Inhaltszusammenfassung zur Seite Nr. 1
IBM 32X/10X/40X/16X MAX
CD-RW/DVD-ROM
Combination Drive
User’s Guide
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive User’s Guide
Inhaltszusammenfassung zur Seite Nr. 4
Note: Before using this information and the product it supports, read the information under Appendix D, “Product warranty and support information” on page D-1 and Appendix E, “Notices” on page E-1. First Edition (July 2002) © Copyright International Business Machines Corporation 2002. All rights reserved. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Inhaltszusammenfassung zur Seite Nr. 5
Safety: Read first Before installing this product, read the Safety Information. Antes de instalar este produto, leia as Informações de Segurança. Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí. Læs sikkerhedsforskrifterne, før du installerer dette produkt. Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information. Avant d’installer ce produit, lisez les consignes de sécurité. Vor der Installation dieses Produkts die Sicherheitshinweise lesen. Pr
Inhaltszusammenfassung zur Seite Nr. 6
Antes de instalar este produto, leia as Informações sobre Segurança. Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy. Antes de instalar este producto lea la información de seguridad. Lässäkerhetsinformationen innan du installerar den här produkten. iv IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive: User’s Guide
Inhaltszusammenfassung zur Seite Nr. 7
Contents Safety: Read first ....................iii About this book ....................vii Registering your option ..................vii Installation and user’s guide................1-1 Product description ...................1-1 Installationrequirements..................1-2 Beforeyoubegin ....................1-2 Handlingprecautions..................1-2 Drive controls and connectors...............1-3 Installing the drive....................1-4 Step1.Openingthecomputer...............1-4 Step 2. U
Inhaltszusammenfassung zur Seite Nr. 8
Warrantyinformation ..................D-1 Warranty period ....................D-1 Service and support...................D-1 WarrantyinformationontheWorldWideWeb .........D-1 Online technical support ................D-1 Telephone technical support ...............D-2 IBM Statement of Limited Warranty Z125-4753-06 8/2000 ......D-3 Part1-GeneralTerms .................D-3 Part 2 - Country-unique Terms ..............D-6 Appendix E. Notices ..................E-1 Trademarks......................E-2 Elec
Inhaltszusammenfassung zur Seite Nr. 9
About this book ® This manual contains instructions for installing and using the IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive. The manual is divided into the following parts: Part 1: Installation and user’s guide This guide contains the product description and installation instructions in the following languages: v English v French v German v Spanish v Italian v Brazilian Portuguese v Simplified Chinese v Traditional Chinese v Japanese Part 2: Appendixes This section contains device-d
Inhaltszusammenfassung zur Seite Nr. 10
viii IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive: User’s Guide
Inhaltszusammenfassung zur Seite Nr. 11
Installation and user’s guide This section contains the product description, hardware and software installation instructions, and operating information for the IBM 32X/10X/40X/16X MAX CD-RW/DVD-ROM Combination Drive. Product description This product contains a unique multifunction drive that can read and write CD-R and CD-RW discs, and can also read CD-ROM, DVD-ROM, DVD-RAM, DVD-RW, and DVD-R discs. This kit also includes a CD containing an Online User’s Guide, MPEG-2 decoding software and CD re
Inhaltszusammenfassung zur Seite Nr. 12
Installation requirements Be sure that your computer meets the following system requirements before installing the drive: v Minimum microprocessor: ® ® – Intel Pentium 133 MHz – Intel Pentium II 233 MHz for MPEG-2 playback v Minimum RAM: 32 MB v Windows 2000, Windows Me, Windows XP Home, or Windows XP Professional operating system v An available half high drive bay v An available IDE connection v 40 MB available hard drive space v 700 MB available hard drive space for CD copy function v Audio so
Inhaltszusammenfassung zur Seite Nr. 13
Drive controls and connectors The following diagrams show the location and functions of the drive controls and connectors. Front view of the drive: ReWritable PLAYER 1Busy indicator This light comes on when the drive reads from or writes to a disc. 2Emergency eject hole This hole provides access to the eject mechanism to remove a disc from the drive. 3Open/Close button This button opens and closes the disc drawer when you push it. Installation and user’s guide 1-3 High Speed
Inhaltszusammenfassung zur Seite Nr. 14
Rear view of the drive Pin 1 1Audio-out connector This connector transmits the analog audio signals to an audio adapter. 2Configuration pins These pins are used to set the drive configuration. 3IDE connector This connects the CD-RW/DVD-ROM Combination Drive to the IDE cable. 4Power connector This connects the CD-RW/DVD-ROM Combination Drive to the power cable. Installing the drive Follow these steps to install the CD-RW/DVD-ROM Combination Drive: Step 1. Opening the computer 1. Turn off
Inhaltszusammenfassung zur Seite Nr. 15
Step 3. Setting the configuration jumpers You can configure your drive as master 1, slave 2, or cable-select 3,by placing the jumper over the configuration pins as shown. Use the following guidelines to determine the correct configuration for your CD-RW/DVD-ROM Combination Drive. v Configure the CD-RW/DVD-ROM Combination Drive as a master if it will be the only device that is connected to the IDE cable. This is the preset configuration. v Configure the CD-RW/DVD-ROM Combination Drive as a
Inhaltszusammenfassung zur Seite Nr. 16
Step 4. Selecting an IDE connector Newer computers typically have two IDE connectors. If your computer has two IDE connectors, use the secondary IDE connector to connect the CD-RW/DVD-ROM Combination Drive. Typically the secondary IDE connector is adjacent to the primary IDE connector that connects to your hard disk drive. The IDE connector you select and the cable position you select will determine which configuration jumper setting you will use for the drive. v If you have two IDE connectors,
Inhaltszusammenfassung zur Seite Nr. 17
3. Thread the screws in loosely to check their position. Two screws are usually used on each side. Verify that the alignment is correct; then tighten the screws to secure the drive. Do not overtighten. Step 6. Attaching the cables to the drive The following diagram shows where to connect the cables to the drive. Installation and user’s guide 1-7
Inhaltszusammenfassung zur Seite Nr. 18
The following is an illustration of the internal audio cable that comes with your option package. 1. The internal audio cable has a split-connector end and a single-connector end. Connect one of the split-connector ends 1to the audio-out connector on the CD-RW/DVD-ROM Combination Drive. If you have another CD-ROM, CD-RW or DVD-ROM drive, attach the other split-connector end to the audio-out connector on this drive. Attach the single-connector end to your sound adapter. 2. Attach a 40-pin IDE-c
Inhaltszusammenfassung zur Seite Nr. 19
3. Reinstall the computer cover. 4. Reconnect all external devices. 5. Plug all power cords into the electrical outlets. Step 8. Updating your computer configuration After you have completed the hardware installation, restart your computer. Usually, the configuration-setup information screen is displayed when you turn on your computer. If you do not see this screen, check your computer documentation for information about accessing the configuration or setup utility program. To see the configurat
Inhaltszusammenfassung zur Seite Nr. 20
your system manual to determine what video hardware you have. To install them, use the Add New Hardware feature of your operating system. Step 10. Setting up your computer for DVD video playback This section provides instructions on enabling DMA settings so you can play DVD movies with your DVD-ROM drive. 1. Right click on My Computer on the desktop or in the Start Menu. 2. Select Properties from the pop-up menu. 3. Check your operating system, and then follow the appropriate instructions for en
