Inhaltszusammenfassung zur Seite Nr. 1
SY-K7VMP
Motherboard
Quick Start Guide
The SOYO CD Quick BIOS Hardware Introduction
USB 2.0 Driver Audio Driver
Setup Installation
Installation Installation
Inhaltszusammenfassung zur Seite Nr. 2
SOYO™ 1. AGP cards running at 3.3V are not supported, only AGP cards running at 1.5V can be used in this mainboard. 2. Please read the user guide before proceeding with your installations. Serious damage may occur if the procedure is not followed properly. 3. If you have any problem getting your system to work, please follow the troubleshooting tips in your user guide. 4. For immediate Technical questions, please visit http://www.soyousa.com/support and http://www.soyousa.com/kb. 2
Inhaltszusammenfassung zur Seite Nr. 3
SOYO™ SY-K7VMP Motherboard ® TM AMD K7 Athlon & Duron processors VIA KM400 AGP/PCI Motherboard 100/133/166 MHz Front Side Bus supported ATX Form Factor Copyright © 2003 by SOYO Computer Inc. Trademarks: SOYO is a registered trademark of SOYO Computer Inc. All trademarks are properties of their owners. Product Rights: All names of the product and corporate mentioned in this publication are used for identification purposes only. The registered trademarks and copyrights belong to t
Inhaltszusammenfassung zur Seite Nr. 4
SY-K7VMP Quick Start Guide 1 Introduction 1 Congratulations on your purchase of the SY-K7VMP motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new motherboard. This guide provides all users with the basic steps of motherboard setting and operation. For further information, please refer to the SY-K7VMP motherboard User’s Manual that came with your motherboard. Unpacking When unpacking the motherboard, check for the following items: The
Inhaltszusammenfassung zur Seite Nr. 5
SY-K7VMP Quick Start Guide SY-K7VMP Layout PS/2 KB P PS S/2 M /2 Mo ou us se e Connector Connector ABR 12 USB 1/USB 2 COM A VGA out PRT LAN Connector ATX Power USBLAN MIC IN / Center & Bass out Audio out / Front out J30 IDE 1IDE 2 8 7 Audio in / Rear out 2 1 3 AC97 codec LAN Chip 1 3V Lithium AUXIN1 PCI Slot #1 Battery CDSPDO 1 9 1 1 CDIN1 PCI Slot #2 2 COM2 5 USB20_1 PCI Slot #3 10 I/O CHIP PCI Slot #4 JP5 VT6307 PCI Slot #5 2 6 10 6 10 FLP SIRCON 1 5 115 1 5 1 5 GAME1 FW1 FW2 5 Intr
Inhaltszusammenfassung zur Seite Nr. 6
SY-K7VMP Quick Start Guide Key Features CPU Supports AMD 462 pins Socket A processors : Athlon XP (Palomino/Thoroughbred/Barton) (200/266/333 MHz FSB) Duron/Morgan SOYO COMBO Setup CMOS setup menu for complete and easy changing of your CPU settings in CMOS setup, making jumpers obsolete. Chipset VIA® KM400/ 8235 Chipset VGA UniChrome™ 2D/3D Graphics with motion compensation Memory Supports PC2100 and PC2700 DDR (non-registered and non-ECC) memory modules. SOYO COMBO Setup men
Inhaltszusammenfassung zur Seite Nr. 7
SY-K7VMP Quick Start Guide Sound Onboard VIA VT1616 6 channel Audio Codec Network 10/100 MBps 100Base-T Ethernet controller, supporting Wake-On-Lan (WOL) BIOS Power Failure resume function to allow the system to turn on or off after a power failure, which is indispensable for server systems. Wake On Ring and Power On by Alarm to allow your system to wake up from suspend or power on through the modem or RTC alarm. Multiple boot, allowing your system to boot from for example CD-ROM
Inhaltszusammenfassung zur Seite Nr. 8
SY-K7VMP Quick Start Guide 2 Installation 2 To avoid damage to your motherboard, please follow these simple rules while handling this equipment: Before handling the motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. Remove the motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. Check the motherboard for damage. If any chip appears to be loose, press carefully to seat it f
Inhaltszusammenfassung zur Seite Nr. 9
SY-K7VMP Quick Start Guide Install the Motherboard We will now begin the installation process. Please follow the step-by-step procedure designed to lead you to a complete and correct installation. Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Connect cables, case wires, and power supply Step 1. Install the CPU TM TM TM ® CPU Mount Procedure: To mount the AMD K7 Athlon , Athlon XP & Duron processor that you hav
Inhaltszusammenfassung zur Seite Nr. 10
SY-K7VMP Quick Start Guide 5. Set the jumpers on the FJ1 jumper block to the correct FSB for your CPU. FJ1 100 MHz 133 MHz 166 MHz FSB Clock Select CPU Fan Installation Your Socket A processor kit comes with a cooling fan. Mount the fan on the processor according to the instructions provided by the manufacturer. The fan is a key component that will ensure system stability. The fan prevents overheating, therefore prolonging the life of your CPU. Note: Remember to connect the fan
