Inhaltszusammenfassung zur Seite Nr. 1
Installing the WinTV driver and WinTV
v7 application
Install your WinTV products. Turn on your Windows XP, Vista or Windows 7 based
PC, and boot into Windows.
For Windows XP installations:
After you install your WinTV device and
boot Windows, a 'Found New Hardware'
wizard will appear.
Please cancel it and allow Windows to
load fully before proceeding. With
some WinTV products, you might see this
message two or three times. Please click
‘Cancel’ each time you see the New
Hardware Wizard.
Insert
Inhaltszusammenfassung zur Seite Nr. 2
A blue screen will open and begin installing the drivers for your WinTV. Once the drivers have installed, a message will appear saying ‘Drivers have been updated successfully’. Click on the bar to exit. You do not need to reboot your PC until after Step 2 ote: the latest driver updates are available at: Nwww.hauppauge.com in the Support section. Step 2: Install the WinTV applications Click the button labeled Step 2: Install WinTV The setup application will then open and begin automatically in
Inhaltszusammenfassung zur Seite Nr. 3
Digital QAM and Analog TV. You cannot chose both Digital ATSC and Digital QAM. ote: If you’d like to use the A/V inputs, please see instructions below Nin External audio/video sources. If your TV source is ATSC digital over-the-air TV Select Digital ATSC and click Next. In the ATSC Setup menu, click Next. You will see the Digital ATSC Scan scanning for digital over-the-air channels. The digital TV scanning process will scan from chan- nels 2 to 51. As TV chan- nels are found, they will appear
Inhaltszusammenfassung zur Seite Nr. 4
list might be both standard and high definition channels. If your TV source is Analog cable TV Select your Country and your TV Source from the drop down list. To automatically scan for channels, click Next to continue. Click the Scan button and WinTV will automatically scan for analog channels. The scan- ning process takes about 10 minutes. External audio/video sources You can bring video into the WinTV from an external audio/video source such as a cable TV or satellite set top box. In the Dev
Inhaltszusammenfassung zur Seite Nr. 5
lower left corner of WinTV v7). Then click on the Devices tab. Choose your WinTV device by clicking on it, then click Tuner setup. Chose the TV format you want to scan, then click Next. Click Next and a new scan will be started. When the scan is complete, click Next / Next and OK. Using the WinTV v7 application To watch TV, click the Watch TV button. To see the TV Channel list, click your right mouse button in the TV window to display the Options menu. Select Find Channel. You will see the chan
Inhaltszusammenfassung zur Seite Nr. 6
Options menu click your right mouse button to view Playback menu Channel list TV Scheduler Close captions Always on top most important TV control functions. To bring up the Options Menu, click your right mouse button once in the TV window . To see the channel list, click on Find channel. You will see the list of channels which have been scanned. To show the Channel menu as part of the TV window, click the Channel list always on icon at the top of the channel list. To turn on Close captions, cli
Inhaltszusammenfassung zur Seite Nr. 7
Skip Skip Skip back 1 Program Playback Stop back 10 Time bar ahead 30 Skip minute info file seconds seconds ahead 1 minute Settings Record Pause/Play Recording your TV shows If you want to record a TV show you are watching: - Click the Record button. The recorded file name will popup on the video for a few seconds as the recording starts. - When you are finished recording, click the Stop button. - Click the Playback file button and select the last file recorded to play the video you just recorde
Inhaltszusammenfassung zur Seite Nr. 8
- Click the Pause button. Your TV video will stop and the Time counter will start counting. - To start the video from where you paused, click the Play button - To rewind the video to the beginning, click the Skip to the beginning button. If your video was paused, click the Play button. - To rewind the video 1 minute, click the Skip back 1 minute button. If your video was paused, click the Play button. The Delay counter displays how much time you are behind the live video. For example, if the del
Inhaltszusammenfassung zur Seite Nr. 9
Devices tab: allows is where you can re-scan for TV channels and set up the TV sources in WinTV v7. Parental control tab: is where you can set the Parental Control level. Advanced options: you can set options such as Convert TV recordings to .MPG file type and Game mode here. Selecting FM radio programs On those WinTV products which support FM radio, if you have scanned for FM radio staions in the section entitled “Using WinTV for the first time” you can change the WinTV v7 application to FM by
Inhaltszusammenfassung zur Seite Nr. 10
