Inhaltszusammenfassung zur Seite Nr. 1
AF-S50CX
AF-S60CX
AF-R50CX
AF-R55CX
AF-R60CX
AF-R70CX
ROOM AIR CONDITIONER
INSTALLATION AND OPERATION
MANUAL
CONTENTS
PAGE
FOR YOUR PROTECTION.................... 2
CONSUMER LIMITED WARRANTY ..... 3
INSTALLATION INSTRUCTIONS
• CHECK WINDOW AREA ........................ 4
• LOCATlON .............................................. 4
• ACCESSORIES ...................................... 5
• SUGGESTED TOOLS ............................ 5
• INSTALLATION.......................
Inhaltszusammenfassung zur Seite Nr. 2
FOR YOUR PROTECTION To aid in answering questions if you call for service or for reporting loss or theft, please record below the model and serial number located on the right side of the unit. MODEL NUMBER SERIAL NUMBER DATE OF PURCHASE Dealer Name Address City State Zip Telephone TO PHONE: Dial 1-800-BE-SHARP (237-4277) for: SERVICE (for your nearest Sharp Authorized Servicer) PARTS (for your Authorized Parts Distributor) ACCESSORIES ADDITIONAL CUSTOMER INFORMATION TO WRITE: For service proble
Inhaltszusammenfassung zur Seite Nr. 3
CONSUMER LIMITED WARRANTY CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth be
Inhaltszusammenfassung zur Seite Nr. 4
INSTALLATION INSTRUCTIONS Before beginning installation, read these instructions carefully. Use the enclosed MOUNTING KIT for proper installation. CHECK WINDOW AREA The mounting kit is designed for wooden sill double or single hung sash-type windows. Minimum opening Mounting kit fully closed Mounting kit fully opened (Without mounting kit) 23 21 7 17 / " (450mm) 21 / " (550mm) 33 / " (850mm) 32 32 16 Window opening from stool to lower 27 sash bottom must be 14 / " (377mm) 32 Lower sash bottom
Inhaltszusammenfassung zur Seite Nr. 5
INSTALLATION INSTRUCTIONS ACCESSORIES 1 No. Accessories Q'ty 1 Right closure assembly 1 2 2 Left closure assembly 1 3 Window sash foam seal 1 3 Window sash foam seal 1 4 (adhesive type) 5 Bottom gasket 1 4 6 Screws (L=1", 25.4mm) 7 5 13 7 Screws (L= / ", 10mm) 6 32 6 7 8 Base pan angle 2 6 7 9 Remote control 1 10 Battery 2 8 Remote control hook 1 11 2 9 11 10 2 SUGGESTED TOOLS 1. Screw driver (medium size Phillips) 2. Tape measure or ruler 3. Knife or scissors 5
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION INSTRUCTIONS INSTALLATION WARNING: Make sure the unit is turned off and unplugged before working. Sash Cut the window sash foam seal (adhesive 1 type) to the proper length and attach it to the underside of the window sash. Window sash foam seal Jamb (adhesive type) Sill Insert the right closure assembly and the left closure assembly into the top angle 2 and the bottom channels. Secure the right and left closure to the cabinet with six of the provided screws. 13 Closure as
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLATION INSTRUCTIONS Closure assembly (Left) Insert the closure assemblies on both sides into the rails of the jamb. 5 Jamb (Left) Indoor side Closure assembly (Left) Indoor side 1/2 inches (13mm) Sill Stool Loosen screws on both sides of the 6 cabinet, then hang the base pan angle on and secure the screws again. Secure the base pan angle to the sill by 7 using the hole of the front side on the angle with one screw. (L=1", 25.4mm) Top angle Secure the top angle o
Inhaltszusammenfassung zur Seite Nr. 8
PRECAUTIONS CAUTION FOR USE IMPORTANT: Points to keep in mind when using your air conditioner. • Install the air conditioner by following the installation instructions given in the previous section of this manual. • Make sure the unit is the correct capacity for the area you want to cool. • Do not modify any part of this product. • Do not insert objects into any part of the unit. • Push the AC power plug securely into the receptacle and make sure it is not loose. • Use power circuit with a prope
Inhaltszusammenfassung zur Seite Nr. 9
PRECAUTIONS NOTES ON OPERATION • Allow 3 minutes for the compressor to restart cooling. If you turn the air conditioner off and immediately restart it, allow three minutes for the compressor to restart cooling. There is an electronic device in the unit that keeps the compressor off three minutes for protection. • If a power failure occurs during use, allow 3 minutes before restarting the unit. After power is reinstated, restart the air conditioner. If the power was off for less than three minute
Inhaltszusammenfassung zur Seite Nr. 10
HOW TO OPERATE PARTS NAMES UNIT 1Front Cabinet 4 5 6 3 2Air Inlet (Indoor Side) 7 3Horizontal Louvers 4Vertical Louvers 8 5Air Outlet (Indoor Side) 6Control Panel 7Rear Cabinet 9 8Air Inlet (Outdoor side) 9Filter (Pull the filter handle 10 to the right to remove.) 2 0Filter Handle qPower Cord 1 11 CONTROL PANEL AF-S50CX, S60CX, R50CX, AF-R55CX R60CX, R70CX 2 1 2 1 11 11 F F POWER POWER ON/OFF ON/OFF hr hr 10 10 COOL / FAN TEMP COOL / FAN TEMP 3 3 TIMER ENERGY TIMER ENERGY SELECTOR SELECTOR ON/O
Inhaltszusammenfassung zur Seite Nr. 11