Inhaltszusammenfassung zur Seite Nr. 11
SY-K7VMP Quick Start Guide 2. Carefully mount the fan on top of the CPU and clip-on the first lock. 1 3. Clip-on the second lock and please make sure not to damage/scratch the board. 2 11 Installation
Inhaltszusammenfassung zur Seite Nr. 12
SY-K7VMP Quick Start Guide 4. Connect the power connector to CPUFAN1. DIMM1 DIMM3 Note: If the fan is defective or Power connector is not connected to CPUFAN1, the system will enable Fan Off Control function. See below for more information on FOC function. When the CPU temperature exceeds, the temperature set in the CPU Temp. Protection in BIOS setup, SOYO’s Anti Burn Regulator (ABR) will automatically shutdown the system and beep until the power button is pressed for one time. F
Inhaltszusammenfassung zur Seite Nr. 13
SY-K7VMP Quick Start Guide “FOC” includes the following functions: Simultaneous Signal Follow Up: Before the system enters the O/S, H/W will detect the signals of the CPU fan pins, get their revolution information and send it to the BIOS. Auto Power Off System: If the BIOS receives the information of CPU fan revolution, it continues to function normally. If no signal is received, it will inform the system and disconnect the power supply immediately to protect the CPU from overheating. No
Inhaltszusammenfassung zur Seite Nr. 14
SY-K7VMP Quick Start Guide ABR (Anti Burn Regulator) SOYO's ABR (Anti Burn Regulator) is a specially designed hardware circuit that works hand in hand with the CPU’s internal sensor in monitoring the temperature of the CPU and prevent it from overheating. Once the heat accumulated in the CPU is over the set limit. ABR will automatically shut down the system power and warn you with a beeping sound. To de-activate the beeping sound, un-plug the AC power cord. We recommend you to check the
Inhaltszusammenfassung zur Seite Nr. 15
SY-K7VMP Quick Start Guide Step 3. Installation of Expansion Cards The motherboard has 1 AGP slot and 5 PCI slots. 1. Read the related expansion card’s instruction document before inserting the expansion card into the computer. 2. Press the expansion card firmly into expansion slot in the motherboard. 3. Make sure the metal contacts on the card are correctly seated in the slot. 4. Replace the screw to secure the slot bracket of the expansion card. 5. Install driver for the operating syst
Inhaltszusammenfassung zur Seite Nr. 16
SY-K7VMP Quick Start Guide USB20_1 Pin1 Pin2 Pin3 Pin4 Pin6 Pin7 Pin8 Pin9 Pin10 Power Data(-) Data(+) GND Power Data(-) Data(+) GND GND 1394: FW1 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 A0PC GND B0PC NC PWR0 A0MC CGND B0MC PWR0 CGND 1394: FW2 Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 Pin7 Pin8 Pin9 Pin10 A1PC GND B1PC NC PWR1 A1MC CGND B1MC PWR1 CGND CPU Cooling Fan: CPUFAN1 CPU Cooling Fan: CPUFAN2 Pin1 Pin2 Pin3 Pin1 Pin2 Pin3 GND 12V SENSOR GND 12V NC Chassis Fan: CHAFAN1 Chassis
Inhaltszusammenfassung zur Seite Nr. 17
SY-K7VMP Quick Start Guide CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory. 1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white cap can easily identify this jumper. 2. Put the jumper back to 1-2 to allow writing of new data into the CMOS memory. CMOS Clearing Clear CMOS Data Retain CMOS Data Short pin 2-3 for Short pin 1-2 to JP5 Setting at least 5 seconds to retain new setti
Inhaltszusammenfassung zur Seite Nr. 18
SY-K7VMP Quick Start Guide 3 Quick BIOS Setup 3 This motherboard allows you to change your memory and onboard peripheral settings in BIOS setup. After the hardware installation is complete, turn the power switch on, then press the key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be shown on the screen. Then, follow these steps to configure your system. Step 1. Select [STANDARD CMOS SETUP] Set [Date/Time] and [Floppy dri
Inhaltszusammenfassung zur Seite Nr. 19
SY-K7VMP Quick Start Guide 4 The SOYO CD 4 The SOYO-CD will Auto Run only in Windows Based Operating Systems. Your SY-K7VMP motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains a. The user's manual for your new motherboard in PDF format, b. The drivers software available for installation, and c. A database in HTML format with information on SOYO motherboards and other products. Step 1. Insert the SOYO CD into the CD-ROM drive If you are running Windows NT/2K
Inhaltszusammenfassung zur Seite Nr. 20
SY-K7VMP Quick Start Guide (SOYO CD Start Up Program Menu) Under Windows 95/98/ME, the SOYO CD Start Up Program automatically detects the SOYO motherboard the system uses and displays the corresponding model name. The user's manual files included on the SOYO CD are in PDF (Postscript Document format). In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is a
