Inhaltszusammenfassung zur Seite Nr. 1
®
CUSL2-M
®
Intel 815E microATX Motherboard
USER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
Inhaltszusammenfassung zur Seite Nr. 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2895-9254 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Addre
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS 1. INTRODUCTION ............................................................................. 7 1.1 How This Manual Is Organized .................................................. 7 1.2 Item Checklist ............................................................................. 7 2. FEATURES ........................................................................................ 8 2.1 The ASUS CUSL2-M ................................................................. 8 2.2 CUSL2-M Moth
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS 4.5 Power Menu .............................................................................. 69 4.5.1 Power Up Control .......................................................... 71 4.5.2 Hardware Monitor ......................................................... 73 4.6 Boot Menu ................................................................................ 74 4.7 Exit Menu ................................................................................. 76 5. SOFTWARE SETUP .........
Inhaltszusammenfassung zur Seite Nr. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Inhaltszusammenfassung zur Seite Nr. 7
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Intructions on setting up the motherboard. 4. BIOS SETUP Intructions on setting up the BIOS 5. SOFTWARE SETUP Intructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference 1.2
Inhaltszusammenfassung zur Seite Nr. 8
2. FEATURES Specifications 2. FEATURES 2.1 The ASUS CUSL2-M The ASUS CUSL2-M motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Latest Intel Processor Support ® Pentium III 100/133MHz FSB FC-PGA Celeron™ 66MHz FSB FC-PGA ® • North Bridge System Chipset: The Intel 815E chipset supports a 66/100/133 Front Side Bus (FSB), up to 512MB of PC100/PC133 SDRAM, and AGP Pro/ 4X mode, which can transport twic
Inhaltszusammenfassung zur Seite Nr. 9
2. FEATURES • Around-the-Clock Intrusion Detection: Chassis intrusion circuitry can log chassis open events into LDCM. The onboard battery supports detection even when normal power is removed and through a new design, battery drain is even lower than the RTC used for keeping time! • Firmware Hub: Provides security-enhancements in computer platforms by sup- porting Random Number Generator (RNG). • PC Health Monitoring: Provides an easy way to examine and manage system status information, such as
Inhaltszusammenfassung zur Seite Nr. 10
2. FEATURES Performance 2. FEATURES 2.1.2 Specifications–Optional Components The following onboard components are optional at the time of purchase: • Smart Networking: Features 3Com’s 3C920 Fast Ethernet controller, which supports Wired for Management, remote wake-up, and OnNow initiatives to reduce Total Cost of Ownership (TCO). 2.1.3 Performance • UltraPerformance: Onboard IDE Bus Master controller with two connectors that support four IDE devices in two channels. Supports UltraDMA/100, Ultr
Inhaltszusammenfassung zur Seite Nr. 11
2. FEATURES 2.1.4 Intelligence • Fan Status Monitoring and Alarm: To prevent system overheat and system damage, the CPU, power supply, and system fans can be monitored for RPM and failure. All the fans are set for its normal RPM range and alarm thresholds. • Temperature Monitoring and Alert: To prevent system overheat and system dam- age, this motherboard supports processor thermal sensing and auto-protection. • Voltage Monitoring and Alert: System voltage levels are monitored to ensure stable
Inhaltszusammenfassung zur Seite Nr. 12
2. FEATURES MB Components 2. FEATURES 2.2 CUSL2-M Motherboard Components See opposite page for locations. Location Processor Support Socket 370 for Pentium III/Celeron (FC-PGA) Processors ..... 2 Feature Setting DIP Switches ................................................... 7 Chipsets Intel 815E Graphics Memory Controller Hub (GMCH) .......... 3 Intel I/O Controller Hub 2 (ICH2) ......................................... 12 4Mbit Firmware Hub (FWH) ............................................
