Inhaltszusammenfassung zur Seite Nr. 1
Graphics Card LVU2E1
User's Manual
LVU2E1
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Graphics Card LVU2E1 User's Manual
Inhaltszusammenfassung zur Seite Nr. 4
FCC Information FCC (U.S. Federal Com mu ni ca tions Com mis sion) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea son able protection against harmful in ter fer ence in a res i den tial in stal la tion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the in struc tions, may cause harmful inter
Inhaltszusammenfassung zur Seite Nr. 5
Contents 1. Introduction ........................................................................................................4 Package contents ................................................................................................4 Hardware requirements .......................................................................................4 Safety precautions ...............................................................................................4 2. Hardware Installation ..
Inhaltszusammenfassung zur Seite Nr. 6
1. Introduction This manual explains how to use this graphics card along with TOTOKU LCD displays. Package contents Confi rm that the package contains the following items. Graphics card LVU2E1 ...........1 Driver CD ................................1 User’s Manual ........................1 Hardware requirements • DOS/V PC or a workstation with an Intel Pentium4- or Athlon64-equivalent processor or higher • PCI Express x16 compliant slot (x1) • Microsoft Windows 2000/XP • System memory: 128MB or
Inhaltszusammenfassung zur Seite Nr. 7
2. Hardware Installation Notices Please read the following notices before installing the graphics card. ● Make sure that your operating system is installed properly. ● Uninstall all previously installed drivers and display-related software such as Pivot. ● Log in as a user with administrative privileges to install the driver. ● Remove all currently installed old graphics card. ● Proper operation of this graphics card is not guaranteed when used with other graphics cards for a multi-display setu
Inhaltszusammenfassung zur Seite Nr. 8
See the table below to check in what orientation ME551i2 is. Display mode LED behavior upon turn-on The LED blinks just once. Portrait (default) The LED blinks twice. Landscape 1 Connect one end of the DVI cable supplied with the display to LVU2E1 and the other end to the display and tighten the screws on the connectors. Caution Careful not to break the connector pins by trying to insert the DVI connector at an angle. Graphics card connectors (female): Note: • LVU2E1 has two DVI connectors
Inhaltszusammenfassung zur Seite Nr. 9
2 To use two displays, connect the other display as well. Connecting the power cables Connect all power cables to the wall outlets, including the computer, the display, and other peripheral devices. - 7 - ENGLISH
Inhaltszusammenfassung zur Seite Nr. 10
3. Software Installation and Setup Follow the instructions below to install the software (display driver) and set it up using the setup program included in the accompanying CD-ROM. See Q&A if any problem occurs. Installing the display driver software 1 Turn on the display and start up the computer. 2 Confi rm that the VGA boot screen appears followed by the Windows startup screen. 3 Log into Windows as a user with administrative privileges. 4 Select Control Panel>Add/Remove Programs from the
Inhaltszusammenfassung zur Seite Nr. 11
2) Insert the driver CD in the CD-ROM drive. If the following screen appears, click "Cancel." 3) Double-click Setup.exe in DriverCD/XP2K directory included in the CD-ROM. 4) If the Hardware Installation screen appears, click "Continue Anyway." 5) When the InstallShield Wizard starts up, click "Next." - 9 - ENGLISH
Inhaltszusammenfassung zur Seite Nr. 12
6) At the end of installation, the InstallShield Wizard Complete screen appears. For those using two displays on Windows 2000, select "No, I will restart my computer later" and click "Finish;" for those using a single display on Windows 2000 and all Windows XP users, select "Yes, I want to restart my computer now" and click "Finish." Windows 2000 (single-display) & Windows XP Windows 2000 (multi-displays) Setting up the display settings For those who are using two displays on Windows 2000, s
