Inhaltszusammenfassung zur Seite Nr. 1
SBC Series
Single Board Computer
Full Size PICMG
with LANx2, VGA, Audio
SPI-8451-LLVA
SPI-8452-LLVA
with LAN, VGA, Audio
SPI-8451-LVA
User’s Manual
CONTEC CO.,LTD.
Inhaltszusammenfassung zur Seite Nr. 2
Check Your Package Thank you for purchasing the CONTEC product. The product consists of the items listed below. Check, with the following list, that your package is complete. If you discover damaged or missing items, contact your retailer. Product Configuration List - Board (One of the following) [SPI-8451-LLVA/-LVA or SPI-8452-LLVA] …1 - Product Guide …1 - IPC Precaution List …1 - CD-ROM (Driver disk utilities) …1 * 1 - IDE 80 pin Ribbon Cable …1 - IDE 40 pin Ribbon Cable …1
Inhaltszusammenfassung zur Seite Nr. 3
Copyright Copyright 2007 CONTEC CO., LTD. ALL RIGHTS RESERVED. No part of this document may be copied or reproduced in any form by any means without prior written consent of CONTEC CO., LTD. CONTEC CO., LTD. makes been considered in the preparation of this document. Should you notice an omission or any questionable item in this document, please feel free to notify CONTEC CO. LTD. All relevant issues have been considered in the preparation of this document. Should you notice an omissio
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Check Your Package ................................................................................................................................i Copyright .................................................................................................................................................ii Trademarks ..............................................................................................................................................ii Caution about
Inhaltszusammenfassung zur Seite Nr. 5
RS-422 / RS-485 specifications.............................................................................................................24 IDE RAID Connector: CN14, CN8 (SPI-8451-LLVA only)................................................................25 Audio Connector: CN9 ..........................................................................................................................26 CD-IN Connector: JCDIN ...................................................................
Inhaltszusammenfassung zur Seite Nr. 6
Deleting an array ............................................................................................................................ 50 Rebuilding a mirrored Array .......................................................................................................... 51 Viewing Controller Settings........................................................................................................... 52 Installing the drivers Windows 2000/XP ..................................
Inhaltszusammenfassung zur Seite Nr. 7
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA vi
Inhaltszusammenfassung zur Seite Nr. 8
1. Introduction 1. Introduction This product is a full-size PICMG single-board computer that uses the Intel(R) 845GV chipset and can mount a 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Pentium(R) 4 processor. The board supports a maximum of 2GB DDR SDRAM and features an all-in-one design that incorporates a range of different interfaces. The SPI-8451-LLVA supports Dual View with two LAN ports (one of which provides GigaBit support) and an LVDS interface. The board also incorporates a RAID co
Inhaltszusammenfassung zur Seite Nr. 9
1. Introduction Option List CPU PCP4-28S Pentium 4 2.8GHz CPU with HeatSink-FAN *1 PCP4-28 Pentium 4 2.8 GHz CPU with HeatSink-FAN *2 PCP4-24 Pentium 4 2.4GHz CPU with HeatSink-FAN *2 PCP4C-20S Celeron 2.0GHz CPU with HeatSink-FAN *1 PCP4C-20 Celeron 2.0GHz CPU with HeatSink-FAN *2 *1 This board requires the width for 2 slots (except CPU heatsink-fan hight). Furthermore, since a heatsink-fan interferes to board, the next 3 slots can not use full size board (length of 200mm
Inhaltszusammenfassung zur Seite Nr. 10
1. Introduction Customer Support CONTEC provides the following support services for you to use CONTC products more efficiently and comfortably. Web Site Japanese http://www.contec.co.jp/ English http://www.contec.com/ Chinese http://www.contec.com.cn/ Latest product information CONTEC provides up-to-date information on products. CONTEC also provides product manuals and various technical documents in the PDF. Free download You can download updated driver software and di
Inhaltszusammenfassung zur Seite Nr. 11
