Bedienungsanleitung Maxtor MaxAttach NAS 6000

Inhaltszusammenfassung zur Seite Nr. 1

MaxAttach NAS 6000
MaxAttach NAS 6000
Quick Start Card
Quick Start Card
This Quick Start Card is only for a single MaxAttach NAS 6000 Base Unit
enclosed within a cabinet or a single rack-mountable Base Unit. For other
configurations, see the MaxAttach NAS 6000 Installation and Configuration Guide
on the enclosed MaxAttach NAS 6000 Installation and Documentation CD.
Welcome to the
MaxAttach NAS 6000
Thank you for choosing a MaxAttach NAS
6000 system. Take a moment to verify the
contents in

Inhaltszusammenfassung zur Seite Nr. 2

Documentation:
Quick Start Card
MaxAttach NAS 6000 End User License Agreement (EULA)
MaxAttach NAS 6000 Release Notes
MaxAttach NAS 6000 Installation and Documentation CD containing:
MaxNeighborhood Discovery and Setup Wizard application
MaxAttach NAS 6000 Documentation
Standalone O/S Help Files 1: Unit Information Please record the following information from your system:
Model Number:_______________________________
Serial Number:________________________________ 2: Installation

Inhaltszusammenfassung zur Seite Nr. 3

4: Reseat All Hard Disk Drives Reseat each hard drive to make sure shipping vibration has not dislodged them. Be sure to replace the drive in its original as-shipped Drive Bay. 1. Press down on the Ejector Tab and lift up on the Ejector Lever. 2. Pull the drive out of its Drive Bay (now is a good time to record the drive type and serial number) and then replace the drive in its Drive Bay until it begins to engage the connector. Close the Ejector Lever to lock in place. 5: Power Up Your Syste

Inhaltszusammenfassung zur Seite Nr. 4

4. Click on Apply to commit the changes. The server will automatically reboot. 5. Close the Change Settings window. After the system has rebooted, press the Refresh button. 6. The factory default server name will begin with the letters “MA.” In the MaxNeighborhood window, double-click on the default server name. Your web browser will launch and display a login screen. 7. Enter the login name “Administrator” (without the quotes) and leave the password blank. Select the “Administer this serv