Inhaltszusammenfassung zur Seite Nr. 1
PCM-9570/S
®
Socket 370 Celeron™/Pentium III
SBC with LCD, Ethernet and SCSI
User's Manual
Inhaltszusammenfassung zur Seite Nr. 2
Copyright notice This document is copyrighted, 2000. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assu
Inhaltszusammenfassung zur Seite Nr. 3
Acknowledgments AMD is a trademark of Advanced Micro Devices, Inc. Award is a trademark of Award Software International, Inc. Cyrix is a trademark of Cyrix Corporation. IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation. Intel, Celeron, Pentium and Pentium II are trademarks of Intel Corporation. ® Microsoft Windows is a registered trademark of Microsoft Corp. RTL is a trademark of Realtek Semi-Conductor Co., Ltd. Symbios is a trademark of Symbios Inc. Trident
Inhaltszusammenfassung zur Seite Nr. 4
Packing list Before you begin installing your card, please make sure that the following materials have been shipped: 1 PCM-9570/S all-in-one single board computer 1 CD disc with utility and drivers 1 Startup Manual If any of these items are missing or damaged, contact your distributor or sales representative immediately. Please refer to Appendix E for the optional interface wiring kit.
Inhaltszusammenfassung zur Seite Nr. 5
Contents Chapter 1 General Information ....................... 1 1.1 Introduction ........................................................................2 Highly integrated Socket 370 SBC ......................................2 1.2 Features ...............................................................................3 1.3 Specifications ......................................................................3 Standard SBC functions .......................................................3 PCI S
Inhaltszusammenfassung zur Seite Nr. 6
2.9 Floppy drive connector (CN9) ........................................17 2.9.1 Connecting the floppy drive......................................18 2.10 Parallel port connector (CN12).......................................18 2.11 Keyboard and PS/2 mouse connector (CN5) .................19 2.12 Front panel connector (CN18) ........................................19 2.12.1 Speaker ....................................................................19 2.12.2 LED interface ........................
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 3 Software Configuration ................ 31 3.1 Introduction ......................................................................32 3.2 Ethernet software configuration.....................................33 Chapter 4 Award BIOS Setup ........................ 35 4.1 System test and initialization ..........................................36 4.1.1 System configuration verification.............................36 4.2 Award BIOS setup .....................................................
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 6 SCSI Setup and Configurations .. 59 6.1 Introduction ......................................................................60 6.2 Before you begin ...............................................................61 6.3 Basic rules for SCSI host adapter and device installation ........................................................................61 6.4 Configuring the SCSI adapter ........................................62 6.5 SCSI terminators ...............................
Inhaltszusammenfassung zur Seite Nr. 9
C.8 IDE hard drive connector (CN11) ..................................92 C.9 Parallel port connector (CN12).......................................93 C.10 Backlight connector (CN13) ............................................94 C.11 Peripheral power connector (CN14) ..............................94 C.12 CRT display connector (CN15).......................................95 C.13 24-bit LCD display connector (CN16)............................96 C.14 Ext. LCD display connector (CN17)................
Inhaltszusammenfassung zur Seite Nr. 10
Tables Table 2-1: Jumpers..............................................................................8 Table 2-2: Connectors .........................................................................9 Table 2-3: CMOS clear (J1) ...............................................................15 Table 2-4: Buzzer enable/disable (J9) ...............................................15 Table 2-5: ATW power on function select (J11) .................................22 Table 2-6: COM2 RS-232/422/485 sett
Inhaltszusammenfassung zur Seite Nr. 11
Table C-20: CompactFlash card connector (CN21) ......................... 102 Table C-21: PanelLink connector (CN22) ........................................ 103 Table C-22: Fan power connector (FAN1) ....................................... 104 Table D-1: System I/O ports ............................................................ 106 Table D-2: 1st MB memory map ...................................................... 107 Table D-3: DMA channel assignments ........................................
