Bedienungsanleitung Cisco Systems Cisco Wave 694 Application Acceleration Appliance WAVE694K9

Inhaltszusammenfassung zur Seite Nr. 1

CHAPTER
1
Introducing the Cisco Wide Area Virtualization
Engine 594 and 694
This chapter provides a basic functional overview of the Cisco Wide Area Virtualization Engine 594 and
694 (WAVE-594 and WAVE-694) appliance and describes the hardware, major components, and front
and back panel indicators and controls.
This chapter contains the following sections:
• Supported Products, page 1-1
� Hardware Features, page 1-1
� Connecting a Console Terminal, page 1-6
Supported Products
The WAVE-594

Inhaltszusammenfassung zur Seite Nr. 2

Cisco Wide Area Virtualization Engine 594 Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Hardware Features Front Panel Components and LEDs Figure 1-1 shows the front panel components. Figure 1-1 Front Panel 5 7 1 2 3 4 6 8 9 1 Interface Module slot 6 10/100/1000 GE 0/0 connector 2 Hard drive bay 1 (device number 7 10/100/1000 GE 0/1 connector 0) 3 Hard drive bay 2 (device number 8 External USB port 1) 4 Console port (mini-USB) 9 Power On button 5 Console por

Inhaltszusammenfassung zur Seite Nr. 3

Cisco Wide Area Virtualization Engine 594 Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Hardware Features Figure 1-2 shows the front panel LEDs. Figure 1-2 Front Panel LEDs 7 8 1 2 3 4 5 6 9 Table 1-1 describes the front panel LEDs and their functions. Table 1-1 Front Panel LEDs LED Color State Description 1,3 Drive activity LED Green Blinking Drive activity is normal. Green On Online. Green Blinking Drive locate. 1Hz — Off No reading/writing, no activity.

Inhaltszusammenfassung zur Seite Nr. 4

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Hardware Features Back Panel Components and LEDs Figure 1-3 shows the back panel components. Note To monitor the boot process in normal operation, use a console port. Figure 1-3 Back Panel Components 1 2 3 4 5 6 7 8 1 Power supply 1 5 Fan 4 2 Power supply 0 6 Fan 3 3 Fan 6 7 Fan 2 4 Fan 5 8 Fan 1 Figure 1-4 shows the back panel LEDs. Figure 1-4 Back Panel LEDs 1 2 3 4 5 6 7 8 Table 1-2 describes the back panel

Inhaltszusammenfassung zur Seite Nr. 5

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Hardware Features Table 1-2 Back Panel LEDs (continued) LED Color State Description 3 - 8 Fan status Orange On Alarm. Orange Blinking Alarm. Fan speed too low. — Off Normal state. Location of Ports and Connectors The WAVE appliance supports two Ethernet connectors and two Console ports on the front of the appliance. Figure 1-3 shows the back panel ports and connectors. Warning To avoid electric shock, do not c

Inhaltszusammenfassung zur Seite Nr. 6

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Connecting a Console Terminal Figure 1-5 Ethernet Port Connector Speed LED Link/Activity LED 8 1 Console Port Connector The WAVE-594 and WAVE-694 appliance has two console port connectors, serial and mini-USB (see Figure 1-1). Use a console port connector to access the command-line interface (CLI) for controlling the WAVE appliance. For information on connecting a console terminal to the mini-USB console port,

Inhaltszusammenfassung zur Seite Nr. 7

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Connecting a Console Terminal � Vista—32-bit, Business edition � Vista—64-bit � Windows 7—32-bit and 64-bit To install the Cisco Microsoft Windows USB driver, perform the following steps: Note Do not connect the cable from the Windows PC to the WAVE appliance until after the driver is installed. Step 1 Load the DVD that came with your WAVE appliance and double-click the CUSBInst.exe file. The Cisco Virtual Com

Inhaltszusammenfassung zur Seite Nr. 8

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694 Connecting a Console Terminal Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide 1-8 OL-24619-02