Inhaltszusammenfassung zur Seite Nr. 1
®
Intel Solid-State Drive DC S3500 Series
Product Specification
Capacity: Power Management
7
− 2.5-inch: 80/120/160/240/300/480/600/800 GB − 2.5 inch: 5 V or 12 V SATA Supply Rail
− 1.8-inch: 80/240/400/800 GB − 1.8 inch: 3.3 V SATA Supply Rail
Components: − SATA Interface Power Management
®
− Intel 20nm NAND Flash Memory − OS-aware hot plug/removal
− Multi-Level Cell (MLC) − Enhanced power-loss data protection
Form Factor: 2.5–inch and 1.8-inch Power
1,2
Inhaltszusammenfassung zur Seite Nr. 2
Intel® Solid-State Drive DC S3500 Ordering Information Contact your local Intel sales representative for ordering information. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS A
Inhaltszusammenfassung zur Seite Nr. 3
Intel® Solid-State Drive DC S3500 Contents Revision History ..............................................................................................................................4 Terms and Acronyms .......................................................................................................................4 1.0 Overview .............................................................................................................................6 2.0 Product Specifi
Inhaltszusammenfassung zur Seite Nr. 4
Intel® Solid-State Drive DC S3500 Revision History Date Revision Description April 2013 001 Initial release. 1. Random write IOPS consistency changes from 75% to 80% June 2013 002 2. Added read power in table 8, 9 and 11 3. Added X,Y, Z dimension in section 3.0 1. Updated Section 5.4.1 Timed Workload Endurance Indicators with user notes December 2013 003 2. Updated Table 6 notes 3. Updated Table 23 Terms and Acronyms Term Definition ATA Advanced Technology Attachment CRC Cyclic
Inhaltszusammenfassung zur Seite Nr. 5
Intel® Solid-State Drive DC S3500 Term Definition Self-Monitoring, Analysis and Reporting Technology An open standard for developing hard drives and software systems that automatically monitors the SMART health of a drive and reports potential problems. SSD Solid-State Drive TB Terabyte TYP Typical UBER Uncorrectable Bit Error Rate December 2013 Product Specification 328860-002US 5
Inhaltszusammenfassung zur Seite Nr. 6
Intel® Solid-State Drive DC S3500 1.0 Overview ® This document describes the specifications and capabilities of the Intel SSD DC S3500. ® The Intel SSD DC S3500 delivers leading performance and Quality of Service combined with world-class reliability for Serial Advanced Technology Attachment (SATA)-based computers in nine capacities: 80 GB, 120 GB, 160 GB, 240 GB, 300 GB, 400 GB, 480 GB, 600 GB and 800 GB. ® By combining 20nm Intel NAND Flash Memory technology with SATA 6Gb/s interface
Inhaltszusammenfassung zur Seite Nr. 7
Intel® Solid-State Drive DC S3500 2.0 Product Specifications 2.1 Capacity Table 1. User Addressable Sectors Unformatted Capacity Intel SSD DC S3500 (Total User Addressable Sectors in LBA Mode) 80 GB 156,301,488 120 GB 234,441,648 160 GB 312,581,808 240 GB 468,862,128 300 GB 586,072,368 400 GB 781,422,768 480 GB 937,703,088 600 GB 1,172,123,568 800 GB 1,562,824,368 Notes: 1 GB = 1,000,000,000 bytes; 1 sector = 512 bytes. LBA count shown represents total user storage capaci
