Inhaltszusammenfassung zur Seite Nr. 1
SY-KT333 DRAGON Lite
Motherboard
Quick Start Guide
The SOYO CD Quick BIOS Hardware Introduction
Setup
Installation
Inhaltszusammenfassung zur Seite Nr. 2
SOYO™ SY-KT333 DRAGON Lite Motherboard TM ® AMD K7 Athlon & Duron processors VIA KT333 AGP/PCI Motherboard 100/133 MHz Front Side Bus supported ATX Form Factor Copyright © 2002 by SOYO Computer Inc. Trad emarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belo
Inhaltszusammenfassung zur Seite Nr. 3
SY-KT333 DRAGON Lite Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-KT333 DRAGON Lite motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new motherboard. This guide provides all users with the basic steps of motherboard setting and operation. For further information, please refer to the SY-KT333 DRAGON Lite motherboard User’s Manual that came with your motherboard. Unpacking When unpacking the motherboard, che
Inhaltszusammenfassung zur Seite Nr. 4
□ SY-KT333 DRAGON Lite Quick Start Guide SY-KT333 DRAGON Lite Motherboard Layout PS/2 KB PS/2 Mouse Connector Connector USB 1_2 COM 1 ATX Power COM 2 PRT LINE-OUT LINE-IN MIC IDE 1 IDE 2 GAME PORT AGP Slot H/W Audio FDC1 PCI Slot #1 14 PCI Slot #2 JP44 3 WOL VT8233A Header 1 PCI Slot #3 Super I/O PCI Slot #4 USB 2.0 CHIP 3V Lithium PCI Slot #5 JP5 Battery 13 (Optional) 13 1 14 2 SMCARDCN 4 Introduction
Inhaltszusammenfassung zur Seite Nr. 5
SY-KT333 DRAGON Lite Quick Start Guide Key Features ® Supports Socket A AMD K7 processors Supports suspend to RAM (STR) - Supports 200/266 MHz Front Side Bus Supports 5 sets of voltage monitoring Athlon /XP CPU (750MHz ~ 2100+) On-board hardware audio - Duron /Morgan CPU (650MHZ ~ 1.2GHz) Power failure resume Supports 200/266/333 DDR (Double Data Supports multiple-boot function Rate) module Smart Card Reader PC99, ACPI - Compliant with Personal Computer Smart Ultra
Inhaltszusammenfassung zur Seite Nr. 6
SY-KT333 DRAGON Lite Quick Start Guide 2 Installation 2 T o avoid damage to your motherboard, please follow these simple rules while handling this equipment: Before handling the motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the motherboard for damage. If any chip appears to be loose, press carefully
Inhaltszusammenfassung zur Seite Nr. 7
SY-KT333 DRAGON Lite Quick Start Guide We will now begin the installation process. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step 1- Assembling the motherboard to the case Step 2- Install the Central Processing Unit (CPU) Step 3- Install memory modules Step 4- Install expansion cards Step 5- Connect cables, case wires, and power supply Install the Motherboard Step 1. Assembling the motherboard to the case To avoid shorting
Inhaltszusammenfassung zur Seite Nr. 8
SY-KT333 DRAGON Lite Quick Start Guide Step 2. Install the CPU TM ® CPU Mount Procedure: T o mount the AMD K7 Athlon & Duron processor that you have purchased separately, follow these instructions. 1 1 2 3 4 1. Lift the socket handle up to a vertical position. 2. Align the blunt edge of the CPU with the matching pinhole edge on the socket. 3. Seat the processor in the socket completely and without forcing. 4. Then close the socket handle to secure the CPU in place. Remember to conne
Inhaltszusammenfassung zur Seite Nr. 9
SY-KT333 DRAGON Lite Quick Start Guide CPU Fan Installation Y our Socket A processor kit comes with a cooling fan. Mount the fan on the processor according to the instructions provided by the manufacturer. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore prolonging the life of your CPU. Note: Remember to connect the fan to the appropriate power source. CPU Fan Mount Procedure: T o prevent scratch or damage on the motherboard, please
Inhaltszusammenfassung zur Seite Nr. 10
SY-KT333 DRAGON Lite Quick Start Guide 3. Clip-on the second lock and please make sure not to damage/scratch the board. 2 4. The fans power connector should be connected to CPUFAN1. DIMM3 DIMM1 Note: If the fan is defective or power connector is not connected to CPUFAN1, the system will enable Fan Off Control function. See below for more information on FOC function. 10 Installation
Inhaltszusammenfassung zur Seite Nr. 11
