Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
Inhaltszusammenfassung zur Seite Nr. 3
Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN60950-1: 2006 Safety of Information Technology Equipment EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300GHz)
Inhaltszusammenfassung zur Seite Nr. 4
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, TRENDnet, declares that this TEW-649UB is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente TRENDnet declara que el TEW-649UB cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟ ΥΣΑ TRENDnet ΔΗΛ
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENT Introduction .............................................................................................................. 5 Unpacking and Setup ................................................................................................ 6 Unpacking ............................................................................................................... 6 System Requirements ..........................................................................................
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Congratulations on your purchase of this Wireless N USB Adapter. This manual contains detailed instructions regarding the operation of this product. Please keep this manual for future reference. With the Wireless N USB Adapter, a desktop or laptop computer can communicate with another computer wirelessly. An easy‐to‐use utility is bundled with the Wireless USB Adapter for configuration, monitoring, and diagnostic purposes. The Wireless N USB Adapter can wirelessl
Inhaltszusammenfassung zur Seite Nr. 7
UNPACKING AND SETUP This section provides unpacking and setup information for the Wireless N USB Adapter. Unpacking The box should contain the following items: TEW‐649UB Wireless N USB Adapter Multi‐Language Quick Installation Guide CD‐ROM (Utility & Driver) If any item is found missing or damaged, please contact your local reseller for replacement. System Requirements Before installation, check the following: Make sure your computer is running at least a 300MHz or above proces
Inhaltszusammenfassung zur Seite Nr. 8
IDENTIFYING EXTERNAL COMPONENTS LED LED Status Description When the LED is blinking, the WLAN Adapter is transmitting or receiving data Slow Blink (1 blink/second) on the Wireless Ethernet network. After pressing the WPS button, the LED will flash 3 blinks/second. Once the connection is successfully established between the AP and the adapter, the LED Fast Blink (3 blinks/second) will remain solid for 5 seconds to tell the users that the connection has been established. After 5 secon
Inhaltszusammenfassung zur Seite Nr. 9
WIRELESS PERFORMANCE CONSIDERATIONS There are a number of factors that can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. 2. Keep the number of obstructions to a minimum. Each obstruction can reduce the range of a wireless device. Position the wireless devices in a manner that will minimize the amount of ob
Inhaltszusammenfassung zur Seite Nr. 10
SOFTWARE INSTALLATION This section describes how to install the driver and utility for the Wireless N USB Adapter. Windows Based Utility Installation 1) Insert the Utility and Driver CD‐ROM into your computer’s CD‐ROM drive and then click Install Utility. 2) Follow the InstallShield Wizard Instructions 9
Inhaltszusammenfassung zur Seite Nr. 11
3) Click Finish. 4) Plug the Wireless N USB Adapter into an available USB slot on your computer. Driver Installation Windows Vista 1) Drivers will install automatically. Windows XP 1) The Found New Hardware Wizard appears Select No, not this time and then click Next. 10
Inhaltszusammenfassung zur Seite Nr. 12
2) Select Install this software automatically (recommended and then click Next. 11
Inhaltszusammenfassung zur Seite Nr. 13
3) Click Continue Anyway. 4) Click Finish. 12
Inhaltszusammenfassung zur Seite Nr. 14
Windows 2000 1) Click Yes. 13
Inhaltszusammenfassung zur Seite Nr. 15
WIRELESS UTILITY SETTING The user can configure the wireless settings using the Wireless Adapter Configuration Utility. Double‐click the utility icon that appears in the taskbar. The Wireless Adapter Configuration Utility is divided into six sections: Link Info, Configuration, Site Survey, Profile, WPS and About. Link Information This is the default screen after launching the Utility program. Status: Shows the associated BSSID (MAC address), which can be used to identify the
Inhaltszusammenfassung zur Seite Nr. 16
Channel: Shows the current channel for communication. Link Quality: Shows the link quality of the Wireless N USB Adapter with the Access Point when operating under Infrastructure mode. Signal Strength: Shows the wireless signal strength of the connection between the Wireless N USB Adapter with the Access Point. Data Rate: Shows the statistics of data transfer, and the calculation is based on the number of packets transmitted and received. Configuration This screen is where you set the
Inhaltszusammenfassung zur Seite Nr. 17
● Infrastructure – to establish wireless communication with the LAN and other wireless clients through the use of Access Points or Wireless Router. This is most common type of connection. ● Ad‐Hoc – to establish point‐to‐point wireless communication directly with other wireless client devices. Authentication: The following options are available: Open System, Shared Key, WPA‐PSK, WPA2‐PSK, WPA EAP‐TLS, WPA2 EPA‐TLS . Select Open System, Shared Key for WEP data encryption feature. Open
Inhaltszusammenfassung zur Seite Nr. 18
WPA‐PSK / WPA2‐PSK If using the WPA‐PSK/WPA2‐PSK authentication method, please select the Encryption type for TKIP or AES then enter the Passphrase key. The minimum length is 8 characters. 17
Inhaltszusammenfassung zur Seite Nr. 19
WPA EAP‐TLS If using the WPA/WPA2 EAP‐TLS authentication method, please select the Encryption type for TKIP or AES then select the WPA/WPA2 Certificate from drop down list. 18
Inhaltszusammenfassung zur Seite Nr. 20
Site Survey This screen allows the user to scan for available wireless network. It also allows the user to establish wireless communications with an target device. Available Network – displays the wireless networks (wireless clients, access points or routers) that are within range. Select any one of the wireless networks by double‐clicking on it or select the SSID then click the “Connect” button. Click the “Refresh” button to scan for available networks. 19