Inhaltszusammenfassung zur Seite Nr. 12
Figures Figure 1-1: PCM-9570/S dimensions ...................................................6 Figure 2-1: Locating jumpers .............................................................10 Figure 2-2: Locating connectors (component side) ............................11 Figure 2-3: Locating connectors (solder side) ....................................12 Figure 2-4: Wiring for ATX power switch function ..............................21 Figure 4-1: Setup program initial screen ........................
Inhaltszusammenfassung zur Seite Nr. 13
1 General Information This chapter gives background information on the PCM-9570/S. Sections include: Introduction Features Specifications Board layout and dimensions CHAPTER
Inhaltszusammenfassung zur Seite Nr. 14
1.1 Introduction ® The PCM-9570/S is an all-in-one Celeron™/Pentium III level single board computer (SBC) with an Ultra2 SCSI controller (PCM-9570S), a 2x AGP LCD controller, a PCI Fast Ethernet interface and one PCI TM expansion slot. With the Intel Celeron processor, the PCM-9570/S achieves outstanding performance that surpasses any other SBC in its class. This compact unit is only 203 x 146 mm (8" x 5.75"). It offers all the functions of a single board industrial computer, but still fits in
Inhaltszusammenfassung zur Seite Nr. 15
1.2 Features Ultra2 SCSI interface: Supports up to 80 MB/sec transfer rates (PCM-9570S only) 3D VGA/LCD interface: Supports a 2x AGP interface, 3D 64-bit engine, as well as a 2.5 MB embedded Trident 9525 DVD chip Display resolution: Up to 1024 x 768 @ 64 K colors, for both LCD and CRT displays PanelLink (optional): Scalable bandwidth of 25 ~ 112 MHz (VGA 640 x 480 ~ SXGA 1280 x 1024) 100 MHz FSB design: To facilitate future upgrading to ® Pentium III Wake on LAN; modem 1.3 Specificat
Inhaltszusammenfassung zur Seite Nr. 16
Serial ports: Four serial ports with +5 V / +12 V power capability (COM1, 3, 4: RS-232; and COM2: RS-232/422/485) Watchdog timer: Software enabled/disabled. 62-level interval from 1 to 62 seconds. Jumperless selection. Generates system reset or IRQ11 Keyboard/mouse connector: 8-pin header connector for keyboard and PS/2 mouse USB interface: Two USB connectors with fuse protection. Complies with USB Spec. Rev. 1.0 Infared port: Supports up to 115 Kbps transfer rates PC/104 expansion:
Inhaltszusammenfassung zur Seite Nr. 17
PCI bus Ethernet interface Chipset: Realtek RTL8139 PCI-bus Ethernet controller Ethernet interface: PCI 100/10 Mbps, IEEE 802.3U compatible Remote boot ROM: For diskless system Ultra2 SCSI (PCM-9570S only) Chipset: SYM 53C895 chips Performance: Ultra2 SCSI interface, up to 80 MB/sec transfer rates Solid state disk One 50-pin socket: For one CompactFlash card, shared with one IDE channel PanelLink (optional) Chipset: Sil 154 Panel Link Digital Transmitter Scalable band width: Rang
Inhaltszusammenfassung zur Seite Nr. 18
1.4 Board layout and dimensions Figure 1-1: PCM-9570/S dimensions 6 PCM-9570/S User's Manual
Inhaltszusammenfassung zur Seite Nr. 19
2 Installation This chapter tells how to set up the PCM-9570/S hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedure. CHAPTER
Inhaltszusammenfassung zur Seite Nr. 20
2.1 Jumpers The PCM-9570/S has a number of jumpers that allow you to configure your system to suit your application. The table below lists the function of each of the board’s jumpers: Table 2-1: Jumpers Label Function J1 CMOS clear J2 Watchdog timer action J3 SCSI terminator power enable/disable J4 ATX power switch button J6 COM port RI pin setting J7 PanelLink control J9 Buzzer enable/disable J10 COM2 RS-232/422/485 setting J11 ATX power on function select J12 LAN controller power select SW1 Pa
