Inhaltszusammenfassung zur Seite Nr. 1
Product Manual
SV35.3 Series Serial ATA
ST31000340SV
ST3750330SV
ST3500320SV
ST3250310SV
100480760
Rev. B
February 2008
Inhaltszusammenfassung zur Seite Nr. 2
Revision history Revision Date Sheets affected or comments Rev. A 10/29/07 Initial release. Rev. B 02/13/08 4, 6-7, 9-10, 12 and 14. Copyright © 2007-2008 Seagate Technology LLC. All rights reserved. Printed in U.S.A. Publication number: 100480760, Rev. B February 2008 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. SV35.3 Series, SeaTools and SeaTDD are either trademarks or registered trademarks of
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Specification summary tables . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
ii SV35.3 Series Serial ATA Product Manual, Rev. B
Inhaltszusammenfassung zur Seite Nr. 5
List of Figures Figure 1. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Figure 3. Mounting dimensions—top, side and end view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 SV35.3 Series Serial ATA Product Manual, Rev. B iii
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® SV35.3 Series Serial ATA model drives: ST31000340SV ST3750330SV ST3500320SV ST3250310SV These drives provide the following key features: � High instantaneous (burst) data-transfer rates (up to 300 Mbytes per second). � Perpendicular recording heads and EPRML technology, for increased areal density. � State-of-the-art cache and on-the-fly error-correction algorithms. � Nati
Inhaltszusammenfassung zur Seite Nr. 8
1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include: � Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jump- ers or other configuration options. � Thinner and more flexible cabling for improved enclosure airflow and ease of installation. � Scalability to higher performance levels. In addition, Serial ATA makes the transition f
Inhaltszusammenfassung zur Seite Nr. 9
2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST31000340SV ST3750330SV ST3500320SV ST3250310SV 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measure- ment or definition, see the appropriate s
Inhaltszusammenfassung zur Seite Nr. 10
Table 1: Drive specifications summary for 1000, 750 and 500 Gbyte models Drive specification ST31000340SV ST3750330SV ST3500320SV Formatted capacity (512 bytes/sector)* 1000 Gbytes 750 Gbytes 500 Gbytes Guaranteed sectors 1,953,525,168 1,465,149,168 976,773,168 Heads 8 6 4 Discs 4 3 2 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1,090 kbits/in max Track density 150 ktracks/in avg 2 Areal density 164 Gbits/in avg Interna
Inhaltszusammenfassung zur Seite Nr. 11
Drive specification ST31000340SV ST3750330SV ST3500320SV Vibration, nonoperating 5–22 Hz: 2.0 Gs, Limited displacement 22–350 Hz: 5.0 Gs 350–500 Hz: 2.0 Gs Drive acoustics, sound power Idle** 2.7 bels (typical) 2.9 bels (max) CE Seek 2.8 bels (typical) 3.0 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.80% Warranty To determine the warranty for a specific drive, use a web browser to access the follow- ing web page: http://www.seagate.com
Inhaltszusammenfassung zur Seite Nr. 12
Table 2: Drive specifications summary for 250 Gbyte models Drive specification ST3250310SV Formatted capacity (512 bytes/sector)* 250 Gbytes Guaranteed sectors 488,397,168 Heads 2 Discs 1 Bytes per sector 512 Default sectors per track 63 Default read/write heads 16 Default cylinders 16,383 Recording density 1,049 kbits/in max Track density 155 ktracks/in avg 2 Areal density 163 Gbits/in avg Internal data transfer rate 1,212 Mbits/sec max Sustained data transfer rate OD 106 Mbytes/sec max I/O da
Inhaltszusammenfassung zur Seite Nr. 13
Drive specification ST3250310SV Vibration, nonoperating 5–350 Hz: 5.0 Gs 350–500 Hz: 1.0 Gs Drive acoustics, sound power Idle** 2.5 bels (typical) 2.8 bels (max) CE Seek Profile 2.6 bels (typical) 2.8 bels (max) 14 Nonrecoverable read errors 1 per 10 bits read Annualized Failure Rate (AFR) 0.80% Warranty To determine the warranty for a specific drive, use a web browser to access the follow- ing web page: www.seagate.com/support/service/ From this page, click on the “Verify Your W
Inhaltszusammenfassung zur Seite Nr. 14
2.2 Formatted capacity Formatted Guaranteed Model capacity* sectors Bytes per sector ST31000340SV 1000 Gbytes 1,953,525,168 512 ST3750330SV 750 Gbytes 1,465,149,168 512 ST3500320SV 500 Gbytes 976,773,168 512 ST3250310SV 250 Gbytes 488,397,168 512 *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives in LBA mode, all blocks (sectors) are consec
Inhaltszusammenfassung zur Seite Nr. 15
2.4 Recording and interface technology Models ST31000340SV, ST3750330SV & ST3500320SV ST3250310SV Interface Serial ATA (SATA) Recording method Perpendicular Recording density (kbits/inch max) 1,090 1,049 Track density (ktracks/inch avg) 150 155 2 Areal density (Gbits/inch avg) 164 163 Internal data transfer rate (Mbits/sec max) 1,287 1,212 Sustained data transfer rate (Mbytes/sec max) 105 106 I/O data-transfer rate (Mbytes/sec max) 300 2.5 Physical characteristics Drive specification Maximum h
Inhaltszusammenfassung zur Seite Nr. 16
2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows: � Track-to-track seek time is an average of all possible single-track seeks in both directions. � Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead. *Typical seek times (msec) Read Write Track-to-track (1000,
Inhaltszusammenfassung zur Seite Nr. 17
2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 1 on page 24. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. • Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operat
Inhaltszusammenfassung zur Seite Nr. 18
Table 3: DC power requirements Power dissipation (1TB models) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup — — 2.0 (peak) Idle* 8.22 0.34 0.54 Operating (CE seek profile) 9.78 0.39 0.65 Standby 1.38 0.19 0.04 Sleep 1.38 0.19 0.04 Power dissipation (750GB model) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps Spinup — — 2.0 (peak) Idle* 7.24 0.32 0.47 Operating (CE seek profile) 8.18 0.40 0.52 Standby 1.24 0.16 0.04 Sleep 1.24 0.16 0.04 Power dissipation (500GB model) Avg
Inhaltszusammenfassung zur Seite Nr. 19
2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. � Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. � Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Note. Equival
Inhaltszusammenfassung zur Seite Nr. 20
2.8.4 Power-management modes The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes: Power modes Heads Spindle Buffer Active Tracking Rotating Enabled Idle Tracking Rotating Enabled Standby Parked Stopped Enabled Sleep Parked Stopped Disabled � Active mode The drive is in Active mode during the read/write and seek operation
