Inhaltszusammenfassung zur Seite Nr. 1
XP-M5S661GX
® ®
Intel Pentium 4 LGA775 Processor Motherboard
User's Manual
12MM-M5S661GX-1002R
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Declaration © 2005 Gigatrend Technology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend Technology. Companies and product names mentioned in this document are trademarks or registered trademarks of their respective owners. Legal Disclaimer The information and content of this document is provided "as is", without warranty of any kind, express or implied, inc
Inhaltszusammenfassung zur Seite Nr. 3
Contents Motherboard Layout ......................................................................... 4 1. Product Introduction .................................................................. 5 1.1. Feature Summary ............................................................................. 5 1.2. I/O Back Panel and Connectors & Jumper Setting ......................... 6 1.2.1. I/O Back Panel ....................................................................................... 6 1.2.2. Con
Inhaltszusammenfassung zur Seite Nr. 4
Motherboard Layout KB_MS ATX_12V ATX FDD CPU_FAN LGA 775 R_USB SiS 661GX F_AUDIO AUDIO AGP ICS1883 IDE2 IDE1 PCI1 CLR_CMOS IT8705AF PCI2 SiS 964 SATA1 BIOS BATTERY PCI3 CODEC SATA0 F_PANEL PWR_LED CD_IN SUR_CEN F_USB1 F_USB2 4 English VGA USB COMA LAN LPT XP-M5S661GX DDR1 DDR2 SYS_FAN
Inhaltszusammenfassung zur Seite Nr. 5
English 1. Product Introduction The user manual provides steps related to quick installation. If you wish to view complete product information, please select the " ", Open User Manual button located on the driver CD or link to our website at http://www.axper.com to received the most up-to-date information. 1.1. Feature Summary ® ® CPU LGA775 for Intel Pentium 4 Processor ® ® Intel Pentium 4 533MHz FSB L2 cache depends on CPU ® Chipset North Bridge: SiS 661GX ® South Bridge: SiS 964 Memory 2 184
Inhaltszusammenfassung zur Seite Nr. 6
1.2. I/O Back Panel and Connectors & Jumper Setting 1.2.1. I/O Back Panel PS/2 Parallel Port LAN Mouse Line In USB Line Out Mic In PS/2 COMA VGA USB Keyboard PS/2 Keyboard Connects PS/2 standard keyboard and PS/2 standard PS/2 Mouse connector mouse Parallel port (LPT) Connects to printer COMA (Serial port) Connects to serial-based mouse or data processing devices VGA Port Connects to 15-pin D-Sub device such as a monitor USB Prior to use, please make sure that your system as well (Universal Seri
Inhaltszusammenfassung zur Seite Nr. 7
English CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN) power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler
Inhaltszusammenfassung zur Seite Nr. 8
PWR_LED Connects to the system power LED indicator whereby the power is indicated as ON or OFF. However, the indicator will flash when the system is suspended. PIN SIGNAL 1 MPD+ 2 MPD- 1 3 MPD- CLR_CMOS (Clear CMOS) You can clear the motherboard CMOS with the jumper to return your system to its initial status. To prevent improper usage, the jumper does not include the jumper plug. If you wish to use the Clear CMOS function, please short circuit the 1-2Pin. Short : Clear CMOS Open : Normal 1 1 F_
Inhaltszusammenfassung zur Seite Nr. 9
English BATTERY The improper removal of the battery can result in harm. When replacing a battery, please make sure you use one that is of similar brand and model number. For information related to battery specifications and precautions, please refer to the manufacturer instructions. If you wish to delete the data stored in the CMOS, please follow the steps below: 1. Please turn off your computer and unplug the power. 2. Remove the battery from the motherboard. 3. Wait 10 minutes and then replac
Inhaltszusammenfassung zur Seite Nr. 10
2.1. Installation of a LGA775 Pentium 4 CPU and Fan Sink 2.1.1. Installation of a LGA775 CPU 1. Push the socket lever arm down and away from the CPU socket and raise it up completely. 2. Open the load plate and gently remove the plastic cover. 3. Hold the CPU with your thumb and index fingers (do not touch the bottom of the CPU when holding it). Align notchs on the two sides of the CPU with the small sockets of the CPU socket and place the CPU straight down. 4. Make sure the CPU is properly inst
Inhaltszusammenfassung zur Seite Nr. 11
English 2.1.2. Installation of Fan Sink 1. Apply a thin coating of thermal paste to complete cover the surface of the CPU. 2. Align the four fasteners of the fan sink with the four holes around the CPU socket. Push down each fas- tener and you should hear a "click" when the fastener is attached. Make sure the four fasteners are attached securely. Prior to installation of the fan sink, check the direction of each fastener by the arrow engraved on fastener top. Before attaching the fasteners, turn
Inhaltszusammenfassung zur Seite Nr. 12
2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage. 2. Please make sure that the memory used is supported by the motherboard. 3. Memory modules have a foolproof insertion design. The memory can be installed only when facing the correct position. If you cannot insert the module, please switch directions. 4. It is recommended that memory of similar capacity, specifications and brand be used. The m
Inhaltszusammenfassung zur Seite Nr. 13
English 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation as well as examining the CMOS. Its CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features. The CMOS SETUP saves each item configuration in the CMOS SRAM of the motherboard. When the power is turned off, the battery on the motherboard supplies the required power to the CMOS SRAM.
Inhaltszusammenfassung zur Seite Nr. 14
5. Installation of SATA RAID Disks The Serial ATA channel controlled by the SiS 964 southbridge chip supports RAID 0 and RAID 1. This section explains the steps required to configure RAID disks. RAID (Redundant Array of Independent Disks) is a method of combining two hard disk drives into one logical unit. The advantage of an Array is to provide better performance or data fault tolerance. Hard disk drives can be combined together through a few different methods. The different methods are referre
Inhaltszusammenfassung zur Seite Nr. 15
English 5.3. Creating RAID 1 1. Upon re-boot, you will see the RAID software prompting you to press CTRL+S keys to enter the SiS RAID BIOS Setting Utility. Press CTRL+S. 2. In the SiS RAID BIOS Setting Utility, press to enter the RAID Setup utility. 3. In the RAID Setup window, press to create RAID volume. Then, use number keys 1~3 to select a RAID type. Press 3 to select RAID 1 and then press 4. Use <1> or <2> key to select Auto Create or Manual Create. Manual Create allows you
Inhaltszusammenfassung zur Seite Nr. 16
16 English