SY-KT333 DRAGON Lite Quick Start Guide FOC (Fan-Off Control) The newly designed SOYO “FOC” is based on the concept of total protection for CPU, which is very different from currently seen on the market. The H/W control function is used to see a passive security system of monitoring and warning. S/W Simultaneous Signal Follow-ups techniques and Auto Power Off System are included to prevent all possible damage caused by the malfunctioning of the CPU fan. With the help of “O/S On Time Monitor
Inhaltszusammenfassung zur Seite Nr. 12
SY-KT333 DRAGON Lite Quick Start Guide Step 3. Configure Memory Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using unbuffered and non-ECC DIMM modules from 64MB to 1GB. On this motherboard, DRAM speed can be set independent from the CPU front side bus speed. Depending on the DRAM clock speed setting in the BIOS setup, appropriate memory modules must be used. For 100MHz DRAM speed, use PC1600 memory; for 133MHz DRAM speed, use PC2100 memory; for 1
Inhaltszusammenfassung zur Seite Nr. 13
SY-KT333 DRAGON Lite Quick Start Guide Connectors and Plug-ins Standard IrDA (Infrared Device Header):SIRCON Wake-On-LAN Header: JP44 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin1 Pin2 Pin3 VCC NC IRRX GND IRTX VCC NC CIRRX GND CIRTX 5V-SB GND MP_Wakeup SMCARDCN Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 Pin11 Pin12 Pin13 Pin14 VCC NC NC NC Scrfet RST CLK NC NC Scrio GND Scrpres NC NC USB3 USB4 Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10 Power Data(-) Data(+) GND
Inhaltszusammenfassung zur Seite Nr. 14
SY-KT333 DRAGON Lite Quick Start Guide CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory. 1. Put the jumper back to 1-2 to allow writing of new data into the CMOS memory. 2. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white cap. CMOS Clearing Retain CMOS Data Clear CMOS Data Short pin 2-3 for Short pin 1-2 to retain JP5 Setting at least 5 seco
Inhaltszusammenfassung zur Seite Nr. 15
SY-KT333 DRAGON Lite Quick Start Guide 3 Quick BIOS Setup 3 This motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings are software configurable with the BIOS [SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick setup in BIOS. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter
Inhaltszusammenfassung zur Seite Nr. 16
SY-KT333 DRAGON Lite Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will Auto Run only in Windows Base Operating System . Your SY-KT333 DRAGON Lite motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains a. The user's manual for your new motherboard -in PDF format, b. The drivers software available for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive If yo
Inhaltszusammenfassung zur Seite Nr. 17
SY-KT333 DRAGON Lite Quick Start Guide The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual
Inhaltszusammenfassung zur Seite Nr. 18
SY-KT333 DRAGON Lite Quick Start Guide driver revision: VIA 4 in 1 Driver Package for Win 9x/ME/NT/2k/XP C-MEDIA 4-channel onboard audio Driver/Application for Win 9x/ME/2000/NT/XP KT333 DRAGON Lite hardware monitor for Win 9x/ME/2000/NT/XP KT333 DRAGON Lite ITE SIM card reader driver for Win 9x/ME/2000/NT/XP(english) C-MEDIA 4-channel onboard audio Driver for NT4.0 Installation Cancel OK (Driver Installation Menu) A short description of all available drivers follows: VIA 4 in 1 Driver P
Inhaltszusammenfassung zur Seite Nr. 19
SY-KT333 DRAGON Lite Quick Start Guide C-MEDIA 4-channel Onboard Audio Driver/Application for Win 9x/ME/ 2000/NT/XP 1. The driver supports 2/4/6 speakers 3D positional audio. 2. The application is include CD Player/MIDI Player/MP3/Wave Player/Mixer with the control over your PC’s audio functions. KT333 DRAGON Lite hardware monitor for Win 9x/ME/2000/NT/XP Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monit
Inhaltszusammenfassung zur Seite Nr. 20
SY-KT333 DRAGON Lite Quick Start Guide 5 Audio Driver Installation 5 Audio Driver Installation for Windows 98/98se. After you have installed the audio driver, windows may prompt you to restart your computer. When your computer restarted it may look for windows driver from your Win98CD and ask you to insert your Win98/98se CD to your CD-drive. At this point you need to insert the Win98 CD to your CD-drive and type in D:\win98 (assuming your CD-Rom in driver D). Audio Driver Install