Inhaltszusammenfassung zur Seite Nr. 8
Intel® Solid-State Drive DC S3500 Table 3. Random Read/Write IOPS Consistency Intel SSD DC S3500 4 Specification Unit 80GB 240GB 800GB 400GB 480 / (2.5/ 120GB 160GB (2.5”/ 300GB (2.5”/ (1.8”) 600 GB 1.8”) 1.8”) 1.8”) 2 Random 4 KB Read (up to) % 90 90 90 90 90 90 90 90 Random 4 KB Write (up to) % 80 80 80 80 80 80 80 80 3 Random 8 KB Read (up to) % 90 90 90 90 90 90 90 90 Random 8 KB Write (up to) % 80 80 80 80 80 80 80 80 Notes: 1. Performance measured using Iometer* w
Inhaltszusammenfassung zur Seite Nr. 9
Intel® Solid-State Drive DC S3500 Table 6. Quality of Service Intel SSD DC S3500 Queue Depth=1 Queue Depth=32 Specification Unit 80/120/160/ 300/400/480/ 80/120/160/ 300/400/480/ 240 GB 600/800 GB 240 GB 600/800 GB 3, 4 Quality of Service (99.9%) Reads ms 0.5 0.5 2 2 Writes ms 5 2 20 10 3,4 Quality of Service (99.9999%) Reads ms 10 5 10 5 Writes ms 10 10 30 30 Notes: 1. Device measured using Iometer. Latency measured using 4 KB (4,096 bytes) transfer size with Qu
Inhaltszusammenfassung zur Seite Nr. 10
Intel® Solid-State Drive DC S3500 Table 8. Power Consumption for 2.5-inch Form Factor (5V Supply) Intel SSD DC S3500 Specification Unit 80 GB 120 GB 160 GB 240 GB 300 GB 480 GB 600 GB 800 GB 1 Active Write - RMS Average W 1.8 2.0 2.3 2.9 3.5 4.3 4.5 5.0 2 2.0 2.4 2.7 3.2 3.9 5.2 5.5 7.3 Active Write - RMS Burst W 3 Active Read - RMS Average W 1.5 1.5 1.6 1.6 1.6 1.6 1.6 1.6 4 Active Read - RMS Burst W 1.8 2.2 2.5 2.8 3.0 3.3 3.4 3.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Idle W Not
Inhaltszusammenfassung zur Seite Nr. 11
Intel® Solid-State Drive DC S3500 Table 10. Operating Voltage and Power Consumption for 1.8-inch Form Factor Intel SSD DC S3500 Electrical Characteristics 80 GB 240 GB 400 GB 800 GB Operating Voltage for 3.3 V (±5%) Min 3.13 V Max 3.47 V Rise time (Max/Min) 1 s / 1 ms 2 Fall time (Min) 1 ms Noise level 300 mV pp 10 Hz – 100 KHz 500 mV pp 100 KHz – 20 MHz 3 Min Off time 500 ms 1
Inhaltszusammenfassung zur Seite Nr. 12
Intel® Solid-State Drive DC S3500 2.4 Environmental Conditions Table 12. Temperature, Shock, Vibration Temperature Range Case Temperature o Operating 0 – 70 C 1 o Non-operating -55 – 95 C 2 Temperature Gradient o Operating 30 C/hr (Typical) o Non-operating 30 C/hr (Typical) Humidity Operating 5 – 95 % Non-operating 5 – 95 % Shock and Vibration Range 3 Shock Operating 1,000 G (Max) at 0.5 msec Non-operating 1,000 G (Max) at 0.5 msec 4 Vibration Operating 2.17 G
Inhaltszusammenfassung zur Seite Nr. 13
Intel® Solid-State Drive DC S3500 2.6 Reliability Intel SSD DC S3500 meets or exceeds SSD endurance and data retention requirements as specified in the JESD218 standard. Reliability specifications are listed in the table below: Table 14. Reliability Specifications Parameter Value Uncorrectable Bit Error Rate (UBER) Uncorrectable bit error rate will not exceed one sector in the 17 < 1 sector per 10 bits read specified number of bits read. In the unlikely event of a non-recoverable
Inhaltszusammenfassung zur Seite Nr. 14