Inhaltszusammenfassung zur Seite Nr. 13
2. FEATURES 2.2.1 Component Locations 1 234 5 6 7 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 ASUS CUSL2-M User’s Manual 13 2. FEATURES Component Location
Inhaltszusammenfassung zur Seite Nr. 14
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 CUSL2-M Motherboard Layout CPU_FAN PS/2KBMS T: Mouse B: Keyboard Top: USB RJ-45 T: USB1 B: USB2 COM1 USBPWR1 KBPWR Socket 370 DSW PWR_FAN LCDTV Intel 815E VGA Graphics & COM2 Memory Line Controller Out Hub (GMCH) Super Line In I/O IR_CON Mic In 0 1 2 3 4 5 ROW AUX LED1 Accelerated Graphics Port (AGP Pro) HEADPHONE CR2032 3V ® MIC2 Lithium Cell CD1 CUSL2-M CMOS Power MODEM Intel I/O PCI1 AAPANEL Controller 4Mbit Firmware Hub VIDEO Audio Hub (
Inhaltszusammenfassung zur Seite Nr. 15
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) JEN p.18 JumperFree™ Mode (Enable/Disable) 2) USBPWR1 p.19 USB Device Wake Up (Enable/Disable) USBPWR2 3) USBCNR1/USBCNR2 p.19 USB/CNR Selection (USB2 Connect/CNR) 4) AUD_EN1 p.20 Onboard Audio CODEC Setting (Enable/Disable) 5) LAN_EN p.20 Onboard LAN Setting (Enable/Disable) 6) KBPWR p.21 Keyboard Power Up (Enable/Disable) 7) DSW p.22 CPU External Frequency Setting Expansion Slots 1) DIMM1/2/3 p.24 168-Pin System Memory Support 2) CP
Inhaltszusammenfassung zur Seite Nr. 16
3. H/W SETUP Layout Contents 3. HARDWARE SETUP 20) ACHA p.38 Chassis Intrusion Connector (2 pins) 21) WOL_CON p.39 Wake-On-LAN Connector (3 pins) 22) WOR p.39 Wake-On-Ring Connector (2 pins) 23) LCDTV p.40 LCD-TV Headers (18-1 pins/18 pins) 24) USB2 p.40 USB Headers (5-1 pins) 25) ATXPWR p.41 ATX Power Supply Connector (20 pins) 26) IR_CON p.41 Standard and Consumer Infrared Connector (10-1 pins) 27) PWRLED (PANEL) p.42 System Power LED Lead (3-1 pins) 28) KEYLOCK (PANEL) p.42 Keyboard Lock Swit
Inhaltszusammenfassung zur Seite Nr. 17
3. HARDWARE SETUP 3.3 Hardware Setup Procedure Before using your computer, you must complete the following steps: • Check Motherboard Settings • Install Memory Modules • Install the Central Processing Unit (CPU) • Install Expansion Cards • Connect Ribbon Cables, Panel Wires, and Power Supply 3.4 Motherboard Settings WARNING! Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electric- ity, you should follow so
Inhaltszusammenfassung zur Seite Nr. 18
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP Motherboard Feature Settings The motherboard’s onboard functions are either adjusted through jumpers or DIP switches. When using DIP switches, the white block represents the switch’s posi- tion. The example below shows all the switches in the OFF position. DSW ® CUSL2-M ON OFF 1. Frequency Selection 2. Frequency Selection 3. Frequency Selection CUSL2-M DIP Switches 4. Frequency Selection 5. Frequency Selection. 1) JumperFree™ Mode (JEN) This ju
Inhaltszusammenfassung zur Seite Nr. 19
3. HARDWARE SETUP 2) USB Device Wake Up (USBPWR1,USBPWR2) These allow you to disable or enable the USB device wake up function. Set these jumpers to Enable if you wish to use your USB devices to wake up your computer. This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX powe
Inhaltszusammenfassung zur Seite Nr. 20
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 4) Onboard Audio CODEC Setting (AUD_EN1) (available on audio model only) The onboard audio CODEC may be enabled or disabled using all of these jump- ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio card on any of the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot later in this section). If using a PCI audio expansion card, Onboard AC97 Audio Controller in 4.4.2 I/O Device Configuration must als
