Inhaltszusammenfassung zur Seite Nr. 1
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix
AW8D
Motherboard
Intel Pentium 4
Socket 775
User’s Manual
LGA775 ATX Motherboard
NB: Intel 975X Chipset
SB: Intel ICH7R Chipset
1066MHz FSB
Dual DDR2 800 DIMM Slots
Dual PCI-E X16 Graphics Slots
Dual GbE LAN
IEEE 1394
6x SATA 3Gb/s
About this Manual:
This user’s manual contains all the information you may
7.1 Channel HD Audio
need for setting up this motherboard. To read the user’s
Inhaltszusammenfassung zur Seite Nr. 2
AW8D User’s Manual st English, 1 Edition March 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix Contents 1. Introduction..................................................................... 1-1 1.1 Features & Specifications .............................................................1-1 1.2 Motherboard Layout.....................................................................1-3 2. Hardware Setup ............................................................... 2-1 2.1 Choosing a Computer Chassis...............
Inhaltszusammenfassung zur Seite Nr. 4
3.4 Advanced Chipset Features.........................................................3-18 3.5 Integrated Peripherals................................................................3-20 3.6 Power Management Setup..........................................................3-24 3.7 PnP/PCI Configurations ..............................................................3-27 3.8 Load Fail-Safe Defaults ..............................................................3-28 3.9 Load Optimized Defaults .
Inhaltszusammenfassung zur Seite Nr. 5
Introduction 1. Introduction 1.1 Features & Specifications CPU ® Designed for Intel Pentium 4 LGA775 processor with 1066/800 MHz FSB ® ® Supports Intel Pentium Processor Extreme Edition & Intel Pentium D Processor ® Supports Enhanced Intel Speedstep Technology (EIST) ® Supports Intel Extended Memory 64 Technology (EM64T) ® Supports Intel Virtualization Technology ® Supports Intel Execute Disable Bit capability ® Supports Intel Hyper-Threading Technology Chipset ® N
Inhaltszusammenfassung zur Seite Nr. 6
Expansion Slots 2x PCI-E X16 slots 2x PCI-E X1 slots 1x PCI slot 1x AudioMAX slot Internal I/O Connectors 1x Floppy port 1x UDMA 100/66/33 connector 6x SATA connectors 2x USB 2.0 headers 1x IEEE1394 header Rear Panel I/O ™ ABIT Silent OTES 1x PS/2 Keyboard connector 1x PS/2 Mouse connector 1x IEEE1394 connector 4x USB 2.0 connectors 2x RJ-45 Gigabit LAN connectors Miscellaneous ATX form factor (305mm x 245mm) ※ Specifications and informatio
Inhaltszusammenfassung zur Seite Nr. 7
Introduction 1.2 Motherboard Layout AW8D 1-3
Inhaltszusammenfassung zur Seite Nr. 8
1-4 AW8D
Inhaltszusammenfassung zur Seite Nr. 9
Hardware Setup 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your computer system. ※ Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. Failing to so may cause severe damage to your motherboard and/or peripherals. Plug in the AC power cord only after you have carefully checked everything. 2.1 Choosing a Computer Chassis This motherboard carries an AT
Inhaltszusammenfassung zur Seite Nr. 10
To install this motherboard: 1. Locate all the screw holes on the motherboard and the chassis base. 2. Place all the studs or spacers needed on the chassis base and have them tightened. 3. Face the motherboard’s I/O ports toward the chassis’s rear panel. 4. Line up all the motherboard’s screw holes with those studs or spacers on the chassis. 5. Install the motherboard with screws and have them tightened. ※ To prevent shorting the PCB circuit, please REMOVE the metal studs or spacer
Inhaltszusammenfassung zur Seite Nr. 11
Hardware Setup 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted, (b) you forgot the supervisor or user password preset in the BIOS menu, (c) you are unable to boot-up the system because the CPU ratio/clock was incorrectly set in the BIOS menu. This header uses a jumper cap to clear the CMOS memory and have it reconfigured to the default values stored in BIOS. Pins 1 and 2 shorted (default): Normal o
Inhaltszusammenfassung zur Seite Nr. 12
CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED” or “CMOS checksum error” displays on monitor, this backup battery is no longer functional and has to be renewed. To renew the backup battery: 1. Power off the system and disconnect with AC power source. 2. Re
Inhaltszusammenfassung zur Seite Nr. 13
Hardware Setup 2.3.2 Wake-up Header These headers use a jumper cap to enable/disable the wake-up function. USB-PWR1: Pin 1-2 shorted (default): Disable wake-up function support at USB1 port. Pin 2-3 shorted: Enable wake-up function support at USB1 port. USB-PWR2: Pin 1-2 shorted (default): Disable wake-up function support at USB2 port. Pin 2-3 shorted: Enable wake-up function support at USB2 port AW8D 2-5
Inhaltszusammenfassung zur Seite Nr. 14
2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connected to this 24-pin connector. Connect from pin-1 for either type. However, a 20-pin power supply may cause the system unstable or even un
Inhaltszusammenfassung zur Seite Nr. 15
Hardware Setup 2.4.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.
Inhaltszusammenfassung zur Seite Nr. 16
2.4.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CPUFAN1: CPU Fan Power Connector NBFAN1: Chipset Fan Power Connector SYSFAN1: System Fan Power Connector AUXFAN1~5: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 2-8 AW8D
Inhaltszusammenfassung zur Seite Nr. 17
Hardware Setup 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ In order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch the contact pins with fingers or any object. 3. Always put on the cap when the CPU is not in use. 2.5.1 CPU Socket 775 1. Place the board so
Inhaltszusammenfassung zur Seite Nr. 18
4. Visually inspect if the CPU is seated well into the socket. The alignment key must be located in the notch of package. 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. ※ The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever while gently pressing down the load plate. 7. Secure the lever wi
Inhaltszusammenfassung zur Seite Nr. 19
Hardware Setup 8. Place the heatsink and fan assembly onto the socket. Align the four fasteners toward the four mounting holes on the motherboard. 9. Press each of the four fasteners down into the mounting holes. Rotate the fastener clock-wise to lock the heatsink and fan assembly into position. 10. Attach the four-pin power plug from the heatsink and fan assembly to the CPU FAN connector. ※ The installation procedures vary with different types of CPU fan-and-heatsink ass
Inhaltszusammenfassung zur Seite Nr. 20
2.5.2 DDR2 Memory Slots This motherboard provides four 240-pin DIMM slots for Dual Channel DDR2 800/667/533 memory modules with memory expansion size up to 8GB. To reach the optimum performance in dual-channel configurations, install identical DDR2 DIMM pairs for each channel. Install DIMMs with the same CAS latency. To reach the optimum compatibility, obtain memory modules from the same vendor. Due to chipset resource allocation, the system may detect less than 4GB of system