Inhaltszusammenfassung zur Seite Nr. 13
For multi-display environments on Windows 2000: 2K-1: Access the Display Properties dialog box and click the Settings tab. 2K-2: Select "Ture Color (32bit)" from the Colors drop-dowm menu. 2K-3: Set a resolution using the Screen Area slider. 2K-4: Click "Advanced" on the Settings tab, and another dialog box appears. 2K-5: Select the Quadro FX 1500 tab, and a popup menu appears to the side. Note: When another graphics card coexists, the Quadro FX 1500 tab will not appear. In that case, a display
Inhaltszusammenfassung zur Seite Nr. 14
3 Set a resolution using the Screen resolution slider. 4 Select 32 bit color from the Color quality drop-down menu. Note: "True Color (32bit)" on Windows 2000, "High (32bit)" on Windows XP 5 Click "Advanced," select the Monitor tab, and check the refresh rate (see the table on the previous page). If necessary, select an appropriate refresh rate and click "OK." Note: As for ME551i2, 50Hz refresh rate is recommended unless otherwise required. 6 (Windows XP users) When two displays are connected,
Inhaltszusammenfassung zur Seite Nr. 15
Portrait orientation on ME201L/ME251i/CCL202/CCL212/CCL250i: To use ME201L, ME251i, CCL202, CCL212, and CCL250i in portrait orientation, follow the instructions below. Note: In a multi-display setup, horizontal span mode is not available (see Chapater 4 for detailed information on multi-display modes). 1) Select Display Properties>Settings(tab). 2) Select a display icon and click "Advanced." 3) Select the Quadro FX 1500 tab, and a popup menu appears to the side. Note: When another graphics car
Inhaltszusammenfassung zur Seite Nr. 16
4. Software Uninstallation Follow the instructions below to uninstall the display driver for LVU2E1. 1 Log into Windwos as a user with administrative privileges. 2 Select Control Panel>Add/Remove Programs from the Start menu. 3 Delete "NVIDIA drivers" from the Currently installed programs list. Note: If a program named "NVIDIA Windows 2000/XP Display Drivers" exists, uninstall it as well. 4 End all applications and restart the computer. Note: To complete uninstallation, make sure to restart t
Inhaltszusammenfassung zur Seite Nr. 17
Changing multi-display modes 1 Select Display Properties>Settings(tab) and select a subject display's icon. 2 Select Advanced>Quadro FX 1500(tab) and select "nView Display Settings" from the popup menu. Note: When another graphics card coexists, the Quadro FX 1500 tab will not appear. In that case, a display on another card needs to be detached for now. Right-click the subject display icon on the Settings tab and uncheck "Attached" on the right-click menu, or uncheck "Extend my Windows desk
Inhaltszusammenfassung zur Seite Nr. 18
6. Q&A Prior to installation What are the supported operating systems? Windows 2000/XP How many displays can this card take? 2 displays per card. What are the supporting TOTOKU displays? See the table below: Pixels Display model 2MP ME201L, ME213L, ME251i, CCL202, CCL212, CCL250i 3MP ME315L, ME351i, CCL316, CCL350i 5MP ME511L, ME551i2, ME551i2 s Note: Displays below 2MP can also be connected. What are the supported resolutions? See the table on page 9. Is it possible to use multiple gra
Inhaltszusammenfassung zur Seite Nr. 19
Can I install the display driver by overwriting? No. Make sure to uninstall an existing driver before updating it or when adding/ removing cards, or changing slots, and reinstall it. The new graphics card doesn't get recognized as new hardware. Check the followings: • The graphics card is not inserted all the way in the slot. • An older version of the display driver may have been installed. Uninstall the existing driver before installing the latest one. • A non-NVIDIA card may be confl ictin
Inhaltszusammenfassung zur Seite Nr. 20
5) If the following screen appears, select "No, not this time" and click "Next." 6) When the Hardware Installation screen appears, click "Continue Anyway." 7) On the following screen, select "Install from a list or specifi c location (Advanced)" and click "Next." 8) Click "Browse" and point to DriverCD/XP2K directory, and click "OK." 9) Click "Finish." In a multi-display setups, the follwoing steps repeat as many times as the number of displays connected. 10) If the same screen as in step 3 app
