Bedienungsanleitung Asus DIGIMATRIX E1670

Inhaltszusammenfassung zur Seite Nr. 1

E1670
®
Quick Start Guide

Inhaltszusammenfassung zur Seite Nr. 2

Front panel features NOTE. The illustrations in this guide are for reference only. For detailed information on your system’s specifications, refer to the user guide. External Power LED HDD LED Card reader LED System power button LED panel — VOLUME + System volume NEXT button dial PREVIOUS button STOP button PLAY/PAUSE button Audio DJ power button Remote sensor Internal Slim optical drive Drive activity LED ® MS /MS Pro™ card slot STOP/EJECT button ® CF /Microdrive™ card slot Emergency ejec

Inhaltszusammenfassung zur Seite Nr. 3

Rear panel features Mic port PS/2 mouse port Line Out port Gigabit LAN port Line In port Ethernet LAN port Antenna port Video In port Cable TV connector Secondary IDE connector DC In socket DC Out socket VGA port Internal components 1. Standby power LED 2. HDD power plug 4 (to HDD power connector) 2 3 1 3. IDE cable (to HDD 5 connector) 4. Chassis fan 6 5. CPU fan 6. DIMM sockets 7 7. HDD metal tray 8 8. Optical drive shield 3 ASUS DiGiMatrix (AB-V10) DVI port HDTV/TV port USB ports PS/2 keyboa

Inhaltszusammenfassung zur Seite Nr. 4

Removing the top cover 2 1 3 Installing a hard disk drive 2 1 Hand slot Slide the metal Disengage the side cover toward hooks from the HDD the rear panel tray and optical drive shield 5 3 4 Insert the tray metal tacks into the 6 drive screw holes (two on the side and two at the bottom) Align the side hooks with the tray rail and optical drive shield. Slide the 7 metal cover toward the front panel until it fits in place 4 Quick Start Guide

Inhaltszusammenfassung zur Seite Nr. 5

Installing a CPU 1 4 2 3 Remove the Disconnect the Disconnect the CPU fan cable chassis fan cable bracket screw 6 5 9 7 8 Re-install the chassis fan and Unlock the socket by pressing the heatsink assembly lever sideways then lifting it up to a 90° angle CAUTION! Make sure that the gold mark on the CPU matches the base of the socket lever. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to prevent bending the pins and damaging the CPU 10 Re-install the CPU fan 5

Inhaltszusammenfassung zur Seite Nr. 6

Installing a DIMM 2 1 1 Align a DIMM on the socket such Press the retaining that the notch on the DIMM clips outward matches the break on the socket Firmly insert the DIMM to the socket until the 3 retaining clips snap back in place and the DIMM is properly seated. 3 CAUTION! A DDR DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. Replacing the top cover Tabs 3 1 3 4 4 2 Fit the top cover tabs with the chassis rail an

Inhaltszusammenfassung zur Seite Nr. 7

Connecting cables Radio antenna Power adapter and cable Antenna port 3 DC in power plug 2 1 Power adapter Power cable DC in socket Power outlet Audio/Video cable Audio out cable 1 1 Audio/Video S-Video Audio I/O cable plug 2 port ports 2 HDTV cable Video out cable HDTV cable plug 1 HDTV port 2 HDTV RCA input ports NOTE. You may also connect a regular TV set using the HDTV cable by connecting the blue jack to the video input port of the TV set. The TV set only receives video signals from the DiGi

Inhaltszusammenfassung zur Seite Nr. 8

Connecting external devices To the front panel Audio Devices HDD Mic — VOLUME + Camera Headphone Scanner To the rear panel Line In Line Out Mic Cable TV RJ-45 PS/2 Mouse DiGiMatrix subsystem VGA DVI USB Mouse PS/2 KB 8 Quick Start Guide