Inhaltszusammenfassung zur Seite Nr. 1
LE-366
TM
AMD Geode
LX800 3.5” Embeded Board
User’s Manual
Edition 1.0
2008/02/20
Inhaltszusammenfassung zur Seite Nr. 2
LE-366 User’s Manual Copyright Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protected by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All
Inhaltszusammenfassung zur Seite Nr. 3
LE-366 User’s Manual Packing List Please check the package before you starting setup the system. Hardware: LE-366 series motherboard x 1 Cable Kit: 44pin 44pin 40pin Power Cable x 1 44-pin ATA33 IDE Cable x 1 Floppy Cable x 1 DC_IN Power Cable x 1 PS2 keyboard & mouse cable RS232 Cable x 1 USB Cable x 1 Printed Matters: User’s Manual x 1 Driver CD x 1 -2-
Inhaltszusammenfassung zur Seite Nr. 4
LE-366 User’s Manual Index Chapter 1 .................................................................... 6 1.1 ...............................................................................6 1.2 .........................................................................7 1.3 ...........................................................................9
Inhaltszusammenfassung zur Seite Nr. 5
LE-366 User’s Manual A.7 ..........................................................35 Appendix B ................................................................ 37 B.1 BIOS Auto Flash Tool................................................................37 B.2 Flash Method..............................................................................37 Appendix C ............................
Inhaltszusammenfassung zur Seite Nr. 6
LE-366 User’s Manual (The Page is Left For Blank) -5-
Inhaltszusammenfassung zur Seite Nr. 7
LE-366 User’s Manual Chapter 1 1.1 LE-366 is the Mini-ITX motherboard with AMD Geode LX800 platform, with onboard VGA, AC97 audio, GIGA LAN interface. Based on the AMD Geode LX800 processor, the board provides many advanced features for reduced power consumption, fan-less design and high cost/price rate of production. Low Power Consumption Based on the AMD Geode LX800@500MHz processor onboard, it only takes
Inhaltszusammenfassung zur Seite Nr. 8
LE-366 User’s Manual 1.2 General Specification Form Factor 145 mm x 102 mm (5.7” x 4”) CPU Up to AMD Geode LX 800 Processor Memory One So-DIMM slot support DDR 266/333/400 MHz SDRAM up to 1GB Chipset AMD Geode CS5536 BIOS Phoenix-Award 4Mb PnP Flash Green Function ACPI 1.0 and APM 1.2 compliant Watchdog Timer PIT (Programmable Interval Timer) with 3 channels Real Time Clock AMD Geode CS5536 built in RTC with Lithium
Inhaltszusammenfassung zur Seite Nr. 9
LE-366 User’s Manual External Audio phone jack for Line-out and MIC-in. Connector Onboard audio connector with pin header Expansive Interface PCI 1 Mini-PCI slot V2.2 33/66 MHz 1 Compact Flash (optional) Power and Environment Power Requirement 12V DC Jack power connector Temperature Operating temperature with 0℃~60℃ (32℉ ~ 140℉) Storage temperature with 20℃~ 80℃ (-68℉ ~ 176℉) Ordering Code LE-366 AMD LX800 processor Mini-ITX with onboard
Inhaltszusammenfassung zur Seite Nr. 10
LE-366 User’s Manual 1.3 ‘ ‘ ‘ ‘ ‘ ‘ -9-
Inhaltszusammenfassung zur Seite Nr. 11
LE-366 User’s Manual 1.4 16Mbx16 CRT DDR DIMM AMD Geode LX Processor LVDS MiniPCI PCI BUS/33Mhz SLOT RealTek LAN1 IDE X 1 RTL8110SB CFD X 1 AMD Geode CS5536 AUDIO ALC203 4 x USB2.0 ports JACK 83627HF Flash BIOS KB & MS (SST FWH) Digital I/O Slim FDD COM1 COM2 -10-
