB port 5-6 wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard (the default is the Space Bar), clicking the mouse, or using a USB device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The USBPW56 jumper is for the rear USB
Inhaltszusammenfassung zur Seite Nr. 19
3. Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources. 4. Line Out port (lime). This port connects to a headphone or a speaker. In 4-channel and 6-channel configuration, the function of this port becomes Front Speaker Out. 5. Microphone port (pink). This port connects to a microphone. Refer to the audio configuration table below for the function of the audio ports in 2, 4, or 6-channel configuration. Audio 2, 4, 6-channel configuration Port Head
Inhaltszusammenfassung zur Seite Nr. 20
2. IDE connector (40-1 pin PRI_IDE) The onboard IDE connector is for the Ultra DMA 100/66/33 signal cable. There are three connectors on each Ultra DMA 100/66/33 signal cable: blue, black, and gray. Connect the blue connector to the motherboard’s IDE connector, then select one of the following modes to configure your device. Driver Jumper setting Mode of device(s) Cable connector Single device Cable-Selected or Master - Black Two devices Cable-Select Master Black Slave Gray Master Master Blac
