Inhaltszusammenfassung zur Seite Nr. 1
IB868
®
Intel Pentium M PICMG 1.3
SHB Express CPU Card
USER’S MANUAL
Version 1.0
Inhaltszusammenfassung zur Seite Nr. 2
Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium M are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Winbond is a registered trademark of Winbond Electronics Corporation. All other product names or trademarks are properties of their respective owners. ii IB868 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Introduction ....................................................... 1 Product Description ..........................................................1 Checklist...........................................................................2 Specifications....................................................................3 Board Dimensions.............................................................4 Installations ....................................................... 5
Inhaltszusammenfassung zur Seite Nr. 4
This page is intentionally left blank. iv IB868 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION Introduction Product Description The IB868 PICMG1.3 SHB board incorporates the Mobile Intel® 915GM Express Chipset for Embedded Computing, consisting of the Intel® 915GM Graphic Memory Controller Hub (GMCH) and Intel® I/O Controller Hub 6-M (ICH6-M), is an optimized integrated graphics solution with a 400 MHz and 533 MHz front-side bus. The integrated 32-bit 3D graphics engine, based on Intel® Graphics Media Accelerator 900 (Intel® GMA 900) architecture, operates at
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Checklist Your IB868 Pentium M CPU card package should include the items listed below: · The IB868 CPU Card · This User’s Manual · 1 IDE Ribbon Cable · 1 Floppy Ribbon Connector · SATA Power Cord · SATA Cable · 2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a Mounting Bracket · 1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse · 1 CD containing the following: · Chipset Drivers · Flash Memory Utility · Optional audio cable with bracket (Audio8K)
Inhaltszusammenfassung zur Seite Nr. 7
INTRODUCTION Specifications Product Name IB868 Form Factor PICMG 1.3 SHB Express full size CPU card CPU Type Intel Pentium M / Celeron M CPU Voltage 0.700V ~ 1.708V System Speed Up to 2.26GHz CPU FSB 400/533MHz FSB Cache 2MB (Pentium M)/ 512KB(Celeron M) Level2 (CPU integrated) Green /APM APM1.2 CPU Socket Socket 479 or micro-FCBGA on board Chipset INTEL 915GM Chipset GMCH: 915GM 1257-pin FCBGA ICH6M: 82801FBM 609-pin mBGA FWH BIOS Award BIOS, support ACPI Functio
Inhaltszusammenfassung zur Seite Nr. 8
INTRODUCTION Board Dimensions 4 IB868 User’s Manual
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB868 in order to set up a workable system. The topics covered are: Installing the CPU ............................................................................6 Installing the Memory.......................................................................7 Setting the Jumpers...........................................................................8 Connectors on IB868 .....
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATIONS Installing the CPU ® The IB868 board supports a Socket 479 processor socket for Intel ® ® Pentium M or Celeron M processors. The processor socket comes with a screw to secure the processor. As shown in the left picture below, loosen the screw first before inserting the processor. Place the processor into the socket by making sure the notch on the corner of the CPU corresponds with the notch on the inside of the socket. Once the processor has slide into the socket, fas
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLATIONS Installing the Memory The IB868 board supports two DDR2 memory socket for a maximum total memory of 2GB in DDR2 memory type. Installing and Removing Memory Modules To install the DDR2 modules, locate the memory slot on the board and perform the following steps: 1. Hold the DDR2 module so that the key of the DDR2 module align with those on the memory slot. 2. Gently push the DDR2 module in an upright position until the clips of the slot close to hold the DDR2 module i
Inhaltszusammenfassung zur Seite Nr. 12
INSTALLATIONS Setting the Jumpers Jumpers are used on IB868 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB868 and their respective functions. Jumper Locations on IB868 ...............................................................9 JP2: Panel Voltage Setting ...............................................................10
Inhaltszusammenfassung zur Seite Nr. 13
INSTALLATIONS Jumper Locations on IB868 Jumpers on IB868......................................................................... Page JP2: Panel Voltage Setting ...............................................................10 JP3: Clear CMOS Contents..............................................................10 JP5: VGA Signal Select....................................................................10 JP6: CPU Front Side Bus Frequency Setting ..................................10
Inhaltszusammenfassung zur Seite Nr. 14
INSTALLATIONS JP2: Panel Voltage Setting JP2 Setting Panel Voltage Pin 1-2 3.3V Short/Closed Pin 2-3 5V Short/Closed JP3: Clear CMOS Contents Note that the ATX-power connector should be disconnected from the CPU card before clearing CMOS. JP3 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP5: VGA Signal Select Use these 2-pin header to select the on board 915GM integrated VGA or from the backplane P
Inhaltszusammenfassung zur Seite Nr. 15
INSTALLATIONS [ Connectors on IB868 The connectors on IB868 allows you to connect external devices such as keyboard, floppy disk drives, hard disk drives, printers, etc. The following table lists the connectors on IB868 and their respective functions. IDE1, IDE2: EIDE Connectors........................................................13 FDD1: Floppy Drive Connector ......................................................13 CN1, CN2: Serial ATA (SATA) Connectors.......................
Inhaltszusammenfassung zur Seite Nr. 16
INSTALLATIONS Jumper Locations on IB868 Connectors on IB868.................................................................... Page IDE1, IDE2: EIDE Connectors........................................................13 FDD1: Floppy Drive Connector ......................................................13 CN1, CN2: Serial ATA (SATA) Connectors...................................14 FAN1: CPU Fan Power Connector .................................................14 FAN2, FAN3: System Fan
Inhaltszusammenfassung zur Seite Nr. 17
INSTALLATIONS IDE1, IDE2: EIDE Connectors Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host data 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host data 11 Host data 3 11 12 Host data 12 Host data 2 13 14 Host data 13 Host data 1 15 16 Host data 14 Host data 0 17 18 Host data 15 Ground 19 20 Protect pin DRQ0 21 22 Ground Host IOW 23 24 Ground Host IOR 25 26 Ground IOCHRDY 27 28 Host ALE DACK0 29 30 Ground IRQ14 31 32
Inhaltszusammenfassung zur Seite Nr. 18
INSTALLATIONS CN1, CN2: Serial ATA (SATA) Connectors The SATA connectors support serial ATA 150. Each connector can only use one serial ATA hard disk. CN2 is port 1 and CN1 is port 2. FAN1: CPU Fan Power Connector FAN1 is a 3-pin header for the CPU fan. The fan must be a 12V fan. Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection FAN2, FAN3: System Fan Power Connector FAN2 and FAN3 are 3-pin headers for system fans. The fan must be a 12V
Inhaltszusammenfassung zur Seite Nr. 19
INSTALLATIONS J2: System Function Connector J2 provides connectors for system indicators that provide light indication of the computer activities and switches to change the computer status. J2 is a 20-pin header that provides interfaces for the following functions. Hard Disk Drive LED Reset Switch Not Defined ATX Power On Switch Not Defined Power LED Speaker Speaker: Pins 1 - 4 Pin # Signal Name 1 Speaker out 2 No connect 3 Ground 4 +5V Power LED: P
Inhaltszusammenfassung zur Seite Nr. 20
INSTALLATIONS Reset Switch: Pins 9 and 19 The reset switch allows the user to reset the system without turning the main power switch off and then on again. Orientation is not required when making a connection to this header. Hard Disk Drive LED Connector: Pins 10 and 20 This connector connects to the hard drive activity LED on control panel. This LED will flash when the HDD is being accessed. Pin # Signal Name 10 HDD Active 20 5V J4, J5: LVDS Connectors (2nd c
