Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
SPACEPC® 1232 SERIES
PC/104 SINGLE BOARD COMPUTER
(ALSO KNOWN AS THE CPU-1232)
5/18/2005
MNL-0501F-01
Inhaltszusammenfassung zur Seite Nr. 2
ABOUT THIS MANUAL This manual is meant for engineers and programmers who wish to use the Parvus SpacePC® 1232. It contains technical specifications, and describes the connectors and how to properly use and configure the product. NOTICE Although all the information contained herein has been carefully verified, Parvus Corporation assumes no responsibility for errors that might appear in this document, or for damage to property or persons resulting from an improper use of this manual and
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Table of Contents .......................................................................................................................... 3 Chapter 1 Product Overview .................................................................................................... 6 SpacePC 1232 Functional Block Diagram................................................................................... 7 Product Definition............................................................
Inhaltszusammenfassung zur Seite Nr. 4
J19 LCD-TFT Section ................................................................................................................ 36 Chapter 4 The Setup Program................................................................................................ 39 How to use the Setup program .................................................................................................. 40 The Setup pages..................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
5 A.3 Safety Summary.............................................................................................................. 81 Ground the Instrument ........................................................................................................ 81 Do Not Substitute Parts or Modify Equipment..................................................................... 82 Flammability .....................................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 1 Product Overview The SpacePC 1232 is a highly integrated PC/104 CPU module, based on the AMD / National Semiconductor Geode GX1 MMX Enhanced microprocessor. It is also known as the CPU-1232. Related Products: Development kit for SpacePC 1232 / multifunction adapter Cable set for SpacePC 1232 AC97-CODEC and USB adapter Parallel to Floppy adapter Ethernet RJ45 adapter For a complete list of our products please go to our web site: www.parvus.com In the fo
Inhaltszusammenfassung zur Seite Nr. 7
7 SpacePC 1232 Functional Block Diagram The figure below shows the functional blocks diagram of the module. CPU-1232 CPU-1232 Figure 1. Functional Module block diagram of the Ethernet 10/100 SDRAM Ethernet Adapter 2 x USB NS Fast Geode Gx1 Ethernet Processor Controller Speakers Line-out USB + LCD-TFT AC97 Codec CD-ROM Audio Adapter NS Geode CS5530A I/O Microphone VGA CRT Companion SSD SpacePC 1232 ISA Bus HDD/DOM Parallel / Floppy D D FDD Super I/O Adapter (SMC FD37B782)
Inhaltszusammenfassung zur Seite Nr. 8
Product Definition SpacePC 1232 PC/104 CPU Module PC/AT compatible. PC/104 Form Factor: 3.550” x 3.775” (90 X 96 mm); height: 15 mm (0.6”) Low power consumption. High reliability. Operating systems supported: DOS (from 3.0 to 6.22), QNX, VxWorks, PSOS, Windows 3.11, Windows 95, Windows 98, Windows NT, Windows 2000, Linux. AMD / NS Geode GX1 MMX Enhanced microprocessor 266MHz clock speed (300MHz version only available with a minimum quantity purchase) 1.8V core voltage pro
Inhaltszusammenfassung zur Seite Nr. 9
9 Two cascaded 8259 interrupt controllers (15 interrupt channels) Three 8254 counter/timers (There are no extra timers) Three extra timers Peripherals Two serial ports UART 16550A-compatible: one selectable between RS232/422/485 and one RS232 only One bidirectional parallel port: selectable between EPP, ECP, SPP One USB port compliant with the Open Host Controller Interface (OHCI) One AC97 port (CODEC board needed) One floppy disk interface available on the parallel port (J
Inhaltszusammenfassung zur Seite Nr. 10
Display resolutions up to 1280x1024 8-bit per pixel UMA (Unified Memory Architecture) LCD-TFT interface Also LCD-TFT flat panels can be connected to the SpacePC 1232 If LCD-TFT and CRT screens are used at the same time, the refresh frequency of the CRT video will be modified according to the LCD-TFT setting. It may be possible to view flickering on the CRT screen. 10
