Inhaltszusammenfassung zur Seite Nr. 1
Product Manual
®
Pipeline HD
ST2000VM003
ST1000VM002
100633414
Rev. F
May 2012
Inhaltszusammenfassung zur Seite Nr. 2
Document Revision History Revision Date Description of changes Rev. A 07/12/2010 Initial release. Rev. B 01/07/2011 Added to the feature list; updated specifications. Added updated AFR and warranty info; added AFR section. Updated words 88 Rev. C 04/25/2011 and 89 in Table 7. Rev. D 08/04/2011 Added 1TB model and related specifications. Rev. E 03/25/2012 Added 2TB model and related specifications. Updated Table 2 (DC power requirements); clarified temperature description (Table 1 Rev. F 05/03/2
Inhaltszusammenfassung zur Seite Nr. 3
Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 About the Serial ATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.0 Drive Specifications . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Pipeline HD SATA Product Manual, Rev. F
Inhaltszusammenfassung zur Seite Nr. 5
Figures Figure 1 Typical Current Profiles (5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 2 Typical Current Profiles (12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 3 Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Figure 4 Mounting dimensions (2TB model) . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Pipeline HD SATA Product Manual, Rev. F
Inhaltszusammenfassung zur Seite Nr. 7
Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding data recovery services, visit http://www.i365.com For
Inhaltszusammenfassung zur Seite Nr. 8
8 Pipeline HD SATA Product Manual, Rev. F
Inhaltszusammenfassung zur Seite Nr. 9
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Pipeline HD SATA model drives: ST2000VM003 ST1000VM002 These drives provide the following key features: � 5900 RPM spindle speed � High instantaneous (burst) data-transfer rates with a default of 6Gb/s for ST1000VM002 and ST2000VM003 models. Limit settings for 1.5Gb/s and 3.0Gb/s are available via S.M.A.R.T. Command Transport command. � Support for S.M.A.R.T. drive monitor
Inhaltszusammenfassung zur Seite Nr. 10
Introduction www.seagate.com In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work as normal. The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA dev
Inhaltszusammenfassung zur Seite Nr. 11
2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST2000VM003 ST1000VM002 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Tabl
Inhaltszusammenfassung zur Seite Nr. 12
Drive Specifications www.seagate.com Table 1 Drive specifications summary for 2TB and 1TB models (continued) Drive Specification ST2000VM003 ST1000VM002 <17s <6s Standby to ready (max) <1.0ms read; <1.0ms read; Track-to-track seek time (typical) <1.2ms write <1.2ms write <8.5ms read; <8.5ms read; Average seek (typical) <9ms write <9ms write 2.0A 2.0A Startup current (typical) 12V (peak) 5V: ± 5% 5V: ± 5% Voltage tolerance 12V: ±10% 12V: ±10% (including noise) 0° to 75°C Operating temperature (
Inhaltszusammenfassung zur Seite Nr. 13
www.seagate.com Drive Specifications 2.2 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors 4096 ST2000VM003 2TB 3,907,029,168 (512 bytes per sector emulated at the interface) 4096 ST1000VM002 1TB 1,953,525,168 (512 bytes per sector emulated at the interface) * One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode Wh
Inhaltszusammenfassung zur Seite Nr. 14
Drive Specifications www.seagate.com 2.5 Physical characteristics Maximum height 2TB model 26.1mm / 1.028 in 1TB model 20.20mm / 0.795 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 147.00mm / 5.78 in Typical weight 2TB model 535g / 1.18 lb 1TB model 415g / 0.915 lb Cache buffer 64MB (65,536kb) 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defin
Inhaltszusammenfassung zur Seite Nr. 15
www.seagate.com Drive Specifications 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. (Refer to Figure 3 ). 2.8.1 Power consumption Power requirements for the drives are listed in Table 2 on page 15. Typical power measurements are based on an average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient temperature. � Spinup power Spinup power is measured from the time of power-on to the time that
Inhaltszusammenfassung zur Seite Nr. 16
Drive Specifications www.seagate.com Figure 1 Typical Current Profiles (5V) Figure 2 Typical Current Profiles (12V) 16 Pipeline HD SATA Product Manual, Rev. F
Inhaltszusammenfassung zur Seite Nr. 17
www.seagate.com Drive Specifications 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12V line or an equivalent 15-ohm resistive load on the +5V line. � Using 12V power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10MHz. � Using 5V power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 1
Inhaltszusammenfassung zur Seite Nr. 18
Drive Specifications www.seagate.com 2.9 Environmental specifications 2.9.1 Drive case temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Drive case temperature should be measured at the location indicated in Figure 4. Operating (drive case temperature) 0° to 75°C (32° to 167°F) Nonoperating (ambient) –40° to 70°C (–40° to 158°F) 2.9.2 Temperature gradient Operating 20°C per hour (68°F per hour max), without condensation Nonoper
Inhaltszusammenfassung zur Seite Nr. 19
www.seagate.com Drive Specifications 2.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis, with linear swept sine inputs. 2.9.6.1 Operating vibration The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below. 2Hz to 22Hz 0.25 Gs (Limited displacement) 22Hz to 350Hz
Inhaltszusammenfassung zur Seite Nr. 20
Drive Specifications www.seagate.com 2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equatio
