Inhaltszusammenfassung zur Seite Nr. 1
MS9100, MS9200
HD Decoder Card
Installation Guide
Inhaltszusammenfassung zur Seite Nr. 2
HD DECODER CARD INSTALLATION GUIDE th June 30 , 2002 Copyright © 2001 Mediasonic All rights reserved No part of this documentation may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written permission of Mediasonic. The information in this documentation is supplied without warranty of any kind, either direct
Inhaltszusammenfassung zur Seite Nr. 3
HD Decoder Card Installation Guide Preface About This User Guide The manual is comprised of the following chapters: Chapter 1: Introduction Chapter 2: Installation Overview Chapter 4: Installing the HD Decoder Card Chapter 5: Installing Drivers Chapter 6: Installing MGI SoftDVD MAX Chapter 7: Installing the HD Server Application Chapter 8: “Regedit” A full contents list appears after this preface. Software Versions This manual applies to the MS9100 and 9200 HD decoder cards. MAN
Inhaltszusammenfassung zur Seite Nr. 4
HD Decoder Card Installation Guide Table of Contents Preface..................................................................................................... 1 About This User Guide.................................................................................................................................... 1 Software Versions ........................................................................................................................................... 1 Trademarks ..
Inhaltszusammenfassung zur Seite Nr. 5
HD Decoder Card Installation Guide Chapter 1: Introduction The MediaSonic MS9100 and MS9200 HD Decoder cards are PCI devices that when installed in a standard desktop Personal Computer will allow the user to display single channel analog (MS9100) or digital (MS9200) High Definition encoded program material. The cards decode MPEG MP@HL transport streams and output either SMPTE 296 or SMPTE 274 formats as defined by the ATSC (Advanced Television Standards Committee). A video p
Inhaltszusammenfassung zur Seite Nr. 6
HD Decoder Card Installation Guide Chapter 2: Installation Overview MS9100 HD Decoder Card MS9100 Package contents: 1. MS9100 HD Decoder Card with: Analog HD Video output/Black-burst/SPDIF/Timecode connectors 2. 26 pin ribbon cable 3. “Y” adaptor cable (2x RCA male to 1x 4 pin mini DIN) 4. Two female/female RCA adaptor connectors 5. CD-ROM (includes all software necessary for installation and operation of the HD Decoder Card, as well as a Video Test File) 6. HD Server Application Use
Inhaltszusammenfassung zur Seite Nr. 7
HD Decoder Card Installation Guide NOTE: These applications must be installed on computers running the Windows 2000 operating system. HD Decoder Card and Software: 1. SHUT DOWN the computer 2. Install the HD Decoder Card(s) 3. Install Software: • Drivers (Win2000 folder) • MGI Soft DVD MAX (MGI Folder) • HD Server Application 5 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 8
HD Decoder Card Installation Guide Chapter 3: Installing the HD Decoder Card Note 1: Observe precautions for handling static sensitive electronic components during installation of the HD Decoder Card. Note 2: Dedicate three adjacent PCI slots to the installation of the Decoder Card(s). This will ensure proper ventilation, and accommodate the required daughter cards (when using the MS9200). To install the MS9100 HD Decoder Card: 1. Remove the computer cover to gain access to the PCI c
Inhaltszusammenfassung zur Seite Nr. 9
HD Decoder Card Installation Guide To install the MS9200 HD Decoder Card (Rev. C) 1. Remove the computer cover to gain access to the PCI card slots 2. Remove the PCI slot covers in the card position(s). Put aside the screws for future use 3. Connect the Digital Card daughter card A to the main HD Card with the two (2) ribbon cables provided 4. Orient connectors CN6 and CN7 as shown in Figure 2, (red stripe marks pin 1) 5. Carefully install the HD Card, (and Daughter Card if needed) in t
Inhaltszusammenfassung zur Seite Nr. 10
HD Decoder Card Installation Guide To install the MS9200 HD Decoder Card (Rev. D) The Rev. D HD Card utilizes an additional daughter card (Daughter Card – B) as well as offering all of the features of the Rev. C card described above. 1. Remove the computer cover to gain access to the PCI card slots 2. Remove the PCI slot covers in the card position(s). Put aside the screws for future use 3. Connect the Daughter Card - A (see previous description, Figure 2), connector labels are different
Inhaltszusammenfassung zur Seite Nr. 11
HD Decoder Card Installation Guide Figure 3. MS9200 Rev.D Digital Decoder Card and Daughter Card B connections 9 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 12
HD Decoder Card Installation Guide MS9100 Interface Figure 4 show the interface connectors available for wiring the MS9100 Analog Decoder Card into your display system: IN/OUT HD CVBS SPDIF TIMECODE Figure 4. MS9100 Analog Decoder Card interface plan MS9200 Interface Figures 5-7 show the interface connectors available for wiring the MS9200 Digital Decoder Card/Daughter Card(s) into your display system: Figure 5. MS9200 Digital Decoder Card - Rev. C or Rev .D 10 Rev. 0.
Inhaltszusammenfassung zur Seite Nr. 13
HD Decoder Card Installation Guide Figure 6. MS9200 Daughter Card A - Rev. C or Rev. D COMPOSITE Y/C AUDIO Figure 7. MS9200 Daughter Card B - Rev. D only 11 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 14
HD Decoder Card Installation Guide Chapter 4: Installing Drivers The Found New Hardware Wizard Upon booting-up the computer will display the Found New Hardware Wizard dialog box: This dialog box provides the opportunity to install the drivers necessary for the correct functioning of the newly installed HD Decoder card. Click “Next” to get started. The Install Hardware Device Drivers dialog box appears: (Note: The actual contents of this display may vary depending upon the con
Inhaltszusammenfassung zur Seite Nr. 15
HD Decoder Card Installation Guide The Locate Driver Files dialog box The following picture shows the next dialog box: Make sure that the “Specify a location” box is checked. Click “Next” The following dialog box will appear: You are required to perform a search for the required data. Insert the CD provided with the HD Card and click “Browse” to navigate the CD.. Search CD ROM for: …/WIN2000/Janus2000 13 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 16
HD Decoder Card Installation Guide Select “MediaSonicHD2K” and click “Open” Click “OK”, to copy the drivers to the correct location on your computer. The Driver Files Search Results dialog box appears: 14 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 17
HD Decoder Card Installation Guide Click ”Next” The Digital Signature Not Found dialog box appears: Accept the default, by clicking clicking “Yes” After a few seconds The Found New Hardware Wizard will appear: 15 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 18
HD Decoder Card Installation Guide Click “Finish” The following prompt appears: Click “No” and proceed to the Installation of the MGI SoftDVD MAX program. 16 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 19
HD Decoder Card Installation Guide Chapter 5: Installing MGI SoftDVD MAX This software enables the audio features of the HD Decoder card. CD-ROM contents folder Locate the file “Setup.exe” in the MGI folder of the the CD-ROM: Double click “Setup.exe” then accept the license agreement terms by clicking “Yes” in the following dialog: 17 Rev. 0.0
Inhaltszusammenfassung zur Seite Nr. 20
HD Decoder Card Installation Guide The MGI SoftDVD MAX Setup dialog box appears. The MGI SoftDVD MAX dialog box To continue the installation, Click “Next” to proceed. 18 Rev. 0.0
