Inhaltszusammenfassung zur Seite Nr. 1
Product Manual
®
Savvio 10K.2 SAS
ST9146802SS
ST973402SS
100384760
Rev. D
August 2007
Inhaltszusammenfassung zur Seite Nr. 2
©2007, Seagate Technology LLC All rights reserved. Publication number: 100384760, Rev. D August 2007 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Savvio, SeaTools and SeaTDD are either trademarks or regis- tered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of the
Inhaltszusammenfassung zur Seite Nr. 3
Contents 1.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Applicable standards and reference documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1.1 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
6.4.2 Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 6.4.3 Effective altitude (sea level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 6.4.4 Shock and vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 6.4.5 Air cleanliness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 6.4.6 Corro
Inhaltszusammenfassung zur Seite Nr. 5
List of Figures Figure 1. Savvio 10K.2 SAS disc drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Figure 2. ST9146802SS current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 3. ST973402SS current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 4. ST9146802SS (3 Gbit) DC current and power vs. input/outpu
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
1.0 Scope ® ® This manual describes Seagate Technology LLC, Savvio 10K.2 SAS (Serial Attached SCSI) disc drives. Savvio drives support the SAS Protocol specifications to the extent described in this manual. The SAS Inter- face Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. Figure 1. Savvio 10K.2 SAS disc drive Savvio 10K.2 SAS Product Manual, Rev. D 1
Inhaltszusammenfassung zur Seite Nr. 8
2 Savvio 10K.2 SAS Product Manual, Rev. D
Inhaltszusammenfassung zur Seite Nr. 9
2.0 Applicable standards and reference documentation The drive has been developed as a system peripheral to the highest standards of design and construction. The drive depends on its host equipment to provide adequate power and environment for optimum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regulation. In particular, the drive
Inhaltszusammenfassung zur Seite Nr. 10
2.1.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance with the directives/standards for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include: � Typical current use microprocessor � 3.5-inch floppy disc drive � Keyboard � Monitor/display �Printer � External modem �Mouse Although the test
Inhaltszusammenfassung zur Seite Nr. 11
2.1.3 European Union Restriction of Hazardous Substances (RoHS) The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical substances, including Lead (Pb), in electronic products effective July 2006. A number of parts and materials in Seagate products are procured from external suppliers. We rely on the rep- resentations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our supplier contracts require complia
Inhaltszusammenfassung zur Seite Nr. 12
6 Savvio 10K.2 SAS Product Manual, Rev. D
Inhaltszusammenfassung zur Seite Nr. 13
3.0 General description Savvio drives combine Tunneling Magnetoresistive (TMR) heads and a Serial Attached SCSI (SAS) interface to provide high performance, high capacity data storage for a variety of systems including engineering worksta- tions, network servers, mainframes, and supercomputers. The Serial Attached SCSI interface is designed to meet next-generation computing demands for performance, scalability, flexibility and high-density storage requirements. Savvio drives are random access
Inhaltszusammenfassung zur Seite Nr. 14
3.1 Standard features Savvio drives have the following standard features: � Perpendicular recording technology � 1.5 / 3 Gbit Serial Attached SCSI (SAS) interface � Integrated dual port SAS controller supporting the SCSI protocol � Support for SAS expanders and fanout adapters � Firmware downloadable using the SAS interface � 128 - deep task set (queue) � Supports up to 32 initiators � Jumperless configuration. � User-selectable logical block size (512, 520, or 528 bytes per logical block). � In
Inhaltszusammenfassung zur Seite Nr. 15
3.4 Reliability � Annualized Failure Rate (AFR) or 0.55% � Mean time between failures (MTBF) of 1,600,000 hours � Balanced low mass rotary voice coil actuator � Incorporates industry-standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.) � 5-year warranty 3.5 Formatted capacities Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block s
Inhaltszusammenfassung zur Seite Nr. 16
3.8 Factory-installed options You may order the following items which are incorporated at the manufacturing facility during production or packaged before shipping. Some of the options available are (not an exhaustive list of possible options): � Other capacities can be ordered depending on sparing scheme and sector size requested. � Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection against transit damage. Units shipped individually require
Inhaltszusammenfassung zur Seite Nr. 17
4.0 Performance characteristics This section provides detailed information concerning performance-related characteristics and features of Sav- vio drives. 4.1 Internal drive characteristics ST9146802SS ST973402SS Drive capacity 146.8 73.4 Gbytes (formatted, rounded off value) Read/write data heads 4 2 Bytes per track 489,984 489,984 Bytes (average, rounded off values) Bytes per surface 36,704 36,704 Mbytes (unformatted, rounded off value) Tracks per surface (total) 75,373 75,373 Tracks (user acc
Inhaltszusammenfassung zur Seite Nr. 18
4.2.2 Format command execution time for 512-byte sectors (minutes) ST9146802SS ST973402SS 104 52 Maximum (with verify) 70 35 Maximum (without verify) 4.2.3 General performance characteristics Minimum sector interleave 1 to 1 Data buffer to/from disc media (one 512-byte logical block)* 82 to 132 MBytes/sec Sustained transfer rate 55 to 89 Mbytes/sec SAS Interface maximum instantaneous transfer rate 300 Mbytes/sec* per port (dual port = 600 Mbytes/sec*) Logical block sizes 512 (default), 520 or
Inhaltszusammenfassung zur Seite Nr. 19
4.3 Start/stop time The drive accepts the commands listed in the SAS Interface Manual less than 3 seconds after DC power has been applied. If the drive receives a NOTIFY (ENABLE SPINUP) primitive through either port and has not received a START STOP UNIT command with the START bit equal to 0, the drive becomes ready for normal operations within 20 seconds (excluding the error recovery procedure). If the drive receives a START STOP UNIT command with the START bit equal to 0 before receiving a
Inhaltszusammenfassung zur Seite Nr. 20
Case B—A Read command requests data, and at least one requested logical block is not in any segment of the cache: 1. The drive fetches the requested logical blocks from the disc and transfers them into a segment, and then from there to the host in accordance with the Mode Select Disconnect/Reconnect parameters, page 02h. 2. If the prefetch feature is enabled, refer to section 4.5.2 for operation from this point. Each cache segment is actually a self-contained circular buffer whose length is an
