Inhaltszusammenfassung zur Seite Nr. 1
PH5-13R-35D
Portable Air Conditioner with Heat Pump
Operating Instructions
3092402
PH5-13R-35D
© 2010 Soleus Air International
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for choosing a Soleus Air PH5 Series Portable Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Portable Air Conditioner. For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location, d
Inhaltszusammenfassung zur Seite Nr. 3
PACKAGE CONTENTS Portable Air Conditioner Exhaust Hoses (2) Hose Adapters (2) Window Kit Adapter (2) Remote Control AAA Batteries (2) Window Kit - 3 Sliding Panels Air Outlet Covers (2) Owner’s Manual SPECIFICATIONS • The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F. • The operational ambient temperature is between 23°F ~ 109°F. • Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mod
Inhaltszusammenfassung zur Seite Nr. 4
LCDI POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side. The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either
Inhaltszusammenfassung zur Seite Nr. 5
PRODUCT DIAGRAM Control Panel and LED display Louvers Air Filter Compartment and Air Intake Casters Remote Control and Holder Air Intake Exhaust Power Outlet Cord Wrap Drain Plug 5
Inhaltszusammenfassung zur Seite Nr. 6
PARTS & ASSEMBLY PARTS EXHAUST HOSES (2 Included) WINDOW KIT EXHAUST HOSE HOSE ADAP HOSE ADAP HOSE ADAPTER TER TER WINDOW KIT ADAPTER WINDOW KIT ASSEMBLY & INSTALLATION INSTALLATION When the unit is operating as an air conditioner, heater, or dehumidifier, the unit draws in fresh outdoor air and exhausts hot air (or cold air in heat mode) out of the room to complete the air exchange. When the unit is operating in fan mode, no outdoor
Inhaltszusammenfassung zur Seite Nr. 7
VENTING KIT INSTALLATION NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and images show general directions for Soleus Air hose portable air conditioners. 7
Inhaltszusammenfassung zur Seite Nr. 8
WINDOW KIT ASSEMBLY 1.Parts: A) 2 Track Screws B) 2 Wing Nuts C1 & C2) 2 Hose Panels, one Exhaust Hose Openings D) 1 Sliding Track Panel 5. Next, take the other Hose Panel (C2) and connect it to Hose Panel (C1) by placing the Sliding Track Panel (D) over the Track Screw (A) on Hose Panel (C2). 2. Assembly: First, take the Track Screws (A) and screw one into each of the small holes found on the Hose Panels (C1 & C2). 6. The Hose Panels (C1 &C2) should now be connected using the
Inhaltszusammenfassung zur Seite Nr. 9
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL & LED CONTROL DISPLAY CONTROL PANEL TIMER TIME/TEMP DECREASE POWER TIME/TEMP INCREASE FAN SPEED MODE LED CONTROL DISPLAY LED CONTROL DISPLAY AUTO A/C DEHUM. FAN HEAT REMOTE RECEIVER TIMER ON TIMER OFF FAN SPEED TEMPERATURE AND TIMER INDICATOR OSCILLATION ON/OFF COMPRESSOR ON/OFF BUCKET FULL SLEEP MODE ON/OFF 9
Inhaltszusammenfassung zur Seite Nr. 10
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS CONTROL PANEL BUTTONS (Refer to the images on page 9) 1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER button once more to turn the unit off. 2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode, Air Conditioner, Dehumidifier, Fan only, and Heater mode. 3) Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds:
Inhaltszusammenfassung zur Seite Nr. 11
Heating Mode 1) Install the exhaust hose and window kit properly (see pages 7 & 8 ). 2) Plug the Power Cord into an electrical outlet. 3) Turn on the unit by pressing the POWER button on the control panel. 4) Press the MODE button until the “ “ icon appears on the control panel display. 5) Press the ▼or ▲ buttons until the desired room temperature appears on the control panel display. The ° ° ° ° temperature ranges from 61 F - 88 F (16 C - 31 C). 6) Select the fan speed by pressing the
Inhaltszusammenfassung zur Seite Nr. 12
° ° ° 68 F to 80 F. And Air Conditioner mode when the room temperature is above 80 F. Heating Mode when ° the room temperature is below 68 F . Sleep Mode (This mode can only be selected when using the Remote control ) 1) To set Sleep mode, make sure the unit is in Air Conditioner mode or Heating mode. 2) Press the SLEEP Button on the remote control. The “ ” icon appears on the control panel display. 3) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum.
Inhaltszusammenfassung zur Seite Nr. 13
OPERATING THE UNIT USING THE REMOTE CONTROL REMOTE CONTROL LCD DISPLAY MODE BUTTON POWER BUTTON FAN SPEED TEMP SETTING SWING (LOUVER OSCILLATION) TIMER ON SLEEP BUTTON TIMER OFF MINUTE SELECTER HOUR SELECTER * Remote color may differ from the image above. 13
Inhaltszusammenfassung zur Seite Nr. 14
REMOTE CONTROL OPERATING INSTRUCTIONS 1) Power On and Off - Press the POWER (I/O) button once to manually turn the unit on. Press the Power button once more to turn the unit off. When you press the POWER button the upper right square on the remote control LED Display will light up. When in Air Conditioner and Auto mode, the selected tempera- ture will appear on the remote control display. When the unit is in Fan mode and Dehumidifier mode you will see the “- -” icon instead of the set tem
Inhaltszusammenfassung zur Seite Nr. 15
MAINTENANCE Note: Make sure power is off and the power cord is not plugged into an electrical outlet prior to performing any maintenance on the unit. Clean or replace filter - If the air filter is blocked with a dust, the airflow volume may reduce. It is recommended to clean the filter once every two weeks or as needed. 1) Remove the filter from the filter compartment on the front of the unit. 2) Wash the air filter by immersing it gently into warm water with a neutral detergent
Inhaltszusammenfassung zur Seite Nr. 16
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air PH5 Series Portable Air Conditioner to be free of de- fects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of charge within a reaso
