Inhaltszusammenfassung zur Seite Nr. 1
USB to Serial Adapter Hub
(ID-SC0511-S1/ID-SC0611-S1/ID-SC0711-S1/ID-SC0811-S1)
1
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Statement No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. Disclaimer Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no even
Inhaltszusammenfassung zur Seite Nr. 3
1. Introduction USB-to-Serial converter provides an easy solution connection serial port as needed for systems. USB-to-Serial functions as a converter between a USB port and standard serial ports. We can easily connect this converter to the USB port on your PC or USB hub and get access to any RS-232 devices such as PDAs, scanners, printers, etc. This device is suitable for portable devices, equipments, sales-end applications. Features Compliant with USB 2.0 specification,Hi-Speed U
Inhaltszusammenfassung zur Seite Nr. 4
System Requirement IBM compatible computer or Mac Windows 2000, Windows XP, Windows Vista 32/64-bit, Windows 7, Mac 10.x An available USB port 64 MB RAM or higher Pentium 233 MHz or higher 4
Inhaltszusammenfassung zur Seite Nr. 5
2. Specifications 1xRS-232 (ID-SC0511-S1) 2xRS-232 (ID-SC0611-S1) Serial Ports 4xRS-232 (ID-SC0711-S1) 8xRS-232 (ID-SC0811-S1) DB9 male (ID-SC0511-S1/SC0311-S1/SC0411-S1) Connectors 8-pin RJ-45 (ID-SC0811-S1) FIFO Buffers 512 bytes ESD Protection 15 KV ESD Serial Communication Speed 50 b/s ~ 921.6Kb/s Interface USB 2.0 Interface Connector USB-B female Bus-Power (ID-SC0511-S1/SC0311-S1/SC0411-S1) Power Requirements 5V/3A DC (ID-SC0811-S1) Operation Temperature 0℃ to 55℃ Operatin
Inhaltszusammenfassung zur Seite Nr. 6
USB to 1-port RS-232 Hub Hardware Dimension 100mm 6
Inhaltszusammenfassung zur Seite Nr. 7
Hardware Introduction 7
Inhaltszusammenfassung zur Seite Nr. 8
USB to 2-port RS-232 Hub Hardware Dimension 8
Inhaltszusammenfassung zur Seite Nr. 9
Hardware Introduction 9
Inhaltszusammenfassung zur Seite Nr. 10
USB to 4-port RS-232 Hub Hardware Dimension 10
Inhaltszusammenfassung zur Seite Nr. 11
Hardware Introduction 11
Inhaltszusammenfassung zur Seite Nr. 12
USB to 8-port RS-232 Hub Hardware Dimension 12
Inhaltszusammenfassung zur Seite Nr. 13
Hardware Introduction RJ45 to RS-232 Cable (ID-SC0811-S1 only) 13
Inhaltszusammenfassung zur Seite Nr. 14
RJ45 Pin Assignment 3. Installation On Windows 2000/ Windows XP/ Windows Vista / Windows 7 Note: DO NOT connect the Serial to USB Device to computer before installing the driver. 1. Please insert the provided CD into CD-ROM and click driver setup file to install. 14
Inhaltszusammenfassung zur Seite Nr. 15
2. Please click “Finish” to process driver installation. When the installation completed, please connect the USB to Serial Converter to available USB port. 15
Inhaltszusammenfassung zur Seite Nr. 16
Installation Verification To verify your installation, please launch Device Manager as following: Under Windows 2000/ Windows XP operating system: Right-Click My Computer and select Properties > System > (Hardware) > Device Manager. Under Windows Vista / Windows 7 operating system: Right-Click My Computer and select Properties > Device Manager The High-Speed USB Serial Port should be displayed under the Ports (COM & LPT) group. 16
Inhaltszusammenfassung zur Seite Nr. 17
On Mac OS X Support Mac Driver Installation: Mac OS X v10.1 and later for PowerPC Mac Mac OS X v10.4 and later for Intel Mac Installation: 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Driver\Mac\Mac_OS X 10.x\/MCS7840InstallDisk 10.4 zip. Please extract the zip file first. 2. Please click “Continue” to install driver. 17
Inhaltszusammenfassung zur Seite Nr. 18
3. When the screen below appears, please choose the destination volume that you want to install and click Continue. 4. Please click “Install” to perform a basic installation. 18
Inhaltszusammenfassung zur Seite Nr. 19
5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted. 7. Please click Restart to reboot the Mac. 19
Inhaltszusammenfassung zur Seite Nr. 20
8. Please connect the device to available USB port to your Mac. 9. Installation Verification: Please key in “kextstat” to terminal bash. When above dialog box appears, it means the driver installation has been installed successfully. 20
