Inhaltszusammenfassung zur Seite Nr. 1
BEFORE OPERATION
AVANT DE COMMENCER
ANTES DE LA OPERACION
GV-DV1000
DV Capture Board
Video Navigator
PhotoSuite SE
VideoWorks
LYT0272-001A
CASTELLANO ENGLISHFRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
JVC SOFTWARE LICENSE AGREEMENT 2 EN IMPORTANT TO CUSTOMERS: MAKE SURE TO READ THIS CAREFULLY BEFORE OPENING THE SEALED SOFTWARE PACKETS Thank you for purchasing our product. In order to start using the software program en- closed, you are required to accept the terms and conditions of the agreement as provided below. Software License Agreement This is a legal agreement between you (either an individual or an entity) and Victor Company of Japan, Limited (JVC). By opening the sealed software packa
Inhaltszusammenfassung zur Seite Nr. 3
EN 3 5. LIMITED WARRANTY JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM, etc.) are free from any defects in materials and workmanship for a period of thirty (30) days from the date of your purchase and that any hardware accompanying the Program is also free from defects to the extent provided in the attached Warranty Form. JVC’s entire liability and your exclusive remedy in conneciotn with the Program shall be, at JVC’s option, either (a) return of the pr
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS 4 EN JVC SOFTWARE LICENSE AGREEMENT 2 TECHNICAL SUPPORT FOR REGISTERED USER 5 User Registration Method......................................................... 5 NOTICE FOR USERS 7 INSTALLING DV CAPTURE BOARD 8 INSTALLING DV CAPTURE DRIVERS 10 ® For WINDOWS 98............................................................... 10 ® For WINDOWS 95 VERSION 4.00.950B or later ........................ 12 ® For WINDOWS 95 VERSION 4.00.950 or 4.00.950A .................. 14 CONNECTING AND TROUBLES
Inhaltszusammenfassung zur Seite Nr. 5
TECHNICAL SUPPORT FOR REGISTERED USER EN 5 TECHNICAL SUPPORT FOR REGISTERED USER To enable the technical support of each company, perform the user registration according the below table. User Registration Method Product Name Support company Registration Method Remarks Video Navigator JVC Not required. See JVC Software License Agreement. (p. 2) Adaptec MGI Mail the MGI See Adaptec DV Capture Board software user Software License registration post Agreement. (attached card. sheet) For repair of the
Inhaltszusammenfassung zur Seite Nr. 6
TECHNICAL SUPPORT FOR REGISTERED USER (cont.) 6 EN JVC Support for: NewSoft Support for: Phone: 1-800-252-5722 (only in U.S.A) North America(U.S.A) Technical Support Hotline: Adaptec and MGI Support for: Please e-mail: tech@newsoftinc.com or North America (Canada) call (510) 445-8616 Address: MGI Software Corp. www.newsoftinc.com 40 West Wilmot Street Europe Richmond Hill, Ontario UK L48 1H8 The Software Centre Canada East Way Phone: 1-905-764-7291 East Mill Industrial Estate e-mail: support@m
Inhaltszusammenfassung zur Seite Nr. 7
NOTICE FOR USERS EN 7 When contacting the technical support centers (p. 6) about this software, please fill out the following and have the appropriate information ready. Name of Software Product Version of Software Model CPU PC OS Memory MB Available Hard Disk Space MB Please note that it may take some time to respond to your questions, depending on their subject matter.
Inhaltszusammenfassung zur Seite Nr. 8
INSTALLING DV CAPTURE BOARD 8 EN To install the DV Capture Board (AHA-8920 IEEE Host Adapter) in your computer so you can connect IEEE 1394 devices to your system, follow these steps: Discharge any static electricity build-up 1 before handing the DV Capture Board by touching a grounded metal object (like the exposed metal parts on the back of your computer). Turn OFF the power of the computer and 2 disconnect the power cord. Remove the cover from the computer. 3 (Refer to your computer’s manual.