Intel® Solid-State Drive DC S3500 2.7 Temperature Sensor The Intel SSD DC S3500 has an internal temperature sensor with an accuracy of +/-2C over a range of -20C to +80C which can be monitored using two SMART attributes: Airflow Temperature (BEh) and Device Internal Temperature (C2h). For more information on supported SMART attributes, see “SMART Attributes” on page 18. 2.8 Power Loss Capacitor Test The Intel SSD DC S3500 supports testing of the power loss capacitor, which can be moni
Inhaltszusammenfassung zur Seite Nr. 15
Intel® Solid-State Drive DC S3500 3.0 Mechanical Information Figures 1 and 2 show the physical package information for the Intel SSD DC S3500 in the 2.5- and 1.8-inch form factors. All dimensions are in millimeters. Figure 1: Intel SSD DC S3500 2.5-inch Dimensions X – Length -- * Y - Width Z - Height 100.45 Max 69.85 +/- 0.25 7.0 +0/-0.5 * - does not include 0.3 connector protrusion December 2013 Product Specification 328860-002US 15
Inhaltszusammenfassung zur Seite Nr. 16
Intel® Solid-State Drive DC S3500 Figure 2: Intel SSD DC S35001.8-inch Dimensions X - Length Y - Width Z - Height 78.50 +/- 0.60 54.0 +/- 0.25 5.0 +/- 0.35 Product Specification December 2013 16 328860-003US
Inhaltszusammenfassung zur Seite Nr. 17
Intel® Solid-State Drive DC S3500 4.0 Pin and Signal Descriptions 4.1 2.5-inch Form Factor Pin Locations Figure 3: Layout of 2.5-inch Form Factor Signal and Power Segment Pins Note: 2.5-inch connector supports built in latching capability. 4.2 1.8-inch Form Factor Pin Locations Figure 4: Layout of 1.8-inch Form Factor Signal and Power Segment Pins December 2013 Product Specification 328860-002US 17
Inhaltszusammenfassung zur Seite Nr. 18
Intel® Solid-State Drive DC S3500 4.3 Connector Pin Signal Definitions Table 15. Serial ATA Connector Pin Signal Definitions—2.5-inch and 1.8-inch Form Factors Pin Function Definition st S1 Ground 1 mate S2 A+ Differential signal pair A S3 A- st S4 Ground 1 mate S5 B- Differential signal pair B S6 B+ st S7 Ground 1 mate Note: Key and spacing separate signal and power segments. 4.4 Power Pin Signal Definitions Table 16. Serial ATA Power Pin Definitions—2.5-inch Form Fact
Inhaltszusammenfassung zur Seite Nr. 19
Intel® Solid-State Drive DC S3500 Table 17. Serial ATA Power Pin Definitions—1.8-inch Form Factors 1 Pin Function Definition Mating Order 2 nd P1 V 3.3 V Power 2 Mate 33 2 nd P2 V 3.3 V Power, per-charge 2 Mate 33 3 st P3 Ground -- 1 Mate 3 st P4 Ground -- 1 Mate 4 st P5 V 5 V Power; not connected. 1 Mate 5 4 nd P6 V 5 V Power; not connected. 2 Mate 5 5 nd P7 DAS/DSS Device Activity Signal/Disable Staggered Spin-up 2 Mate Key Key NC NC 6 nd P8 Optional Manufacturing Test Pin 2 Mate
Inhaltszusammenfassung zur Seite Nr. 20
Intel® Solid-State Drive DC S3500 5.0 Supported Command Sets Intel SSD DC S3500 supports all mandatory ATA (Advanced Technology Attachment) commands defined in the ATA8-ACS specification described in this section. 5.1 ATA General Feature Command Set The Intel SSD DC S3500 supports the ATA General Feature command set (non- PACKET), which consists of: − EXECUTE DEVICE DIAGNOSTIC − SET FEATURES − IDENTIFY DEVICE Note: See Appendix A, “IDENTIFY DEVICE Command Data” on page 27 for details
