Inhaltszusammenfassung zur Seite Nr. 1
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix
Motherboard
AMD Socket AM2
User’s Manual
AMD Socket AM2
ATX Motherboard
NB: NVIDIA C51XE
SB: NVIDIA MCP55PXE
2GHz HT
Dual DDR2 800 DIMM Slots
NVIDIA SLI Technology
Dual PCI-E X16 Slots
Dual GbE LAN
IEEE 1394a
6x SATA 3Gb/s with
RAID 0/1/0+1/5/JBOD
For more information:
Fatal1ty Guru™ Technology
www.abit.com.tw
ABIT OTES GT™ Technology
7.1 Channel HD Audio
Inhaltszusammenfassung zur Seite Nr. 2
User’s Manual st English, 1 Edition May, 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular part of this document. In no event shall the m
Inhaltszusammenfassung zur Seite Nr. 3
Introduction Hardware Setup BIOS Setup Driver & Utility CD Appendix Contents 1. Introduction..................................................................... 1-1 1.1 Fatal1ty ......................................................................................1-1 1.2 Features & Specifications .............................................................1-3 1.3 Motherboard Layout.....................................................................1-5 2. Hardware Setup ...........
Inhaltszusammenfassung zur Seite Nr. 4
3.2 Standard CMOS Features..............................................................3-3 3.3 Advanced BIOS Features..............................................................3-3 3.4 Advanced Chipset Features...........................................................3-4 3.5 Integrated Peripherals..................................................................3-4 3.6 Power Management Setup............................................................3-5 3.7 PnP/PCI Configurations ....
Inhaltszusammenfassung zur Seite Nr. 5
Introduction 1. Introduction 1.1 Fatal1ty FATAL1TY STORY Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, but at that young age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and a grasp of mathematics (an important element in v
Inhaltszusammenfassung zur Seite Nr. 6
LIVIN’ LARGE Since my first big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of International media coverage on outlets such as MTV, ESPN and G4TV to name only a few. It's unreal - it's crazy. I’m living a dream by playing video games for a living. I’ve always been athletic and took sports like hockey and football very seriously, working out and training hard. This discipline helps me become a better gamer and my drive to
Inhaltszusammenfassung zur Seite Nr. 7
Introduction 1.2 Features & Specifications CPU Supports Socket 940 AM2 Processor with 2GHz system bus using Hyper-Transport™ Technology Supports AMD CPU Cool ‘n’ Quiet Technology Chipset ® Northbridge: NVIDIA C51XE Chipset ® Southbridge: NVIDIA MCP55PXE Chipset Memory Four 240-pin DIMM slots Supports Dual Channel DDR2 800 Un-buffered ECC/Non-ECC memory Supports maximum memory capacity up to 8GB ABIT Engineered ™ ABIT Fatal1ty Guru Technology ™ ABIT OTES GT Tec
Inhaltszusammenfassung zur Seite Nr. 8
2x IEEE1394a headers Rear Panel I/O ™ OTES GT 1x PS/2 Keyboard connector 1x PS/2 Mouse connector 2x RJ-45 Gigabit LAN ports 4x USB 2.0 ports Miscellaneous ATX form factor (305mm x 245mm) Specifications and information contained herein are subject to change without notice. For more information: www.abit.com.tw 1-4
Inhaltszusammenfassung zur Seite Nr. 9
Introduction 1.3 Motherboard Layout 1-5
Inhaltszusammenfassung zur Seite Nr. 10
For more information: www.abit.com.tw 1-6
Inhaltszusammenfassung zur Seite Nr. 11
Hardware Setup 2. Hardware Setup In this chapter we will elaborate all the information you need upon installing this motherboard to your computer system. ※ Always power off the computer and unplug the AC power cord before adding or removing any peripheral or component. Failing to so may cause severe damage to your motherboard and/or peripherals. Plug in the AC power cord only after you have carefully checked everything. 2.1 Choosing a Computer Chassis This motherboard carries an AT
Inhaltszusammenfassung zur Seite Nr. 12
To install this motherboard: 1. Locate all the screw holes on the motherboard and the chassis base. 2. Place all the studs or spacers needed on the chassis base and have them tightened. 3. Face the motherboard’s I/O ports toward the chassis’s rear panel. 4. Line up all the motherboard’s screw holes with those studs or spacers on the chassis. 5. Install the motherboard with screws and have them tightened. ※ To prevent shorting the PCB circuit, please REMOVE the metal studs or spacer
Inhaltszusammenfassung zur Seite Nr. 13
Hardware Setup 2.3.1 CMOS Memory Clearing Header and Backup Battery The time to clear the CMOS memory occurs when (a) the CMOS data becomes corrupted, (b) you forgot the supervisor or user password preset in the BIOS menu, (c) you are unable to boot-up the system because the CPU ratio/clock was incorrectly set in the BIOS menu. This header uses a jumper cap to clear the CMOS memory and have it reconfigured to the default values stored in BIOS. Pins 1 and 2 shorted (default): Normal o
Inhaltszusammenfassung zur Seite Nr. 14
CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “CMOS BATTERY HAS FAILED” or “CMOS checksum error” displays on monitor, this backup battery is no longer functional and has to be renewed. To renew the backup battery: 1. Power off the system and disconnect with AC power source. 2. Re
Inhaltszusammenfassung zur Seite Nr. 15
Hardware Setup 2.3.2 Wake-up Headers These headers use a jumper cap to enable/disable the wake-up function. PS2-PWR1: Pin 1-2 shorted (Default): Disable wake-up function support at Keyboard/Mouse port. Pin 2-3 shorted: Enable wake-up function support at Keyboard/Mouse port. USB-PWR1: Pin 1-2 shorted (Default): Disable wake-up function support at USB1 port. Pin 2-3 shorted: Enable wake-up function support at USB1 port. USB-PWR2: Pin 1-2 shorted (Default): Disable wake-u
Inhaltszusammenfassung zur Seite Nr. 16
2.4 Connecting Chassis Components 2.4.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connected to this 24-pin connector. Connect from pin-1 for either type. However, a 20-pin power supply may cause the system unstable or even un
Inhaltszusammenfassung zur Seite Nr. 17
Hardware Setup 2.4.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention to connect these headers. A wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could cause system malfunction.
Inhaltszusammenfassung zur Seite Nr. 18
2.4.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. CPUFAN1: CPU Fan Power Connector SYSFAN1: System Fan Power Connector AUXFAN1~4: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 2-8
Inhaltszusammenfassung zur Seite Nr. 19
Hardware Setup 2.5 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. 2.5.1 CPU Socket AM2 ※ DO NOT touch or bend the delicate pins on the CPU whenever you are holding it. The installation procedures vary with different types of CPU fan-and-heatsink assembly. The one shown here is served for DEMO only. For detailed information on how to install the one you bough
Inhaltszusammenfassung zur Seite Nr. 20
4. Place the heatsink and fan assembly onto the retention frame. Match the heatsink clip with the socket mounting-lug. Hook the spring clip to the mounting-lug. 5. On the other side, push the retention clip straight down to lock into the plastic lug on the retention frame. 6. Connect the CPU cooling fan power cable to the CPUFAN1 connector on this motherboard. ※ A higher fan speed will be helpful for better airflow and heat-dissipation. Nevertheless, stay alert to touch any