Inhaltszusammenfassung zur Seite Nr. 9
EN 9 Remove the DV Capture Board from its 5 antistatic packaging. Always handle the card by its edges. IEEE 1394 DV Capture Board Carefully insert the DV Capture Board 6 into the PCI expansion slot until it is firmly seated, then replace the slot cover screw. Replace your computer cover. The 7 driver program (IEEE 1394 software) for the DV Capture Board must be installed on your computer before you can use the JVC Video Navigator. Caution •Computers may have vertical or horizontal PCI expansion
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLING DV CAPTURE DRIVERS 10 EN Caution ® • In case the DV Capture Board has been installed with Windows 95, these steps are not required. ® FOR WINDOWS 98 Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (see p. 8). Follow these steps to install the drivers. If you make a mistake during the install procedure, click the Back button and correct the mistake. Turn on your computer. Put the included
Inhaltszusammenfassung zur Seite Nr. 11
EN 11 Make sure only the CD-ROM drive is 4 selected. Then click the Next button. Make sure The updated driver 5 (Recommended) Adaptec AHA- 8920 Host Adapter is selected. Then click the Next button. Click the Next button. 6 Click the Finish button. 7 Restart your computer. 8
Inhaltszusammenfassung zur Seite Nr. 12
INSTALLING DV CAPTURE DRIVERS (cont.) 12 EN ® Before installing, confirm your Windows 95 version. Double-click the system icon in the Control Panel and select General tab. ® FOR WINDOWS 95 VERSION 4.00.950B OR LATER Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install the drivers: Turn on your computer. Put the included 1 JVC CD-ROM in your CD-ROM drive. The Ne
Inhaltszusammenfassung zur Seite Nr. 13
EN 13 The Insert Disk window is displayed. 4 Click the OK button. If you know the drive letter for your CD- 5 ROM drive enter it in the box below Copy files from: and go to step 7. If you do not know the drive letter for your CD-ROM drive continue with the next step. In the Open window click the arrow 6 below Drives: and select your CD-ROM drive. Click wn1394.inf in the file list. Then click the OK button. In the Copying Files... window click the 7 OK button. Restart your computer. 8
Inhaltszusammenfassung zur Seite Nr. 14
INSTALLING DV CAPTURE DRIVERS (cont.) 14 EN ® FOR WINDOWS 95 VERSION 4.00.950 OR 4.00.950A Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install the drivers: Turn on your computer. Put the included 1 JVC CD-ROM in your CD-ROM drive. The New Hardware Found Window is displayed. The New Hardware Found Window is displayed. In the New Hardware Found Window 2 select D
Inhaltszusammenfassung zur Seite Nr. 15
EN 15 In the Open window click the arrow 4 below Drives: and select your CD-ROM drive. Click wn1394.inf in the file list. Then click the OK button. In the Install From Disk window click 5 the OK botton. After the installation is complete we 6 recommend you restart your computer.
Inhaltszusammenfassung zur Seite Nr. 16
CONNECTING AND TROUBLESHOOTING 16 EN CONNECTING DV DEVICE Plug the included DV cable’s larger 1 connector into the socket on the DV Capture Board. • Confirm that the connector is securely plugged in. Plug the DV cable’s smaller connector 2 into the camcorder’s DV OUT/IN socket. • Confirm that the connector is securely plugged in. • Refer to your camcorders’s instruction book to locate the camcorder’s DV OUT/IN socket. DV IN/OUT
Inhaltszusammenfassung zur Seite Nr. 17
EN 17 TROUBLESHOOTING FOR DV CAPTURE BOARD If you are experiencing problems when using DV Capture Board, check the following items: • The DV Capture Drivers are not installed. • The PCI expansion slot must be a 5V bus master PCI expansion slot. Refer to your computer’s manual and seat the DV Capture Board in the PCI expansion slot firmly. ® FOR WINDOWS 98 (P. 10~11) • If the drivers did not install properly then use the following procedure: 1. Double-click the System icon in the Control Panel. 2
Inhaltszusammenfassung zur Seite Nr. 18
INSTALLING VIDEO NAVIGATOR 18 EN DirectX ® ® About Windows 95 basic operation, refer to the instructions of Windows 95 or your compu- ter. PREPARATION Start Windows. 1 Close all open windows and toolbars. Close any icons shown on the task bar. 2 Confirm that programs are not displayed on the task bar. 3 INSTALLING VIDEO NAVIGATOR Insert the included CD-ROM into the 1 CD-ROM drive. Click Start menu and select Run. 2 Click Browse button in the Run window. 3 In Browse window, select the Setup.exe i
Inhaltszusammenfassung zur Seite Nr. 19
STARTING UP VIDEO NAVIGATOR EN 19 PREPARATION Insert your video cassette to your DV 1 device. Connect the DV cable to your computer 2 and your digital camcorder. (See the separate booklet of DV Video Navigator, p. 8) Set your digital camcorder to Play mode. 3 Turn on your computer and start up ® 4 Windows 95. Click Start on the task bar. 5 Select Program and VideoNavigator 1.0 6 and click VideoNavigator 1.0. Then Video Navigator will start up. MEMO • Close all open windows and toolbars. Close an
Inhaltszusammenfassung zur Seite Nr. 20
INSTALLING PHOTOSUITE SE 20 EN Using MGI PhotoSuite Starter Edition (SE), you can transform or enhance the pictures you take by altering colors, making collages, and more. Put your photos into posters, calendars and greeting cards. You’ll see your photos in a whole new light. Put your photos into a picture frame or a screen saver, or into a school science report, or wherever you’d like them to be. Surprise yourself, impress your friends, and create your own exciting new photo collection! INSTALL