your mouse button in the TV window to see the Options menu. Click Scheduler. To set up an event for timed watching or recording, click the Add button. The items that need to be set for each event are: - Name: you can add a name to the recording. If you do not enter a name, the name will be in the channel/date format. - Channel: chose one of your scanned channels. - Start time: set to the desired start time. Click on the hour to set the hour, the minute to set the minute. Note: It takes about 1
Inhaltszusammenfassung zur Seite Nr. 11
WinTV v7 keyboard shortcuts Ctrl A Aspect ratio Ctrl P Play Ctrl D Display the video and Alt R Record audio format of the TV Alt S Stop program Alt T Start TV Ctrl F Freeze the video Ctrl C Catch up Ctrl Z Open TV Scheduler Ctrl > Skip ahead Ctrl O View program details (digital TV program, Ctrl < Skip back where provided in the broadcast) Ctrl S Display subtitles Ctrl W Full screen toggle Alt F Open File menu for playback Alt M Open the Task Menu Alt P Previous channel Ctrl Q Pau
Inhaltszusammenfassung zur Seite Nr. 12
Troubleshooting Some notes on system compatibility Decoding high definition ATSC TV is very CPU intensive. A graphics card with at least 64MBytes of memory and the latest graphics driver from the manufacturer makes the decoding task easier. Typically a 2.2 GHz Pentium 4 processor or equivalent with a graphics card having 64MBytes of memory is required to proper- ly decode ATSC digital TV on your PC. A 1.6GHz AMD Sempro laptop computer tested in the Hauppauge lab used 50% of the CPU for playing A
Inhaltszusammenfassung zur Seite Nr. 13
does not work on all systems. If this setting does not help, or if you experience WinTV not responding after a channel change, then your graphics system cannot use hardware graphics accel- eration. In this case go back to settings and uncheck “use hardware acceleration” and rerun WinTV. Only some channels are found during ATSC channel scan If you are only receiving some known TV channels when scanning, it means your TV antenna is not adequate to pick up the channel. You will need either an ant
Inhaltszusammenfassung zur Seite Nr. 14
Uninstalling the WinTV driver and applications Run the hcwclear.exe from the installation CD. Select OK A black screen will briefly appear and once it has disappeared the software will be removed. If you now re-start the computer you will be at Step 4 of the installation. The Hauppauge Remote Control (optional on some models) The WinTV remote control software is installed automatically during the installa- tion of the WinTV applications. You will see the WinTV Remote icon in the Device Tray. T
Inhaltszusammenfassung zur Seite Nr. 15
Play button: plays the Application Go button last video recorded. on/off Back/Exit button: will close the current menu or TV exit full screen mode. button 0 - 9 buttons: When in “live” TV mode, is used to Back/Exit button directly enter channel numbers. When playing back a recording, the “1” Audio mute button will skip to 10%, the “2” button 20%, etc. Volume Menu of the length of the up/down recording. Channel Record Skip ahead button: skip up/down button ahead 30 seconds. Play Stop button Skip
Inhaltszusammenfassung zur Seite Nr. 16
page 16
Inhaltszusammenfassung zur Seite Nr. 17
Configuring the WinTV-HVR-1850 and WinTV-HVR-2250 built-in IR blaster for use with WinTV v7 The IR Configuration Utility is used to configure the WinTV-HVR-2250 and WinTV-HVR-1850’s built-in remote control IR blaster for use with either WinTV v7 or Windows Media Center. ote: the remote control is initially configured for Windows Media NCenter. If you want to use the IR blaster with WinTV v7, you must run this utility. To run the IR configuration utility, go to the WinTV program group and click
Inhaltszusammenfassung zur Seite Nr. 18
ote: You will need the remote control from your set top box to com- Nplete the configuration in this section. ote: this proceedure is only necessary if you are using WinTV v7. If Nyou are using Windows Media Center, it will configure the IR blaster automatically The WinTV-HVR’s IR blaster function consists of two components: 1. IR Blaster cable. This cable has an IR cable jack and an IR transmitter. The IR cable jack plugs into the back of the WinTV board, and the IR transmitter needs to be posi
Inhaltszusammenfassung zur Seite Nr. 19
To set up the IR Blaster, see the guide IRRemoteBlaster Quick Installation Guide for WinTV v7. Learning remote control codes for your set top box Send button First make sure the WinTV IR trans- mitter is positioned over the remote sensor on your set top box. Remember, the WinTV IR transmit- ter has a very short transmission dis- tance and needs to be positioned over the remote sensor on your set top box. Key numbers To access the learn function in BlastConfig.exe, click on Advanced Config and L
Inhaltszusammenfassung zur Seite Nr. 20
the learning by clicking the Send button in the Blaster Configuration program. It will send the numbers 123 to your set top box. Your set top box should now be on channel 123. Close the Blaster Configuration program and your configuration will be saved. page 20