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 Jumper Description This chapter shows the jumpers layout and explains how to setup the jumpers. Jumper Layout and Configuration Figure below, shows the jumper layout of the SpacePC 1232 module. In the below figure, the jumpers are indicated as JP followed by the jumper's number, while pin 1 of every jumper is indicated by a red square pad. Figure 2. Jumpers and solder jumpers on the SpacePC 1232 module 11
Inhaltszusammenfassung zur Seite Nr. 12
The following jumpers are located on the module: One 3-pin jumper (JP5) for which there are only two possibilities: Connecting pin 1 to pin 2 (which will be indicated as 1-2) Connecting pin 2 to pin 3 (which will be indicated as 2-3) Three 2-pin jumpers (JP1, JP7, JP8), which can be set as follows: Pin 1 connected to pin 2 (which will be indicated as ‘Closed’) Pin 1 and pin 2 not connected (which will be indicated as ‘Open’) The following table provides a quick cross
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 3 Connectors Description This chapter provides a brief description of the SpacePC 1232 module’s connectors, with their positions and functions. Connectors Layout In the following figure are shown the connectors with their layout and function/s. J10 VGA AC97 Audio 2x USB JP10 IDE Led J11 Auxiliary NS Geode Power CS5530A J19 I/O J14 Companion PS/2 Mouse SSD J18 J1 J2 Ethernet NS Geode Gx1 U1 J16 Processor J6 Serial 2 J13 J17 J3 J4 J5 Multifunction Parallel Serial 1 Connector Por
Inhaltszusammenfassung zur Seite Nr. 14
Table below lists the name of the connectors with their function and the reference page. Table 2. Connector Functions Connector Function Page J1-J2 ISA BUS (PC/XT) 20 J3 Multifunction Connector 22 J4 Parallel Port / Floppy 26 J5 Serial Port 1 28 J6 Serial Port 2 28 J7 USB ports (A and B) 29 J8 AC97 Audio Interface Connector 30 J9 IDE/DOM 33 J10 VGA 34 J11 Auxiliary Power Supply 35 J13 Fan 36 J14 PS/2 Mouse 24 J16 Reserved - J17 Reserved - J18 Fast Ethernet 37
Inhaltszusammenfassung zur Seite Nr. 15
15 J1 and J2 for the ISA Bus The ISA BUS Connectors J1 and J2 carry the signals for the ISA Bus. These signals match definitions of the IEEE P996 standard. Below is shown a picture of the ISA BUS Figure 4. ISA BUS layout According to PC/104 specifications, KEYs are filled holes in the upper side and missing pins in the lower side of the bus connector. This is made to avoid the wrong insertion in/of another module. For further info about ISA (PC/104) bus, please refer to
Inhaltszusammenfassung zur Seite Nr. 16
8. Press evenly the module onto the PC/104 stack. The picture below shows a typical module stack with 2 PC/104 modules, 1 PC/104 16-BIT module, and 1 PC/104 8-BIT module. The maximum configuration for the PCI bus of PC/104 modules is 4 plus the Host Board. If standard PC/104 modules are used in the stack, they must be the top module(s) because they will normally not include the PCI bus. Stackthrough 8-bit module 0.435 in. (11 mm) 0.6 in. (15mm) Spacers (4 plcs.) 0.6 in. (15 mm)
Inhaltszusammenfassung zur Seite Nr. 17
17 J3 for Multifunction & J14 for Mouse J3 is a double row 5 x 2 pin with 2.54-mm step connector and allows the connection of a speaker, a keyboard, and a battery to the SpacePC 1232 module. J14 is a 4 pin with 2-mm step connector and allows the connection of a PS/2 compatible mouse. Later on there is a brief description about the Parvus Multifunction Adapter and the VGA and the Ethernet. J3 Multifunction Connector J3 Multifunction Connector Figure 6. J3 Connector layout
Inhaltszusammenfassung zur Seite Nr. 18
Below is shown the connector pinout: Table 3. Multifunction connector Pin Signal Function 1 SPKR- Speaker output 2 SPKR+ Speaker output (+5V) 3 RESET External reset 4 WDTL Watch dog timeout latch 5 KBD Keyboard data 6 KBC Keyboard clock 7 GND Ground signal 8 KBP Keyboard power (+5V) 9 BAT External Battery input 10 P_B External Power Button This section of the connector implements the following functions: Keyboard An AT compatible keyboard can be connected to the mo
Inhaltszusammenfassung zur Seite Nr. 19
19 The audio output is based on two signals: one come from the output of Timer 2, and the other come from I/O port 61h compliant with the AT Standard. Power button If the soft power management is enabled, a low signal in the pin10 turns the system on or off. J14 Mouse Connector A PS/2 compatible mouse can be connected to the J14 connector (4pins, 2-mm step). J14 PS/2 Mouse Figure 7. J14 Connector layout The J14 pin out is given below. Table 5. J14 for Mo
Inhaltszusammenfassung zur Seite Nr. 20
Parvus Multifunction Adapter Parvus Multifunction Adapter simplifies the connection of mouse and keyboard with two PS/2 connectors, providing also a speaker, a battery and a reset pushbutton. Battery Speaker J6 J1 J5 J4 To J14 Conn. To Multif. Conn. Not of CPU Board of CPU Board used (Mouse sign.) Power Led Spkr Led J3 J2 S1 Reset Mouse Keyboard Pushbutton Figure 8. Multifunction Adapter (both sides) 20