HOW TO OPERATE COOLING OPERATION POWER Touch POWER ON/OFF pad. indicator SELECTOR indicator 1 • The unit is preset at 74°F and HIGH COOL. This will show in the display when the power is first turned on. F POWER ON/OFF • POWER indicator and SELECTOR in- hr dicator (COOL) will light. COOL / FAN TEMP TIMER ENERGY SELECTOR To turn off the unit, touch POWER ON/OFF SAVER 2 ON/OFF pad again. • POWER indicator and SELECTOR indicator will go off. POWER ON/OFF pad TO CHANGE TEMPERATURE SETTING During c
Inhaltszusammenfassung zur Seite Nr. 12
HOW TO OPERATE TO CHANGE FAN SPEED AND OPERATION MODE SELECTOR indicator During operation Touch SELECTOR pad and select the F operation mode and fan speed. POWER ON/OFF hr • SELECTOR indicator and display will light in order as you touch. COOL / FAN TEMP TIMER ENERGY HIGH COOL MED COOL LOW COOL SELECTOR ON/OFF SAVER LOW FAN MED FAN HIGH FAN SELECTOR pad NOTES ON OPERATION MODE: MODE SELECTOR DISPLAY Cooling operation with high fan speed. COOL HIGH COOL Cooling operation with medium fan speed. ME
Inhaltszusammenfassung zur Seite Nr. 13
HOW TO OPERATE ENERGY SAVER During normal operation, the thermostat automatically controls cooling and the fan runs continu- ously. When the ENERGY SAVER is selected, the thermostat automatically controls cooling and the fan automatically stops when the compressor is not operating. (Fan will stop 30 seconds after the compressor stops. Even after the fan stops, the fan will rotate for 2 minutes, every maximum 20 minutes, to detect room temperature.) During cooling operation ENERGY SAVER indicator
Inhaltszusammenfassung zur Seite Nr. 14
HOW TO OPERATE ON TIMER OPERATION • This unit has a built-in timer that can be programmed to start the unit up to 12 hours in advance. You can set the timer to start in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance of the start time, or in 1 hour increments from 10 to 12 hours in advance of the start time. • The unit will start automatically according to your setting. When the unit is not operating SELECTOR indicator Touch the TIMER ON/OFF pad to set the 1 delayed start time. F
Inhaltszusammenfassung zur Seite Nr. 15
HOW TO OPERATE OFF TIMER OPERATION • This unit has a built-in timer that can be programmed to shut the unit off up to 12 hours in advance. You can set the timer to stop in increments of 30 minutes (0.5 hours) up to 9.5 hours in advance of the stop time, or in 1 hour increments from 10 to 12 hours in advance of the stop time. • The unit will stop automatically according to your setting. When the unit is operating Touch the TIMER ON/OFF pad to set the 1 delayed stop time. F POWER • The time settin
Inhaltszusammenfassung zur Seite Nr. 16
HOW TO OPERATE USING THE REMOTE CONTROL INSTALLING BATTERIES Use two size-AAA (R03) batteries. Remove the battery compartment cover. 1 Insert the batteries in the compartment, 2 making sure the and polarities are properly aligned. Battery compart- ment cover Replace the cover. 3 NOTES: • The battery life is approximately one year with normal use. • When you replace the batteries, always use two new ones of the same type. • If the remote control does not operate normally after replaci
Inhaltszusammenfassung zur Seite Nr. 17
HOW TO OPERATE OPERATING WITH THE REMOTE CONTROL TRANSMITTER POWER ON/OFF POWER ON/OFF button Push to start or stop the operation. TEMP. TEMPERATURE setting button TEMP. ---Raise temp. setting 1°F at a time. TEMP. TEMP. ---Lower temp. setting 1°F at a time. HIGH COOL SELECTOR SELECTOR button MED COOL Push to change fan speed and operation SET TIMER/OFF LOW COOL mode. Fan speed and operation mode HIGH FAN selections are shown to the right. MED FAN SET TIMER/OFF button LOW FAN Push to set delay "
Inhaltszusammenfassung zur Seite Nr. 18
CLEANING AND MAINTENANCE CLEANING THE FILTER If the filter is clogged with dust, the amount of air flow will be reduced, resulting in poor cooling performance. The filter should be cleaned every 10 days. At the beginning of every cooling season or after a long period of inactivity, clean the filter before starting the unit. REMOVE THE FILTER 1 Gently pull the filter handle to the right and slide the filter out from the unit. CLEAN THE FILTER 2 To remove dust from the filter, u
Inhaltszusammenfassung zur Seite Nr. 19
BEFORE CALLING FOR SERVlCE IF YOUR AIR CONDITIONER DOES NOT OPERATE PROPERLY, PLEASE CHECK THE FOLLOWING ITEMS BEFORE CALLING FOR SERVICE. AIR CONDITIONER DOES NOT OPERATE AT ALL • Is the unit plugged in or is the plug loose? • Is the fuse blown or the circuit breaker tripped? • Did you restart the unit within 3 minutes after a power failure? If the power was off for less than 3 minutes, and you restarted the air conditioner within 3 minutes, a protective device may cause the compressor to shut
Inhaltszusammenfassung zur Seite Nr. 20
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION Osaka, Japan Printed in Thailand TINSEA292JBRZ 01LO TL 1