1. Introduction Safety Information This document provides safety information using the following symbols to prevent accidents resulting in injury or death and the destruction of equipment and resources. Understand the meanings of these labels to operate the equipment safely. DANGER indicates an imminently hazardous situation which, if not avoided, will DANGER result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could WARNING r
Inhaltszusammenfassung zur Seite Nr. 12
1. Introduction Environments Use this product in the following environment. If used in an unauthorized environment, the board may overeat, malfunction, or cause a failure. Operating temperature o 0 - 60 C Operating humidity 10 - 90%RH (No condensation) Corrosive gases None Floating dust particles Not to be excessive Inspection Inspection the product periodically as follows to use it safely. - Check that the bus connector - Check that the board has of the board and its cable hav
Inhaltszusammenfassung zur Seite Nr. 13
1. Introduction SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA 6
Inhaltszusammenfassung zur Seite Nr. 14
2. System Reference 2. System Reference Specification Table 2.1. Functional Specifications [SPI-8451-LLVA, SPI-8452-LLVA] < 1 / 2 > Specifications Type SPI-8451-LLVA SPI-8452-LLVA Intel(R) Pentium(R) 4 Processor 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Celeron(R) Processor 1.7G - 2.6GHz (FSB 400 MHz) CPU(Option) (Only corresponding to the Northwood core) Intel(R) Celeron(R) D Processor 2.26G - 2.8GHz (FSB 533MHz) Built in CPU Cache Socket 478 Processor socket Two DIMM 184 pin sock
Inhaltszusammenfassung zur Seite Nr. 15
2. System Reference Table 2.1. Functional Specifications [SPI-8451-LLVA, SPI-8452-LLVA] < 2 / 2 > Specifications Type SPI-8451-LLVA SPI-8452-LLVA RTC/CMOS The RTC (real-time clock) and CMOS data backup by the lithium battery. The Lithium battery specification is shown in table Specification BR-2/3AC2P Voltage 3V Capacity 1200mAh Weigh 15.5g * Backup time: Over 10 years at none AC power 25ºC. * Real Time Clock accurate: ±3 minutes/month at 25ºC. Power management setup via BIOS P
Inhaltszusammenfassung zur Seite Nr. 16
2. System Reference Table 2.2. Functional Specifications[SPI-8451-LVA] < 1 / 2 > Type Specifications Intel(R) Pentium(R) 4 Processor 1.7G - 2.8GHz (FSB400/533MHz) Intel(R) Celeron(R) Processor 1.7G - 2.6GHz (FSB 400 MHz) CPU(Option) (Only corresponding to the Northwood core) Intel(R) Celeron(R) D Processor 2.26G - 2.8GHz (FSB 533MHz) Built in CPU Cache Socket 478 Processor socket Two DIMM 184 pin socket for PC2700 DDR SDRAM up to 2GB. Memory (Option) Intel(R) 845GV Chipset include
Inhaltszusammenfassung zur Seite Nr. 17
2. System Reference Table 2.2. Functional Specifications [SPI-8451-LVA] < 2 / 2 > Type Specifications Power management setup via BIOS Power Management Modem Ring On/Wake One LAN Supports PC98/PC99 ACPI Power management PCI/ISA (PICMG) *1 / 338 (L) x 122 (H) x 28(W) *2 Bus specification/Size (mm) +5VDC±5% +12VDC±5% DC Power Requirements +5VSB (Stand by) ±5% (only when using the ATX power supply) Intel Pentium 4 Processor 2.8 GHz : Power supply specifications +5VDC, 5.4A (Max.) +1
Inhaltszusammenfassung zur Seite Nr. 18
2. System Reference Power Requirements Your system requires a clean, steady power source for reliable performance of the high frequency CPU on the product, the quality of the power supply is even more important. Power Consumption For typical configurations, the CPU board is designed to operate with at least a 250W power supply. A higher-wattage power supply should be used for heavily-loaded configurations. The power supply must meet the following requirements: - Rise time for power supp
Inhaltszusammenfassung zur Seite Nr. 19
2. System Reference Connector & Jumper Location DIMM2 DIMM1 CN3 CN5 JP1 JP2 JP3 JIR1 JCDIN1 CN1 CN2 CN9 PW1 CN10 CN24 CN14 CN15 CN4 CN8 CN11 CN12 CN13 CN6: COM1 CN7: COM2 CN16 CN21 BATT1 CN17 CN22 JKB1 JKB2 FAN2 CN18 CN19CN20 CN23 FAN1 JBAT1 JKB3 JKB4 Figure 2.1. Connector & Jumper Location Item Content Item Content External Battery Connector CN1 ATX power control Connector CN21 (SPI-8451-LVA only) Battery Holder CN2 Front Panel Connector BATT1 (SPI-8451-LVA only) CN3 Floppy Disk D
Inhaltszusammenfassung zur Seite Nr. 20
DATA DATA CTRL CTRL ADDR ADDR 2. System Reference Block Diagram SOCKET 478 CLOCK Processor P4/Celeron D ICS950201 PWM PROCESSOR AGTL+BUS RGB BUS DVI Connector GMCH DDRS DRAM (SPI-8451-LLVA, TMDS BROOKDALE-GV FCBGA760 SPI-8452-LLVA only) SiI164 DVOS BUS HUB LINK IDE Connect UDMA66/100 PCI CNTRL USB 2.0 PORT 1- 6 PCI ADDR/DATA USB ICH4 BGA421 82562ET 10/100 LAN PHY MII LAN 10/100M Connector GIGA LAN / 82541P1 LAN DATA & Connector PCI CNTRL (SPI-8451-LLVA, SPI-8452-LLVA only) PCI ADDR/DATA AC'97
