Inhaltszusammenfassung zur Seite Nr. 1
Users Guide
16-Bit Ethernet PC Card
Ethernet PC Card
Whats Inside
Hardware Description 2 Pages 2 to 5
LED Indicators 2 see this side
Hardware Installation 3
Software Driver Installation 4
EMI Certification 5
í
Pages 6 to 8 Specifications 7
see this side Software Drivers 7
Technical Support 8
î
Inhaltszusammenfassung zur Seite Nr. 2
Hardware Description Acctons Ethernet PC Card is a "feature-packed" credit card- sized adapter for PCMCIA-compliant personal computers. The card comes in two models (two media couplers to choose from): EtherPair-PCMCIA (EN2216-1) EtherDuo-PCMCIA (EN2216-2) The EtherPair-PCMCIA has a single RJ-45 (10BASE-T) port for unshielded twisted-pair connection, while the EtherDuo- PCMCIA has an RJ-45 and BNC (10BASE2) connector. This product features NE2000 compatibility. You can use the provided dri
Inhaltszusammenfassung zur Seite Nr. 3
Hardware Installation 1. Insert the Ethernet PC Card into the computers PCMCIA slot. Insert the card with the 68-pin connector facing the PCMCIA slot and the label facing up. See Figure 1 for illustration. Figure 1. Inserting the Ethernet PC Card into the Type II PCMCIA Slot. 2. Plug the media coupler into the cards 15-pin connector. 3. Connect the media coupler to the network using either UTP or thin coax cabling. a. Connecting to the RJ-45 port using UTP cable. Figure 2. Connection Usin
Inhaltszusammenfassung zur Seite Nr. 4
b. Connecting to the BNC port with thin coax cable. Figure 3. Connecting to Thin Ethernet Cable (EtherDuo-PCMCIA, model EN2216-2) Note: If the card is attached to the end of the network segment, be sure a 50-Ohm terminator is installed on the open end of the T-type connector. Software Driver Installation The diskette labled Driver Diskette, that comes with the package contains all the software drivers available for the Ethernet PC Card. A RELEASE.TXT file, describing the contents of the di
Inhaltszusammenfassung zur Seite Nr. 5
EMI Certification FCC Class B Certification Accton Technology Corporation Model Number: EN2216 FCC ID: HEDEN2216 This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Warning! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant t
Inhaltszusammenfassung zur Seite Nr. 6
The Interference Handbook This booklet is available from the U.S. Government Printing Office. Washington, D.C. 20402. Stock No. 004-000-00345-4. Note: In order to maintain compliance with the limits of a Class B digital device, Accton requires that you use a quality interface cable when connecting to this device. Changes or modifications not expressly approved by Accton could void the user's authority to operate this equipment. Suggested cable type is unshielded twisted- pair (UTP) for RJ-45 con
Inhaltszusammenfassung zur Seite Nr. 7
Specifications Standard Conformance EN2216-1: IEEE 802.3 (10BASE-T) EN2216-2: IEEE802.3 (10BASE-T, 10BASE2) PCMCIA Release 2.1 Type II Host Interface PCMCIA-compliant computers Ethernet Data Rate 10 Mbps (20 Mbps at full duplex) Media Connection EN2216-1: 1 RJ-45 port (10BASE-T) EN2216-2: 1 RJ-45 port (10BASE-T) 1 BNC port (10BASE2) Data Bus Width 16-bit RAM Buffer 32KB I/O Base Address 200H to 360H, software selectable Interrupt 2 (9), 3, 4, 5, 10, 11, 12, 15 LED Indicators Transmit/Receive, Li
Inhaltszusammenfassung zur Seite Nr. 8
Technical Support Your dealer or installer is the person who understands your network and Accton units. If neither is available to help you, Accton technical support engineers are available by fax, mail or phone. Send your technical questions by fax to: International Headquarters: 886-3-577-0267 USA Headquarters: 408-452-8988 To obtain software upgrades connect via ftp to ftp.accton.com.tw International site ftp://www.accton.com US site ftp://www.accton.com.tw Taiwan site ftp://www.accton
Inhaltszusammenfassung zur Seite Nr. 9
During local business hours, call: International Headquarters Monday through Friday 8 a.m. to 6 p.m.: 886-3-5770-270 USA Headquarters Monday through Friday 7 a.m. to 5 p.m. Pacific Time: 408-452-8900 or 800-926-9288 The publisher assumes no responsibility for errors that may appear in this document. Nor does it make any commitment to update the information it contains. All brand and product names mentioned are trademarks or registered trademarks of their respective companies. EN2216 E0198-R01 15
