Bedienungsanleitung Rosewill RX358

Inhaltszusammenfassung zur Seite Nr. 1

[ RX358 Series ]










3.5" SATA HDD to USB & eSATA
Ext. Enclosure w/Int.80mm fan
User Manual

Inhaltszusammenfassung zur Seite Nr. 2

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual FEATURES • Support up to 1000GB � Front Panel Light beam affiliated Power ON/OFF switch � Power On/Off for internal cooling fan � OS Supports Win2000/ME/XP/VISTA, and Mac OS 8.6/9.x/10.x and above and Linux kernel after 2.4.1.0 � Power: 100~240 AC Adapte r with 12V/DC output � SATA to USB 2.0, backward compatible to USB 1.1 � Plug & Play and

Inhaltszusammenfassung zur Seite Nr. 3

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual Enclosure Figure Description Front View A B Rear View C G D E F A. Ventilation design 1 B. Ventilation design 2 C. Fan Switch D. Power Switch E. Power Jack F. USB Port G. eSATA Port 2

Inhaltszusammenfassung zur Seite Nr. 4

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual User Assembly Guide Please follow the instructions and make sure your HDD is successfully installed to the mobile disk! STEP1: Release the 4 screws, and then remove the bottom aluminum cover. 3

Inhaltszusammenfassung zur Seite Nr. 5

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual STEP2: Release 2 screws from back panel, and then slide out the side plates. STEP3: Place HDD into the enclosure properly. Connect HDD to SATA connector. 4

Inhaltszusammenfassung zur Seite Nr. 6

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual STEP4: Tight up 4 screws from side to side. STEP5: Reassemble two side plates back to the enclosure and fix the screws. 5

Inhaltszusammenfassung zur Seite Nr. 7

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual STEP6: Replace the aluminum cover back and tight up 4 screws. Attention 1. Make sure HDD does not dash the leaves of fan during assembly. 2. Please leave at least 5cm from air intake ventilator. 6

Inhaltszusammenfassung zur Seite Nr. 8

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual HDD Formatting Guide You may format your external HDD through USB2.0 connection. Please make sure your external HDD is turned on and well connected to the PC before formatting the HDD. STEP1: Right-click “My Computer” icon and select the “Manage” column. STEP2: Select “Disk Management” and you will see your External HDD showed “Unallocate

Inhaltszusammenfassung zur Seite Nr. 9

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual STEP3: Right-click on the “Unallocated” blocks and selects “New Partition”. STEP4: The “New Partition Wizard” will appear. Please follow the instruction of the wizard to complete. 8

Inhaltszusammenfassung zur Seite Nr. 10

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual STEP5: When new partition is completed, the external HDD will be recognized as a “New Volume”. STEP6: Double-click “My Computer”. You will see the new volume appears on your PC. 9

Inhaltszusammenfassung zur Seite Nr. 11

3.5" SATA HDD to USB & eSATA Ext. Enclosure w/Int.80mm fan [ RX358 Series ] User Manual NOTICE Questio n ：Does this SATA enclosure support hot swap? Answe r ：Yes, but it depends on the motherboard you have. 1. If your motherboard has an eSATA port in the Back I/O Connectors Panel as shown in picture # 1 your hot-swap function is supported and there is no need to install the eSATA bracket. All you need is connecting the enclosu