Inhaltszusammenfassung zur Seite Nr. 1
CP-150
6U-6-slot backplane
portable enclosure for
CompactPCI
Advantech CompactPCI
Modular Industrial Computer
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Notice This document is copyrighted, 2004. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufactu
Inhaltszusammenfassung zur Seite Nr. 3
Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a conse
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Information SAFETY INSTRUCTIONS 1. Please read these safety instructions carefully. 2. Please keep this Users Manual for later reference. 3. Please disconnect this equipment from AC outlet before cleaning. Dont use liquid or sprayed detergent for cleaning. 4. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 5. Please keep this equipment from humidity. 6. Lay this equipment on a reliable surface when ins
Inhaltszusammenfassung zur Seite Nr. 5
16. Never open the equipment. For safety reason, qualified service personnel should only open the equipment. 17. CAUTION: The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacture. Discard used batteries according to the manufacturers instructions. CP-150 User Manual --- Page V
Inhaltszusammenfassung zur Seite Nr. 6
Packing List Before installation, ensure that the following materials have been received: One CP-150 CompactPCI enclosure with backplane One box of accessories One warranty certificate One CD-ROM for user manual (PDF file) If any of these items are missing or damaged, contact your distributor or sales representative immediately. Technical Support and Sales Assistance If you have any technical questions about the CP-150 or any other Advantech products, please visit our supp
Inhaltszusammenfassung zur Seite Nr. 7
Contents 1. General Information............................................ 1 1.1 Introduction ................................................................................. 2 1.2 Features ....................................................................................... 3 1.3 Specifications................................................................................. 3 1.3.1 General.......................................................................................... 3 1.
Inhaltszusammenfassung zur Seite Nr. 8
3.5 Connector and jumper locations.......................................................24 3.5.1 ATX Power Connector (ATX1) .....................................................25 3.5.2 Power Switch .................................................................25 3.5.3 Fan Module Connector .................................................25 Appendix A
26 Appendix B
42 CP-150 User Manual --- Page VIII
Inhaltszusammenfassung zur Seite Nr. 9
Figures Figure 1-1: CP-150 dimensions ...............................................................................4 Figure 1-2: Appearance of CP-150......................................................................... 4 Figure 2-1: Left view of CP-150 ...........................................................................6 Figure 2-2: Right view of CP-150 .......................................................................7 Figure 3-1: MIC-3800 Backplane slot numbering .....
Inhaltszusammenfassung zur Seite Nr. 10
1 General Information CP-150 User Manual --- Page 1
Inhaltszusammenfassung zur Seite Nr. 11
1.1 Introduction CP-150 is a robust, portable enclosure with 15 touch LCD monitor. With a field-tested rugged, high impact design, the CP-150 provides many flexible and powerful features. Compliant with CompactPCI specification, this all-in-one model is the most pragmatic solution for any mobile application. The CP-150 is the most compact CompactPCI computer on the market accommodating a 15 super TFT LCD screen for a truly satisfying viewing experience. The CP-150 is equipped wi
Inhaltszusammenfassung zur Seite Nr. 12
1.2 Features ® Portable enclosure for 6U CompactPCI boards ® 6-slot 6U CompactPCI backplane 15 Touch LCD monitor built-in Supports computer telephony specification (PICMG 2.5) Built-in slim CD-ROM, FDD and Keyboard Supports one 3.5 HDD Supports 400 W ATX power supply High impact resistant plastic and high strength aluminum plat chassis Space for peripheral kit in any application Easy access for maintenance Vibration and shock resistant Build-in Mechanical
Inhaltszusammenfassung zur Seite Nr. 13
Factor Correction). Output (per module): 400W, +3.3V,and +5V total output power shall not exceed 180W Maximum load: +3.3V @ 28A, +5V @ 30A, +12V @ 18A, -5V @0.5A, -12V @ 0.8A, +5Vsb @ 2.0 A Minimum load: +3.3 V @ 0.3 A, + 5V @0.3 A, +12 V @ 0 A, -5V @ 0A, -12V @0A, +5 Vsb @ 0A MTBF: 100,000 hours @ 25° C Safety: UL/CE 1.4 Dimensions Figure 1-1: CP-150 dimensions. Figure 1-2: Appearance of CP-150 CP-150 User Manual --- Page 4
Inhaltszusammenfassung zur Seite Nr. 14
2 Installation CP-150 User Manual --- Page 5
Inhaltszusammenfassung zur Seite Nr. 15
2.1 Initial Inspection We have carefully inspected the CP-150 mechanically and electrically before shipping. It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the CP-150, check it for signs of shipping damage (damaged box, scratches, dents, etc.). If it is damaged or fails to meet specifications, notify our service department or your local representative immediately. Also notify the carrier. Retain the shipping carton and packing material f
Inhaltszusammenfassung zur Seite Nr. 16
Figure 2-2: Right view of Cp-150 2.3 Computer Operation 2.3.1 Keyboard and Touch Pad How to release There are two release buttons located on the top-left and top-right of the keyboard. When the buttons are pressed, the keyboard is disengaged from the portable enclosure and may be released. There are also two mounting legs located at the bottom of the keyboard that are attached to the portable enclosure for stability and which allow the keyboard to be pulled downward. Pull the keyb
Inhaltszusammenfassung zur Seite Nr. 17
How to pack away the keyboard Follow the same procedure to pack the keyboard back into the portable enclosure in a reverse manner. Note that the keyboard cable should be put back into its proper lodging location. Make sure the two locking mechanisms are properly secured after it is put back. What to look for The keyboard cable is located on the top portion of the keyboard. It is a coil cable with a RJ-45 connector at one end. The jack should now be removed and attached to the portabl
Inhaltszusammenfassung zur Seite Nr. 18
the left/right buttons on a mouse. You may also tap on the touch pad to indicate a left click. 2.3.2 Side Panel Depending on the system board and your add-on cards, you may also have other ports such as the Ethernet and Audio ports. You may replace the cover even though the other slots arent being used. Figure 2-5 2.3.3 Power Switch and Plug The power receptacle is located on the right side of the machine near the bottom. The three-prong power plug is supplied. Depending on your
Inhaltszusammenfassung zur Seite Nr. 19
Figure 2-6 2.3.4 Power Supply The CP-150 comes with a PS/2 power supply with full-range auto-sensing Active PFC, and 400W output. 2.3.5 Hooking up external monitor The external CRT monitor / Projector can be hooked up via the side panel VGA (15pin) port while the system is off. The cable from the CRT/Projector should be inserted into this port. If this cable is connected, the display should come on whenever the machine is turned on. The internal display monitor uses a standard vie
Inhaltszusammenfassung zur Seite Nr. 20
2.3.6 Additional Bottom Cooling Fan An additional cooling fan can be found on the bottom of the case. This bottom fan is used to create airflow inside the slots. This increases the efficiency of the controller and the other cards. Figure 2-7 2.3.7 Slim CD-ROM CD-ROM drives are important because many of the applications available today are stored CD due to their larger storage capacity. The CD is a read-only medium (CDR and CDRW are media that are for user creation of data on CD) a