Inhaltszusammenfassung zur Seite Nr. 12
LE-366 User’s Manual Chapter 2 2.1 USB2 CN4 J8 P2 CN1 CN9 P1 JP3 CN7 LAN1 USB1 JP2 FDD1 MPCI1 CN8 CN3 J4 JP1 CN2 J7 J6 MIC1 JSPK1 LAN1 USB1 PS2 COM VGA MIC LINE OUT -11-
Inhaltszusammenfassung zur Seite Nr. 13
LE-366 User’s Manual Jumper Function JP1 LVDS Panel Voltage Selection (+5V / + 3.3V) JP2 COM2 RS232/422/485 Select JP3 COM2 RS232/422/485 Select J4 Clear CMOS Selection J7 CFD Master/Slave Selection JP3 JP2 J4 JP1 J7 JP2 JP3 5 6 3 12 RS-232 2 1 10 1 RS-485 RS-422 -12-
Inhaltszusammenfassung zur Seite Nr. 14
LE-366 User’s Manual 2.1.1 Connector Function Remark CN1 VGA Display / Audio Connector Standard CN2 Front Audio Connector LVDS Connector Slim CN3 Front Panel Connector Slim CN4 COM2 RS-232 / RS-422 / RS-485 Connector Standard CN7 PS2 Keyboard / Mouse Connector Standard CN8 GPIO Connector Standard CN9 SYSTEM Fan Connector Standard J6 EIDE Connector Standard J8 Little 4-Pin Power connector Standard USB2 USB2 Connector Stand
Inhaltszusammenfassung zur Seite Nr. 15
LE-366 User’s Manual 2.2 2.2.1 The board integrates AMD Geode LX800 500MHz processor with special design for power appliance. It requires only 3.8W power consumption at most, and is totally designed for fan-less system. 2.2.2 The board supports one 200-pin DDR266/333/400 SDRAM up to 1GB of capacity, and supports non-ECC unbuffered memory modules. -14-
Inhaltszusammenfassung zur Seite Nr. 16
LE-366 User’s Manual 2.5 The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: J4 Type: Onboard 3-pin jumper J4 Mode 1-2 Normal Operation 2-3 Clear CMOS Default setting Jumper: J7 Type: Onboard 3-pin jumper J7 Mode 1-2 Master 2-3 Slave Default setting 31 J4 3 1 J7 -15-
Inhaltszusammenfassung zur Seite Nr. 17
LE-366 User’s Manual 2.3 The board has one Ultra DMA33 IDE interface to support up to 2 ATAPI devices, and one Compact Flash Type II socket on the solder side. CF -16-
Inhaltszusammenfassung zur Seite Nr. 18
LE-366 User’s Manual 2.4 The board provides a slim type floppy port; please use the 26-pin FPC cable in the package to connect the floppy device. FDD Floppy rear side 4. Lift up this plastic bar 5. Slot the cable in (Blue paste for outside) 6. Press back the plastic bar 1. Lift up the brown plastic bar 2. Slot the cable in (Blue paste for brown bar side) 3. Press back the plastic bar -17-
Inhaltszusammenfassung zur Seite Nr. 19
LE-366 User’s Manual 2.8 The board integrates AMD Geode LX800 processor with built-in 2D video engine, to provide onboard DB15 VGA connector, 18-bit LVDS interface. The built-in 2D video engine supports following specified functions: ● High-performance 2D graphics controller ● Alpha BLT ● Integrated dot clock PLL 2.4.1 Please connect your CRT or LCD monitor with DB15 male connector to the onbo
Inhaltszusammenfassung zur Seite Nr. 20
LE-366 User’s Manual 2.4.2 The board provides one 30-pin LVDS connector for 18-bit single channel panel, supports up to 1024 x 768 of resolution, with one LCD backlight inverter connector and one jumper for panel voltage setting Connector: JP1 Type: 3-pin Power select Header Pin Description 1 VCC (5V) 2 LCDVCC 3 VCC3 (3.3V) JP1 -19-
