Bedienungsanleitung WiebeTech I

Inhaltszusammenfassung zur Seite Nr. 1

SilverSATA I Internal™
USER’S MANUAL
Revised May 4, 2007


Features
• Swappable tray in a standard 5 1/4" internally mountable bay
(same size as most CD-ROM drives). A spare internal SATA
port is required.
• Hot-swappable tray allows you to switch drives without shutting
down the system. (Assuming your computer’s internal SATA
host supports this feature.)
• Tray is compatible with other products in the SilverSATA series.
Use the SilverSATA I Internal to easily access one

Inhaltszusammenfassung zur Seite Nr. 2

WiebeTech LLC 3. Install your hard drive into the tray. Unlock the tray by using the plastic key. Slide the tray out of the outer casing. Remove the plastic spacer. Lay the drive into the frame of the removable tray, making sure it lays flat. Align the 4 screw positions then use the included screws (#6-32) to secure the drive into position. 4. Insert the tray into the SilverSATA I unit. Gently push the tray along the sliding track into the hard drive compartment and then

Inhaltszusammenfassung zur Seite Nr. 3

WiebeTech LLC Usage with Windows computers Compatibility The SilverSATA I Internal is fully plug-and-play with Windows 2000, XP, Server 2003, and Vista. No additional drivers are needed. However, the SATA host you are plugging into will probably require driver or firmware installation. Formatting Volumes Before you can use a brand new hard drive in your SilverSATA I Internal, you must first format the drive into a volume. Use Disk Management, which you can find by right-clic

Inhaltszusammenfassung zur Seite Nr. 4

WiebeTech LLC Technical Specifications Product name/code: SilverSATA I Internal Host Interfaces: SATA Data Interface Speeds: SATA 3.0GHz (up to 300MB/sec) • Empty 5 ¼” bay in a Windows or Linux-based PC Hardware Requirements: • internal power and SATA ports Drive Types Supported: 3.5” SATA (Serial-ATA) hard drives up to 750GB+ Hot-Swap Capable: Yes, if internal SATA host permits Operating Temperature: 50 – 85° Fahrenheit (10 – 30° Celsius) Operating Humidity: 5% to 95%, nonc